I have openvpn server configured with bridged interface on my openwrt router. The client is running ubuntu 9.10 with config:
Client dev tap proto udp remote x.x.x.x 1194 resolv-retry infinite nobind persist-key persist-tun ca /home/blwegrzyn/openvpn/ca.crt cert /home/blwegrzyn/openvpn/client1.crt key /home/blwegrzyn/openvpn/client1.key comp-lzo verb 5 (x.x.x.x was hidden)
When the client connects the log says: WRRRWRSat Jan 9 20:16:03 2010 us=332404 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 192.168.1.241,route-gateway 192.168.1.254,ping 10,ping-restart 120' ..... Sat Jan 9 20:16:03 2010 us=343906 ERROR: Linux route add command failed: external program exited with error status: 7
The server is trying to push default gateway 192.168.1.254 to the client and the client is on 192.168.2.0 network as you can see the route addition fails with SIOCADDRT: No such process. This is because the tap interface does not have any ip and the route addition is not possible. The tap interface is not getting the dhcp address through the tunnel, not sure why (this works on XP). To fix the problem I must manually add the ip to the tap interface, and the default gateway, but then i must add dhcp server to resolv.conf to make it work and once I disconnect the computer does not know the old valid dhcp anymore and cannot communicate. Why openvpn cannot get the ip automatically? Why it cannot grab the dhcp from the tunnel? Is it related to the wireless card being managed by the network manager? This works perfect on windows machine (xp sp3).
I'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
I have set up my Openvpn Server in Centos and it is working fine. Windows XP clients are able to connect the OpenVPN Server and access the network. This is a customized OpenVPN Gui Client. Now I need the customized OpenVPN Client for MS Windows 7Bit. I am using openvpn-2.1.4-install OpenVPN Client in MS Windows 7 64Bit. This is a executable and working fine in the said architecture. Now I want to compile this version. I am following the given steps at : [URL].. As per the direction i have copied the source from 2.1.4 and tried to compile, but compiled copy is giving the error " An error occurred Installing the TAP-Win32 Device Driver". I have tried this compilation by making every change and hack but all in vain.
I think that there are some certain steps which are missing and not documented any where. And sure that someone in forum will know the facts.
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
What client can I use on a MAC to connect to an openvpn server? All the client s seem to use password connections whereas the openvpn server uses certificates.
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
This is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
I'm using Fedora Core 11 and the client OpenVPN on the network-manager into a segmented infrastructure. It works well.
My laptop is on a dmz wireless Zone 192.168.3.0/24 and access Internet through a firewall via a front-end zone 192.168.65.0/24 with wlan0 interface.
But my laptop can access on a back-end zone 192.168.2.0.24 to a server.
When I start the OpenVPN tunnel, I cannot access on my back-end zone because the kernel routing table is modified (all the traffic is routed through the tun vpn interface)
If I define a static route like route add -host 192.168.2.x gw 192.168.3.2 where x is my file serveur, I cannot connect to this server because the routing is make through the tun interface and not by the wlan0 who can access on is gateway
I want to know where changing the kernel routing table file to access on the Internet and on my back-end zone in a same time.
We're setting up an OpenVPN access server, a quite straight-forward and very customizable system. Only we have a problem, I guess caused by Apache, when we try to reach the client web server via a custom port (see screenshot in attachement) we get the following error: Code: 501 Not Implemented. The requested method is not implemented by this server. Although we have added on the cisco router a port forwarding for port number 9943. It is working when we access the website : port with the local IP address [URL]...
In windows using remote desktop connection you can press Ctrl+Alt+minus to copy the current window on the remote desktop to the clipboard. How do you do that in Ubuntu's terminal server client? I have not found any key combination that works
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File dev tun 0 ifconfig 192.168.0.1 192.168.0.2 cd /etc/openvpn secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
So this has happened to me several times with fedora 12, and granted I havn't rebooted in a while but it seems that after I update and reboot, I cannot log into GDM any longer.I can login to the CLI, so and I checked all my logs to make sure it wasn't an authentication error.What does happen though, is when I try and login to KDE the screen flickers likes loading the desktop and then spits me back out to the login prompt.var/log/messages reports successful login.Here is what i did find
** (process:2220): DEBUG: Greeter session pid=2220 display=:0.0 xauthority=/var/run/gdm/auth-for-gdm-H2QyqS/database Failed to play sound: File or data not found
I'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion) I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
I am trying to connect to an existing VPN server that I have been using for years now. I am moving my develpment environment over to a Ubuntu box and I must have openvpn working in order to access SVN. It has been a few years since I have been setting up linux boxes. And networking is a soft spot for me. But
The server has been running without problem for a LONG time. A windows computer I have been using connects to it fine and I can access the network on this machine. I am setting up a new computer, but when trying to connect openvpn starts the initialization sequence completes but I cannot ping the network I am trying to connect to.
I use a second VPN connection to connect to an alternative network and it works fine. The difference between these two is that the working vpn connection is a routed IP tunnel and the one that is not working is a bridged connection.
The VPN that is working on this box brings up tun0 while the bridged connection connects but does not bring up a network tun device. The server logs look normal, it just looks like the client is not setting itself up to use the network once connected. (The key/cert pair work find when on a windows box) Just not on this new ubuntu build.
My current client config
Quote:
cert eric@home.crt key eric@home.key client dev tap
[Code]....
The server is using tap, as well as the working windows client uses "dev tap"
It has been a long time since I have been maintaining linux boxes but its coming back slowly.
I have a ubuntu 9.10 box that is acting as my firewall. ETH0 is connected to a cable router and my eth1 nats out it. I have br0 bridged to eth1 (private). I am able to ping from my openvpn client into my network but not from a boxon my local network to the openvpn client I watched the firewall and nothing is being blocked on any device. I checked the arp table on my firewall and it does not know about my vpn clients. Any idea's why my vpn clients are not adding themselves to the arp table?
I'm using openvpn-2.0.9 with gui-1.0.3 which is set up on windows xp machines(for server and clients) when i set up the server and one client it connects well and i can work without a problem. but when the second client connects it gets the same ip address of the client1, so that both clients can't work at once.
my server and client config files are as follows.
server-configuration file
client1-configuration file
client2-configuration file
I've tried by changing many settings such as server-bridge and all but couldn't find a solution for the problem.
By the way when connected server gets 10.8.0.1/30 and every clients get same ip as 10.8.0.6/30
I am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
I hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
I have a virtual private server running ubuntu server edition that I have set up as an openvpn client. The problem I have is that the moment I turn on openvpn, I am no longer able to ssh into the machine. Is there a way to enable me to connect to it even when it is tunneling?
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
