I have successful installed debian squeeze 32bit on my pc. I like very much The vlc i have installed via software but After install vlc don't start don't appear don't do nothing any one know there is a problem with Vlc On squeeze?
View 10 Replies
Does this latest nVidia driver (version 260.19.12) work with the default Linux kernel in Debian Squeeze? And does it require any additional packages before installation?
(I cannot test it myself, since it's my brother who recently bought a new nVidia card)
I use a net install CD to install the Debian 6.0.1(squeeze). After installation of gnome, I use apt install the mplayer. But when I use the mplayer open a avi file, it failed. The mplayer don't crash but give the following instruction:
Mplayer interrupted by signal 6 in module: filter_video
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you thin it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. [This binary of MPlayer in Debian is currently compiled with '--enable-debug'; the debugging symbols are in the package 'mplayer-dbg'.] I don't know why this happen, because all the package is installed with apt.
Previously (on Lenny) I would boot my computer and it would happily boot through to the Gnome login page (the pretty graphical one). Now (on Squeeze) I get the plain old text login prompt. So I login normally and try running "startx". It comes up with a black screen and a mouse pointer. Nothing else. Ctrl+shift commands seem to work so I am able to get to another terminal. When I switch back to the first terminal there are just come Gnome startup messages.
I really need to have this working in order to do some "work". give me a sure fire way of either fixing this, even if it means instructions on re-installing Gnome? Normally I could copy log files from my Linux machine to my email computer but with no desktop I find this too difficult and really don't have the time to spend working out how to do it. (I have "work" to do as well). So, just briefly I will summarise the Xorg.0.log file:
[Code]....
I'm running Debian Squeeze on my laptop my laptop speakers do not work but when i plug in something into the headphone jack I then have sound (to the speakers plugged into my headphone jack).
View 7 Replies View RelatedSince upgrading my laptop to Squeeze, terminals (tested Gnome terminal and xterm) show simply a "$" prompt; machine, path and username are missing. What's really annoying though is that tab completion doesn't work, it inserts a tab character instead. Fooling around showed me that typing in the command "bash" brings everything back to what I'm used to. So in my dire newbiness do I ask, how do I reenable bash as the default shell for these programs?
View 5 Replies View RelatedAfter using testing (now Wheezy) for almost a year and breaking my machine (latest nvidia broken packages), I went back to vanilla Squeeze (after updates, now at 6.02).Nothing from outside the stable repos; not even the nvidia driver (kept it at default and nouveau)Repo "deb http://www.debian-multimedia.org stable main non-free" enabled.It seems flash is not working with iceweasel; I either have a message which says "Cannot play media: you do not have the correct version of the flash player. Download the correct version," with a link to Adobe's site, of media appears in broken pieces.In order to keep my system "clean," I haven't downloaded anything from Adobe, and a search on this forum suggested installing flashplugin-nonfree or flashplayer-mozilla. Did both (can't have them at the same time), restarted, no joy.
~$ apt-cache policy flashplayer-mozilla
flashplayer-mozilla:
Installed: 2:10.3.181.26-0.1
[code]...
Is Squeeze incompatible with a PS/2 wheelmouse?
View 7 Replies View Relatedtrying to get wireless usb's to work with a fresh install of Squeeze and I'm having no luck!one is the rt28070 (Linksys) and the other one is a D-Link DWL-132 I'm at my wits end; trying to get this working for a friend and its driving me bananas!!
View 11 Replies View RelatedUsing coolbits allows for me to try to change it but it refuses to accept it, and even when i run it as root it still just acts like nothing has changed. It's not my laptop maker since i can overclock my gpu using rivatuner on windows so it's clearly not them trying to restrict me. I was attempting to restore teh clocks back to what the factory settings were from nvidia and not the underclocked settings that the oem put on it for the 3d settings and then reducing the 2d by ~10% to help it run cooler except when gaming.Has anyone been able to successfully use coolbits in squeeze? Or is there another nvidia overclockign tool out there besides nvclock since my gpu is apparently too new to work with it and i'm not going to risk it.
View 2 Replies View RelatedI want install ati 5470 driver on debian squeeze .But i can't !I use this instruction : http://www.debianadmin.com/how-to-insta ... ebian.html When i enter below command , show an error(cp: cannot stat `/home/alireza/fglrx-install.rw8UHP/x710/*': No such file or directory
Package build failed! or otherthing.) :# sh ati-driver-installer-8-12-x86.x86_64.run --buildpkg Debian/testing
error:
alireza@alireza-debian:~$ sudo sh ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
[code]....
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
I have installed the Squeeze testing version. i have setup networking for static in the /etc/network/interfaces file. tried to find resolv.conf in the /etc/ since could not find i created this file post trying to start the eth1 i am able to ping my ip, but if try to ping the gateway i get an error saying the ping is not sucessfull. I have 2 network cards, eth0 and eth1. as eth0 does not work i have configured eth1. The dump of the interfaces file is below
[code]...
The same setup works fine in Ubuntu 10.10 setup that i have.
I installed squeeze and followed the instructions concerning b43-fwcutter and obtained firmware for my broadcom wlan interface. So my wlan worked for a while, but it just ceased functioning, for no obvious reason.
# lspci | grep WLAN
04:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
# dmesg | grep b43
[1.283080] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[1.283092] b43-pci-bridge 0000:04:00.0: setting latency timer to 64
code....
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedFound this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies View RelatedI have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.
View 2 Replies View RelatedI can't seem to get my adapter to work on my Debian Squeeze system. I have the wpc54g linksys notebook adapter and disk... but the disk will not autorun...I have gotten as far as to the adapter being activated, shows connection 97%, but I can't surf!
View 6 Replies View RelatedI want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View Relatedhow to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies View RelatedI have installed squeeze and kernel 2.6.32-3 Also I use the USB webcam Asus. A week ago I installed lenny, my webcam didn't work, then I made upgrade to squeeze and my webcam worked! I don't know why Yesterday I have installed the system again, the base system as lenny (net-install) and then squeeze. But webcam doesn't work
[Code]...
I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
i insalled Squeeze recently but i dont have aby sound in my system, in preference>sound> my speaker volum is up too
and alsa-pase also installed ,
what i could install or check for having sound ?
Recently I installed Debian Squeeze - 2.6.32-5-686 but I found problem with my TV OUT again. Before I had the same problem but I found decision here with this patch and everything was OK. Now I have the same problem with new NVIDIA driver (275.09.07) and Debian Squeeze. I tried older drivers but nothing. My video card i NVIDIA - 9500GT.
View 2 Replies View RelatedAfter unsuccessfully trying to install some updates on my debian squeeze system, I can no longer login to gnome when I restart the system. I've tried logging in both as root and as user and have typed in 'startx' or 'gnome-session' at the prompt but I get an error message "**(gnome-session:12020): WARNING **: Cannot open display:". I've searched the web for solutions but nothing works. I've had my debian squeeze for over three years now with no issues.
View 14 Replies View RelatedI blacklisted the pcspkr module on my system(rebooted and confirmed it no longer loads). The majority of annoying beeps are now gone. I have 2 instances where it still beeps though. Whenever GNOME first starts(before I login though) and if i am in GNOME at a terminal and type reboot. Any thoughts on disabling this?
View 11 Replies View Related
