Debian Multimedia :: Multimedia Crashes On Squeeze ?
May 13, 2011
I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
View 3 Replies
ADVERTISEMENT
Jul 24, 2010
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 3 Replies
View Related
May 19, 2010
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 1 Replies
View Related
Jun 23, 2011
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
View 1 Replies
View Related
Mar 28, 2016
I am new to debian. I run debian on a laptop with nvidia geforce chip 740 m (optimus), it has been working great until today when i turned it on , the start screen did not show up and it went straight to terminal mode. Starting the kdm service manually does not do anything.
View 6 Replies
View Related
Apr 23, 2010
KDM starts up fine, graphics drivers (fglrx) are loaded correctly, but as soon as I login over KDM and KDE desktop starts loading, X crashes, restarts KDM, and I get sent back to the login screen.I am running a stock debian/lenny install (with 2.6.26-686 kernel) and no error messages in my Xorg.0.log.
View 1 Replies
View Related
May 22, 2010
when I mount DVD-ROM to some files from xterm, the systerm never responsed! I used this command: sudo mount -t iso9660 /dev/cdrom /mnt/cd I search some info from google ,some guys say these info may help ,but I don't understand why it cab be crashed when I mount the CD from DVD-ROM.
/etc/fstab
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
lrwxrwxrwx 1 root root 3 05-22 19:54 /dev/dvd -> sr
dmesg |grep hd
[ 9.126848] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS.
View 10 Replies
View Related
Dec 21, 2010
i insalled Squeeze recently but i dont have aby sound in my system, in preference>sound> my speaker volum is up too
and alsa-pase also installed ,
what i could install or check for having sound ?
View 14 Replies
View Related
Feb 15, 2011
I have successful installed debian squeeze 32bit on my pc. I like very much The vlc i have installed via software but After install vlc don't start don't appear don't do nothing any one know there is a problem with Vlc On squeeze?
View 10 Replies
View Related
Jul 10, 2011
Recently I installed Debian Squeeze - 2.6.32-5-686 but I found problem with my TV OUT again. Before I had the same problem but I found decision here with this patch and everything was OK. Now I have the same problem with new NVIDIA driver (275.09.07) and Debian Squeeze. I tried older drivers but nothing. My video card i NVIDIA - 9500GT.
View 2 Replies
View Related
Aug 18, 2011
Below is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
View 6 Replies
View Related
May 11, 2011
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies
View Related
Jun 14, 2011
Found this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies
View Related
Aug 22, 2011
I have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
View 5 Replies
View Related
Jun 22, 2015
I was using Debian (jessie) testing for quit a while now, and since jessie is now the new Stable I wanted to update to testing again.
And I have an issue now, and I can't tell if it is a really a bug, or some new packages are interfering with my configuration files. Well to be honest I have more than one issue, but I am guessing that at least a few of them are related to the same issue.
Whenever I startup my Debian(testing) system, I get the gdm3 login prompt, I type in my password and hit Enter. Than there is a: “Oh no, something went wrong”-window for an blink of an eye (1-2 seconds).
After that gnome starts (almost*) normal .[gnome version 3.16.2]
*But: the gnome-sound applet doesn't start correctly. Alsamixer is running but Pulseaudio seems not to. When I start Pulseaudio manually after that everything with the sound is fine.
The most annoying thing is, that none of my Shortcuts work anymore ( Ctrl+Alt+T for terminal, Ctrl+<anything; Fn+<anything> screen brightness for example; hardware Volume Up/Down keys [Thinkpad x230t])
I checked my costume Shortcuts, Ctrl+Alt+T is set in the keyboard settings.
I have two monitors connected (its a laptop so it the build in and an external). I tried to disconnect the 2nd monitor and restartet the problem persists . Everything else seems to work fine (at least I haven't found any other issue yet). I would be glad to add some Log files, but I don't know exactly which one I should attach.
I attached the Xorg-log since it seems to me that something went wrong there:
115.284] (WW) Falling back to old probe method for vesa
[ 115.284] (EE) intel(0): [drm] failed to set drm interface version.
[ 115.284] (EE) intel(0): Failed to become DRM master.
[ 115.284] (II) UnloadModule: "intel"
[ 115.284] (EE) Screen(s) found, but none have a usable configuration.
[Code] .....
View 2 Replies
View Related
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
View 8 Replies
View Related
Sep 30, 2015
I'm running Wheezy and just did an apt-get upgrade which installed linux-3.2.0-4-amd64, a bunch of php5 stuff and some qemu stuff. Now when I log into the desktop it starts loading and before it finishes I wind up with a screen full of text. The first line is usually "BUG: unable to handle kernel paging request at <some address that varies>" but sometimes the first line is off the screen. None of KDE, Gnome or xfce work. Recovery mode to a shell prompt works fine. I did a net install of Wheezy on another disk and that runs just fine. I'd like to get my original disk working.
View 14 Replies
View Related
Apr 16, 2016
My supposedly stable system was crashing. The problem was one or more specific screensavers--xscreensaver, the display manager (lightDM), and X itself are innocent as far as I can tell.
I'm on a Thinkpad T400 with Debian Jessie (8.4)/MATE/lightDM. I have libreboot and not proprietary BIOS. I like variety, so in addition to installing xscreensaver itself (the unofficial patched jessie version without the "out of date" nag, which I got from https://angband.pl/debian/pool/main/x/xscreensaver/), I also installed some extras from the official repository (xscreensaver-gl-extra, xscreensaver-data-extra, xscreensaver-screensaver-bsod). I enabled all the installed screensavers and asked xscreensaver to randomly cycle through them.
To my dismay, after variable lengths of time (usually within 20-60 minutes), when a random screensaver has been on for a little while (I'm guessing as it's about to go to the next random one), X crashes to a black screen. The only way to make the black screen go away is to kill X (which I mapped to Control + Alt + Backspace) then log back in. There are no useful logs anywhere except some cryptic IO error 11 entry in ~/.xsessionerros.
Now for the troubleshooting:
1) First I tried installing a more up-to-date version of xscreensaver (5.34-2), which I grabbed from the sid repository. This didn't work--same problem as described above. Therefore, I went back to the patched version for jessie (5.30-1 from angband.pl).
2) To exclude that the lightDM middleman was the problem, I disabled it and was logging in with startx. Problem did not go away. (I then rigged systemd to log me in automatically and for startx to run automatically once I'm logged in--who needs middlemen?)
3) To exclude screensavers butting heads, I uninstalled mate-screensaver and disabled anything from X that could be interfering (by running these commands in a startup script: xset -dpms; xset s 0 0; xset s noblank; xset s off). Problem did not go away. I kept this startup script nevertheless.
4) Finally, to exclude individual xscreensaver module(s) being the problem, I unchecked them all. Then I wrote down the names of my 20 favorite modules (which include some from gl-extra, some from data-extra, and bsod) and tested them in small batches, running xscreensaver with only 5 favorites checked at a time. After testing four batches of 5 and witnessing all 20 favorites both display and load without any X crashes, I went ahead and selected all 20 favorites. I left the laptop on overnight and in the morning (about 12 hours later) it's still going strong.
One or more particular xscreensaver modules are crashing X, probably at the time they are being loaded to be the next one to show. I think I already spent enough time on this, so don't really care to identify +/- troubleshoot the offending modules.
View 0 Replies
View Related
Nov 9, 2010
Recently pcmanfm crashes more frequently then before. Each time it occurs, I cannot open another instance of it until I reboot my desktop/laptop. But this is not possible if I happen to be doing some long computational work. I have been using it with fluxbox for two years already, and previously I simply reopen another new window and get on with my work.
View 1 Replies
View Related
Feb 25, 2011
I installed Squeeze on an eeepc 900.Everything seems to work well, except for one thing: iceweasel, when drawing certain windows, likes to crash the entire KDE session. This is 100% replicable simply by right-clicking on a bookmark put on the bookmarks menu toolbar, and trying to go to "properites" on that item. It only does this, however, on my wife's eeepc 900, it does not happen on my 900A (different gpu and cpu though...). the two systems have the same packages installed.
The most frustrating thing is that there is no error output whatsoever. I have looked through all the logs in /var/log, and I couldn't find anything. I have run iceweasel from the command line and redirected its output to a file, but the whole system hard-locked, and when I rebooted, there was no log file. I have started X using "startx" instead of using kdm, and I cannot see any output to the VT that kicked it off because the system hard-locks.
As far as I can see, it only happens in iceweasel. If I disable compositing, it becomes stable again -- but I don't want to have to do this, as it interferes with features she is accustomed to.Oh yes, I should also add that this netbook worked fine under eeebuntu and compiz -- never an issue.
View 8 Replies
View Related
Jul 28, 2015
After unsuccessfully trying to install some updates on my debian squeeze system, I can no longer login to gnome when I restart the system. I've tried logging in both as root and as user and have typed in 'startx' or 'gnome-session' at the prompt but I get an error message "**(gnome-session:12020): WARNING **: Cannot open display:". I've searched the web for solutions but nothing works. I've had my debian squeeze for over three years now with no issues.
View 14 Replies
View Related
Feb 20, 2010
I blacklisted the pcspkr module on my system(rebooted and confirmed it no longer loads). The majority of annoying beeps are now gone. I have 2 instances where it still beeps though. Whenever GNOME first starts(before I login though) and if i am in GNOME at a terminal and type reboot. Any thoughts on disabling this?
View 11 Replies
View Related
Mar 1, 2010
On a fresh install of squeeze, I can't log in to an AIM account with being immediately disconnected and given this error: You have been connecting and disconnecting too frequently. Wait ten minutes and try again. If you continue to try, you will need to wait even longer.
I waited for several hours before trying to reconnect, but got the same message. Searching for the error led me to some bug reports from upwards of three years ago.
Strangely, this error hasn't occurred on any of my other squeeze systems.
I can ping login.oscar.aol.com as well as login.messaging.aol.com; both resolve to 205.188.251.43 for me. I tried changing the "Server" under "Advanced" to this address, but again I got the same error.
View 8 Replies
View Related
Mar 18, 2010
I'm a Linux User since 2007. Later, i was an Ubuntu Fanatic User. But my computer is old, and Ubuntu is more slow in every version.
I'm from Valencian Contry, and I speak "Valencian" or "Catalan"
How I install XMMS on Debian Squeeze???
View 14 Replies
View Related
Mar 25, 2010
I think i came across a bug in X server in squeeze. I would report it to the bug tracking system in debian packages but the think is I am not entierly sure about it.When i start X (whether it is through startx or service gdm start or auto startup through init when the pc boots) the computer PC seems to lock up.The screen goes black right after X initializes and before anything is show in the screen and if i wait a about 10 minutes the monitor either goes in standby or out of range. PC seems unresponsive to both keyboard commands and mouse but my LCD screen in my G15shows the time skips 1 sec every 2 sec (from 19:22:22 goes straight to 19:22:24).
I have a custom 2.6.33 kernel which i build but it happens with both 2.6.32-trunk and 2.6.32-3 offical kernels from the squeeze repository so i dont think that this is the problem.My PC is a P4 3.75Ghz with 2Gb RAM and an NVidia 6800GT with the binary drivers from nvidia. I have tried diffrent versions from my grapgics drivers (NVIDIA-Linux-x86-173.14.25-pkg1.run & NVIDIA-Linux-x86-195.36.15-pkg1.run) with no change in the behaviouThis is the syslog from the time my pc started and then "stuck". I left it for some time before i hard reset it
View 14 Replies
View Related
Apr 29, 2010
I've tried a few threads about install flash and haven't found the correct one.What is the correct way to install Flash on Debian Squeeze 64bit?
View 14 Replies
View Related
May 16, 2010
Tried to install aMSN using Sid package... can't do it because no TK8.5. Installed TK8.5 and aMSN, now I get another strange message ...
Error in startup script:
OK ...
Let's check out 'Empathy IM Client' , no longer any support for MSN because ...?
Tried to setup Mercury which needs Java. Go to run Mercury, no java!
Had to set up Pidgin so that I could go on msn!
View 3 Replies
View Related
May 17, 2010
I recently did a fresh Debian Squeeze install.The problem I have is that I cannot play any video. I tried opening mpg, flv and mov files with totem and vlc and they crash instantly.I think I have installed the packages (codecs, players, etc) required for playing videos.
View 13 Replies
View Related
May 21, 2010
I have just installed Squeeze and my xfce works, but I don't get a panel, unless I start it manually withxfce4-panel &As this worked,ded it to the automatically started applications. I logged-out and then back in but no panel. I did a ps -ef | grep -i paneland the panel doesn't appear to be running.
View 4 Replies
View Related
May 24, 2010
I have AWN installed on Squeeze (AMD64 bit). Many of the applets for it show as a white line so I have run it from a terminal to catch any error messages and get these:
If I then add one of the failing applets that show as a white line it says:
View 3 Replies
View Related
