trying to get wireless usb's to work with a fresh install of Squeeze and I'm having no luck!one is the rt28070 (Linksys) and the other one is a D-Link DWL-132 I'm at my wits end; trying to get this working for a friend and its driving me bananas!!
View 11 RepliesI just got done installing Debian Squeeze on a system..Everything seems to work where audio is concerned, except for audacious.I can get streaming music from vlc/totem as well as play music files (mp3, ogg, flac, ect.).I was wondering if anyone else experiences this problem..It should be noted that I have the Debian multimedia repository enabled as well.When running audacious from terminal and trying to open up an mp3 file I get this message:"madplug: open_audio failed: XMMS reverse compatibility output plugin."
View 5 Replies View RelatedEvery where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
so I just installed Squeeze Alpha1 amd64, dual boot with MS Vista using Grub. Everything seemed fine, but I'm apparently missing about 40GB of space. It should be set up as so:
101GB NTFS /dev/sda1 - Vista
12GB NTFS /dev/sda2 - HP Recovery
45GB ext3 /dev/sda3 - / Debian squeeze
[code]...
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View Relatedi just installed debian after about 2 weeks of using ubuntu afterriend suggested switching, and it's not detecting my wireless card in the network settings. i'm new at linux so try to keep it simple if you can please,i read the sticky about this and here's the info it said i should provide
ispci -knn Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Kernel driver in use: agpgart-intel
[code]...
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
I've just setup a fresh installation of Debian Squeeze and am trying to configure the firewall. I ran a search for iptables and got the following results:
debserv:~# find / -name iptables
/etc/bash_completion.d/iptables
/sbin/iptables
/usr/share/doc/iptables
[Code]....
When I run an iptables command to add a rule and reboot the new configuration is lost even after I have run the iptables-save command. I can't work out where the iptables config file is/should be stored so I could try editing the file with vi.
So apparently RAID configurations on desktops are pretty much worthless using the motherboard�s internal hardware and BIOS settings. How reliable is the Ubuntu SoftwareRAID? I have 3 HDD�s one that I install Ubuntu on and the other two are in a RAID 1 setup strictly for data backup. Will SoftwareRAID be able to pick up where it left off if for some reason I need to do a fresh install of Ubuntu or will I risk losing the data on the RAID 1 drives? I wasn�t sure about this since SoftwareRAID is obviously software driven and not hardware driven.
View 9 Replies View RelatedI trying to dual boot Ubuntu/Windows 7 on my computer. Here is my problem:
Info:
I used Wubi and ubuntu-11.04-desktop-amd64.iso.
Main OS: Windows 7 Pro 64bit
Videocard: Nvidia GT 240
Problems (underlined) as they occured:
1) Installed Ubuntu within Windows, rebooted, saw Ubuntu loading screen (with dots) and then I get graphics corruption (it's really bad I can't recognize anything in the screen).
Then I booted in recovery/failsafe graphic mode and I let the installation finish, then automatically rebooted.
2) Let it boot without pressing anything and instead of graphic corruption it boots in terminal.
Tried startx command but it says something relative to "x not found". Then I found out I had to install proprietary Nvidia drivers so I:
3) Booted again in failsafe graphic mode (in recovery mode) and tried to install it but... no internet connection.
I tried "sudo ifconfig eth0 up" and I got: eth0: ERROR while getting interface flags: No such device
NOTE: If I let it boot itself (terminal) I HAVE internet connection (found out with wget and ping commands).
Newbie here, but I'll attempt to display all the information requested in lwfinger's sticky:
/sbin/lspci yields:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]...
I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.
ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -
[Code]...
So i just intstalled ubutnu for the first time and the internet doesnt seem to be working, i am able to go on some majour websites such as google and gmail but others i am unable to visit.
I tried creating a blacklist-ipv6.conf file in the appropirate location
and i have even tried turining off ipv6 i forfox about config by chagning the value o true
but without any luck.
btw i tried pinging google and it works
my computer is connected to a t homehub and these are some screenshots i thought you might find useful.
I just installed a fresh Ubuntu over a Vista install on a Compaq 6720s with Wubi.But the wireless doesn't work in Ubuntu. In Vista everything is still fine.I tried two tips from the help program in Ubuntu, but to no avail. I also tried reseting and restarting. Tried the manual swith on the laptop.
View 2 Replies View RelatedI just got my self a netbook. I bought the one with linux because I figured that if they sell it with linux, it's probably using h/w which supports linux. I played around with the Mi variant it had pre-installed, but it was a bit limited and slow, so I installed UNR instead.The install went fine, and UNR is really nice to use and feels faster than the Mi too which is great. However, wireless isn't working. It's got a broadcom chipset (BCM4312) which I think needs a proprietary driver, but when I use the Hardware drivers tool, it doesn't have any options to install a driver.
View 2 Replies View RelatedI decided to do a fresh install of 10.04LTS on a Dell Latitude D600 Laptopne wordDisaster I have no wireless or WIRED internet connection. After viewing another post I've provided the output of "sudo lshw -C network" command below (I've blocked out my MAC address on purpose). It appears that the lan card is not even being recognized. The card is enabled in bios (I've checked twice). I don't get it, the wireless worked fine before I did a fresh install of 10.04LTS. I can't use wireless because I have the b43 driver firmware issue that I can't resolve unless I get my wired connection working.
*-network
description: Network controller
product: BCM4309 802.11a/b/g
[code]...
I just installed 9.10 to a dell inspiron 531s and neither the ethernet nor the wireless will find a signal. The results of sudo lshw -c network are
*-network
product: BCM4318 [AirForce One 54g] 802.11g wireless LAN controller
vendor: Broadcom Corporation
[code]...
I've had so many issues with 11.04 Natty that could not be solved I just fresh installed Ubuntu 10.04 from a USB as my netbook does not have a CD drive. Well, after installing and restarting I have no wireless. I ran iwconfig and I got pan0 no wireless extensions. How do I fix this?lspci says
ken@ken-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics
[code]...
I have successful installed debian squeeze 32bit on my pc. I like very much The vlc i have installed via software but After install vlc don't start don't appear don't do nothing any one know there is a problem with Vlc On squeeze?
View 10 Replies View RelatedI just installed Fedora 13 on a new computer and the timed login for gnome does not work unless you manually select it. This surprised me as I upgraded a separate computer to Fedora 13 and the timed login feature still correctly functions and does not require user interaction.
Code:
[daemon]
TimedLoginEnable=true
TimedLogin=<username>
TimedLoginDelay=3
Adding the above to /etc/gdm/custom.conf only adds an Automatic Login option that you have to manually select and then the computer will login. I would deem this less than useful.
Code:
[daemon]
AutomaticLoginEnable=true
AutomaticLogin=<username>
I know you can substitute the timed login with the automatic login and it will instantly login, but this provides no option to select another user. I have been unable to find any information why this feature no longer works and wanted to know if there is a new way or if anyone knows why the timed login feature was crippled.
Since upgrading my laptop to Squeeze, terminals (tested Gnome terminal and xterm) show simply a "$" prompt; machine, path and username are missing. What's really annoying though is that tab completion doesn't work, it inserts a tab character instead. Fooling around showed me that typing in the command "bash" brings everything back to what I'm used to. So in my dire newbiness do I ask, how do I reenable bash as the default shell for these programs?
View 5 Replies View RelatedDoes this latest nVidia driver (version 260.19.12) work with the default Linux kernel in Debian Squeeze? And does it require any additional packages before installation?
(I cannot test it myself, since it's my brother who recently bought a new nVidia card)
I use a net install CD to install the Debian 6.0.1(squeeze). After installation of gnome, I use apt install the mplayer. But when I use the mplayer open a avi file, it failed. The mplayer don't crash but give the following instruction:
Mplayer interrupted by signal 6 in module: filter_video
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you thin it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. [This binary of MPlayer in Debian is currently compiled with '--enable-debug'; the debugging symbols are in the package 'mplayer-dbg'.] I don't know why this happen, because all the package is installed with apt.
I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.
If memory serves the card is identified by lspci as Atheros AR5007.
There is no reference to wlan0 in etc/network/interfaces.
I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...
I have this PC that came with W7 installed..i am removing it to install Debian Squeeze.I already have burned the 8 DVDs plus the Squeeze Kde CD.AFAIK, BCM 4312 is a proprietary driver, not shipped with Squeeze, but present as source in Unstable..I have already downloaded the files also... will the built *.deb be enough to enable my wireless, or to i still have to do it by hand. remove confilicting modules, build the module, insert it, put it in the corresponding filder. does the deb install do all that, or do i still have to do it, "the good 'ol way"?
View 4 Replies View RelatedAfter using testing (now Wheezy) for almost a year and breaking my machine (latest nvidia broken packages), I went back to vanilla Squeeze (after updates, now at 6.02).Nothing from outside the stable repos; not even the nvidia driver (kept it at default and nouveau)Repo "deb http://www.debian-multimedia.org stable main non-free" enabled.It seems flash is not working with iceweasel; I either have a message which says "Cannot play media: you do not have the correct version of the flash player. Download the correct version," with a link to Adobe's site, of media appears in broken pieces.In order to keep my system "clean," I haven't downloaded anything from Adobe, and a search on this forum suggested installing flashplugin-nonfree or flashplayer-mozilla. Did both (can't have them at the same time), restarted, no joy.
~$ apt-cache policy flashplayer-mozilla
flashplayer-mozilla:
Installed: 2:10.3.181.26-0.1
[code]...
Is Squeeze incompatible with a PS/2 wheelmouse?
View 7 Replies View RelatedPreviously (on Lenny) I would boot my computer and it would happily boot through to the Gnome login page (the pretty graphical one). Now (on Squeeze) I get the plain old text login prompt. So I login normally and try running "startx". It comes up with a black screen and a mouse pointer. Nothing else. Ctrl+shift commands seem to work so I am able to get to another terminal. When I switch back to the first terminal there are just come Gnome startup messages.
I really need to have this working in order to do some "work". give me a sure fire way of either fixing this, even if it means instructions on re-installing Gnome? Normally I could copy log files from my Linux machine to my email computer but with no desktop I find this too difficult and really don't have the time to spend working out how to do it. (I have "work" to do as well). So, just briefly I will summarise the Xorg.0.log file:
[Code]....
Using coolbits allows for me to try to change it but it refuses to accept it, and even when i run it as root it still just acts like nothing has changed. It's not my laptop maker since i can overclock my gpu using rivatuner on windows so it's clearly not them trying to restrict me. I was attempting to restore teh clocks back to what the factory settings were from nvidia and not the underclocked settings that the oem put on it for the 3d settings and then reducing the 2d by ~10% to help it run cooler except when gaming.Has anyone been able to successfully use coolbits in squeeze? Or is there another nvidia overclockign tool out there besides nvclock since my gpu is apparently too new to work with it and i'm not going to risk it.
View 2 Replies View RelatedI want install ati 5470 driver on debian squeeze .But i can't !I use this instruction : http://www.debianadmin.com/how-to-insta ... ebian.html When i enter below command , show an error(cp: cannot stat `/home/alireza/fglrx-install.rw8UHP/x710/*': No such file or directory
Package build failed! or otherthing.) :# sh ati-driver-installer-8-12-x86.x86_64.run --buildpkg Debian/testing
error:
alireza@alireza-debian:~$ sudo sh ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
[code]....