Ubuntu :: 10.04 Splash Screen Garbled On Acer Aspire Laptop?
May 1, 2010
I upgraded my wife's old Acer Aspire 1350 laptop to Lucid Lynx, which works fine, except for the fact that the splash screen both when the OS boots and is shut down is completely garbled and unreadable. The screen is also unreadable when accessing a tty via CTRL+ALT+F2 etc. The GNOME desktop resolution is completely unaffected and is perfectly usable. The splash screen works on MY desktop PC, but it does seem to be using some strange video timings, as my monitor recognises it as 640x480 but doesn't seem able to centre the screen properly. I strongly suspect that this is the cause of problem and my wife's laptop display just does not like the video mode. If I plug my wife's laptop into my monitor, it displays OK.
View 2 Replies
ADVERTISEMENT
Oct 20, 2010
I want to install Ububtu Desktop 10.10 on my old Acer Aspire 3693WLMi laptop. Where can I find drivers for this hardware? I think the main problem will be WLAN adapter driver.
And what's about Russian localization in current Ubuntu release? All is OK, am I right?
View 1 Replies
View Related
Aug 26, 2010
I have a ACER Aspire laptop with a webcamera. how to use it? I have Ubuntu 10.04 installed.
View 5 Replies
View Related
May 6, 2011
I can get wired internet if i connect the laptop to the router, but no wifi since I think I dont have the drivers. i dont see anything in aditional drivers.
View 2 Replies
View Related
Feb 25, 2010
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
View 7 Replies
View Related
Jan 17, 2010
I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.
Don't know if it helps however when I tpye iwconfig I get:
ladb:/home/nigel# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
View 14 Replies
View Related
Apr 8, 2010
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
View 4 Replies
View Related
Feb 11, 2016
Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
View 11 Replies
View Related
Oct 14, 2010
I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.
View 4 Replies
View Related
Jan 14, 2010
I have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
<6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
[code]...
View 4 Replies
View Related
Jun 18, 2010
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
View 2 Replies
View Related
Jul 25, 2011
My landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
View 1 Replies
View Related
Jan 24, 2011
I have an Acer Aspire 5742Z with an Intel HD Graphics card and if I connect an external monitor I have no troubles using RHELS 5, but nothing on my main laptop monitor.
View 2 Replies
View Related
Jun 12, 2011
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
View 4 Replies
View Related
Apr 29, 2011
Is there a problem with Intel video cards and 11.04? I have tried upgrading and using a live CD and live USB with the same results on this notebook. After upgrading or booting off live CD/USB, I see a black screen, not lit. I can here the login prompt and when I press [Enter] and type my password I hear the Ubuntu theme which means everything is up, but still have a black screen. If I try to go to a console, I am still working with a black screen. Yikes ... I know my Live CD is ok, because it boots fine on my Lenovo S10-3 netbook.
Upgraded from Ubuntu 10.10 32 bit, live CD is 11.04 32 bit. Hardware: Acer Aspire 5732Z with Intel Mobile 4 series chipset integrated graphics controller (rev 09) and 3Gb ram.
View 9 Replies
View Related
Jun 16, 2011
My Aspire's LCD was heavily cracked and I would like to replace it myself. I ordered a new screen in the mail, which just arrived, and pulled up an online guide to replacing the screen. However, it would appear that these guides deal with older models.
All the guides state that the screen can be removed by popping off six rubber things around the edge of the faceplate, revealing the screws underneath. I popped the rubber thingies off to find no screws, but was able to pull the faceplate off except for the bottom, which seems secured to the base by two screws on either side. I cannot get to these screws because they are each covered by two round pieces of plastic which are level with the faceplate.
I will take it to a computer repair place if necessary, but I would really like to try to get this done myself first.
Has anyone had success with removing the faceplate of a later model Aspire One? My exact model is D255E-13111
View 3 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Jun 10, 2010
Last weekend I installed Ubuntu 10.4 (Netbook remix) on my new Acer Aspire 751h. The installation seemed to go smoothly, but I've noticed several things that don't work as well as on my old AA 110. I should say that I installed Ubuntu in a dual-boot setup with Windows XP, which the machine already had installed. Firstly, the screen brightness can't be adjusted with the function key/hotkey combination. The sound volume hotkeys work fine, and the brightness hotkeys work with XP, so it's not a hardware issue. The default brightness is pretty dim, so this is an annoying problem. Is there a way to bind the hotkeys to the 'increase/decrease brightness' functions?
Secondly, the vertical scroll bar on the desktop doesn't work, by which I mean if I click above or below the highlighted area no scrolling takes place. However, I can drag the highlighted area up or down and scrolling does take place, and scrolling via the touchpad works. All forms of scrolling work normally within applications. Is there anything I can do to fix this? It's only a mild annoyance, though. Thirdly, in the power management preferences application I don't have an 'On Battery Power' tab - just 'On Mains Power' and 'General'. There are some other peculiarities that probably follow on from this. I have a power indicator in the top panel of the desktop, but on bootup it's a 'lightning bolt' icon rather than the battery-shaped icon it should be. If I plug into mains power, it changes to a battery-shaped 'charging' icon until it's fully-charged, when it changes back to the lightning bolt. If I then unplug the mains power, I get a battery-shaped 'discharging' icon, but this doesn't survive a restart. Obviously, a battery level indicator is very useful and I'd like to get it working properly. The help file for power management preferences says something about GConf policy keys that need to be made writable in order to display some sliders and option boxes. I certainly don't have as many sliders and options as shown in the help file. I guess this might be related to the screen brightness problem.
Finally (for now - I haven't explored everything yet) the screen ratio looks wrong. Circular icons appear as ovals. It looks like the software thinks I've got a 4:3 ratio whereas really it's widescreen. I can't see where I can change this. I've looked in 'System.. Preferences. Monitors' but there's nothing I can change there. System testing shows the apparent resolution at 1024x768, whereas the hardware spec is 1366x768. I'm wondering whether to try to fix these things individually or whether a better option might be a reinstall - perhaps without the XP dual boot. What do you think? I'm willing to change settings from the terminal but I'd need to be told exactly where to go and what to do.
View 2 Replies
View Related
Mar 14, 2011
I have an Acer 4810T laptop with Intel graphics. I run openSUSE 11.3, and am about to upgrade to 11.4. But both systems still have a very bad bug with screen brightness. The Fn+Arrow keys do change screen brightness, but after using them the system is rendered extremely sluggish and unresponsive. This sluggishness is most pronounced with a very important Wine app I need to use. The only way to fix the sluggishness is to reboot. With 11.4, the problem is worse because the system boots and automatically partially dims the screen, thus making it even more necessary to change the brightness. Neither Gnome nor KDE are able to change the brightness via their power managers. This means that I can't dim my screen automatically upon disconnecting the A/C power.
I have read many experiences from Ubuntu and openSUSE users, who all have the same problem. I have tried both intellegacy and the new intel drivers, and they both have the problem. I have read that some users have improved the situation by upgrading or downgrading the BIOS. Others have been experimenting with kernel patches:
[URL]
View 1 Replies
View Related
Apr 28, 2011
This fixed a black screen issue and a brightness adjustment issue after installation of ubuntu. Also on 11.04 I couldn't get Unity to work until I edited grub I didn't come up with the fix but it took me forever to find a solution so I figured I would post it. If I have did something wrong just get a mod to delete or move this. I don't use forums often.
Code:
sudo gedit /etc/default/grub
Edit two lines to read as follows:
[code]....
View 8 Replies
View Related
Nov 19, 2010
I'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
View 5 Replies
View Related
Feb 26, 2010
i tried to install ubuntu 9.10 in my acer aspire lap. i got the ubuntu CD by parcel.i was able to select the language, then second option -install ubuntu also went rite, after that nothing is happening. how can i correct it?
View 3 Replies
View Related
May 11, 2010
i have a acer aspire one ssd version. and have installed ubuntu 10.04, and my webcam has stopped working.
it always used to work in 9.10. but has now programs such as cheese says that i do not have a camara plugged in.
View 9 Replies
View Related
Apr 25, 2010
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies
View Related
Jan 26, 2011
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
Oct 25, 2010
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies
View Related
May 17, 2010
in compliance with bonekracker's advice, i have reposted my SOS. i have the result of the outputs of the commands for ifconfig, iwconfig, and etc i have uploaded it in the file output.doc. i hope this would be helpful in debugging my problem.but before that, i do notice that if i click on the icon for the Network Manager, the Wireless networks is set to 'wireless disabled'. maybe if i can make it turn on, my wireless problem will be solved.. its just that i even if i move the switch for the wifi, it still wouldn't turn on.
View 9 Replies
View Related
Jun 9, 2010
The problem now is that I cant get online. I have an Acer Aspire 5720. My network card is called Broadcom BCM4311 802.11b / g WLAN. What do I do? I've googled around and found various forum posts where I'm told that I must write various things in Terminal, which have not yet worked. I have also visited this site, where this is the first step: Open System → Administration → Networking. But the problem is that I can not find the "Networking" under "Administration". I have no experience with Linux what so ever, Ninja-edit: I tried reading through this, but I fell off at Make the .ko file
View 2 Replies
View Related
