Debian Multimedia :: Unable To Start Second X Server
Nov 9, 2015
I was able to start multiple X servers before. Now after the upgrade to rootless X, I had to add myself to the "input" group to be able to start X, but I'm unable to start 2nd X on a different vt.
Here are the errors and warnings I'm seeing:
Code: Select all[114940.404] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[114940.409] (WW) Falling back to old probe method for modesetting
[114940.409] (WW) Falling back to old probe method for vesa
[114940.409] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[114940.409] (EE) Screen 0 deleted because of no matching config section.
[114940.409] (EE)
[114940.409] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
I'm on Debian stretch/sid.
View 3 Replies
ADVERTISEMENT
Dec 30, 2015
I have been using bumblebee on my Optimus Laptop for a long time.I think I have this problem since the last Xorg upgrade, some months ago. The upgrade notes warned that Xorg now runs on userspace, and that configuration files are now read from the user (although I haven't noticed that).Then optirun ceased to work. As I'm using sid, I'm used to things being broken sometimes, so I simply let it go waiting for an upgrade that would fix it. Since this upgrade (either to Xorg or to bumblebee) is not coming, I have searched on the Internet, and I'm surprised that many people have had problems with bumblebee, but no one seems to be having the same exact error (see below).
I have tried everything (everything my limited knowledge and my internet searches allow me). I have tried with nvidia and nouveau drivers, but I get more or less the same result.
Code: Select all$ sudo systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/lib/systemd/system/bumblebeed.service; enabled; vendor preset: enabled)
Active: active (running) since mié 2015-12-30 09:30:34 CET; 20min ago
[code]....
It seems Xorg is failing but is not giving any information about the failure, no message, which is different to the problems I have found in the Web.
I have purged bumblebee packages to assure I'm using default configuration files. I have added rcutree.rcu_idle_gp_delay=1 to GRUB_ CMDLINE_ LINUX_ DEFAULT as instructed on some howtos.
View 2 Replies
View Related
Jan 23, 2010
I did a distribution upgrade using "apt-get dist-upgrade". After rebooting, I receive a message saying "Failed to start the X Server". When I okay the prompt for more info, I see the following: GDM: Xserer not found: /usr/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 Error: Command could not be executed! install the X server or correct GDM configuration and restart GDM.gdm[4678]: WARNING: gdm_server_spawn: Xserver not found: /usr/binX :0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
View 9 Replies
View Related
Feb 12, 2015
I have headless debian as a server which i use over tightvnc server running on it. Vnc works fine but I can't for example run sudo mousepad or any other gui app from terminal, it says something about not having the rights to open it as root. I understand this has something to do with security, but my computers are behind nat so the vnc server can only be connected inside my lan so i don't mind.
View 7 Replies
View Related
May 4, 2015
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
View 14 Replies
View Related
Mar 1, 2010
i use kde 4.4when i try to start amarok (2.2.90) i get:
amarok: symbol lookup error: /usr/lib64/libamaroklib.so.1: undefined symbol: _ZN6Plasma7WebView10itemChangeEN13QGraphicsItem18GraphicsItemChangeERK8QVariant
View 5 Replies
View Related
Sep 23, 2009
I am trying to start FTp service both from Terminal and Cpanel interface but unable to start. it says cannot start ftpd service. contact administartor
It's Redhat Linux can anybody help me to fix this issue?
View 5 Replies
View Related
May 25, 2011
Here is my Linux versionScientific Linux release 6.0 (Carbon)I don't know why it can't be started
View 14 Replies
View Related
Oct 19, 2010
# startx
xauth: creating new authority file /root/.serverauth.18174
X Window System Version 7.1.1
Release Date: 12 May 2006
[Code]....
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. Couldnt get a file descriptor referring to the console
i have used these commands also
mknod /dev/tty0 c 4 0
chmod 660 /dev/tty0
View 2 Replies
View Related
Apr 9, 2010
When i issue the command "service sendmail start", it just shows me "starting sendmail..." and waits forever. please have some point on it.
View 4 Replies
View Related
Jun 10, 2009
using centos 5.2
unbale to start ldap server.
see below info
[root@system ~]# yum install openldap
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base:
[Code]....
View 5 Replies
View Related
Apr 4, 2016
I'm running Debian 8.4 on a Lenovo W500 laptop and I recently upgraded from kernel version 3.2.0-4 to 3.16.0-4. Since then I encounter issues with lightdm (I suppose) which manifest themselves in two different scenarios:
1) scenario 1: lightdm fails to start.Instead of showing the graphical login screen, the system boots into terminal. Lightdm seems to be running, but I can't enter the X-Session (Alt+Ctrl+F7 doesn't work), nor can I restart the lightdm via
Code: Select all# service lightdm stop
# service lightdm start
dmesg shows the following (I've only pasted the end of dmesg):
Code: Select all[ 240.100071] INFO: task kworker/0:2:39 blocked for more than 120 seconds.
[ 240.106512] Not tainted 3.16.0-4-amd64 #1
[ 240.112956] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.119494] kworker/0:2 D ffff880155155a48 0 39 2 0x00000000
[code].....
and /var/log/lightdm/lightdm.log shows errors of type
Code: Select allGtk-CRITICAL: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed
when I then try to shutdown via
Code: Select all# shutdown -h now
the OS gets stuck on a message of the form
Code: Select allirq 17: nobody cared
and eventually I have to force a shutdown by holding the poweroff button.scenario 2: lightdm starts, but can't be stopped/In this case I can login and use the system as usual, but when I try to shutdown either via # shutdown -h now, or via the GUI or the power button, the system gets stuck and I have to force a shutdown by holding the poweroff button.It seems that people had similar issues on other distros (see e.g.: URL... but there doesn't seem to be a good fix so far. I can for now solve the issue by downgrading the kernel to 3.2.0-4, but I was wondering if there is a permanent fix.
View 6 Replies
View Related
Aug 4, 2010
I have followed all the steps as mentioned on documentation.except automake (I am not clear as where to make automake)
I logged in as Root on a Ubuntu system
and then
Code:
cd /opt
svn checkout svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x/
cd lighttpd-1.4.x
./autogen.sh
./configure
make
make install
After this what do I need to do to be able to start the lighttpd ?After this I did not found any script /etc/init.d/lighttpd. so what more has to be done ?
View 14 Replies
View Related
Apr 29, 2011
I am very new (since yesterday) to Linux also new to web server setup. I have installed all LAMP components, including SSL as described here: [URL]. I have added LISTEN 443 Wanted to restart the apache server -> no success ! stopped it, now doesn't start at all:
Warning msg=>
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:44 no listening sockets available, shutting down . .
Failed
I tested Apache and my PHP earlier and it worked. Now after SSL and FTP installation it doesn't work anymore! Also I am wondering about my server name, it is the set IP of the web server, surly i should change that? Only used link for SSL set-up, used diff links for apache php etc (also have java JRE installed as I will need that later for my app) also have GNOME available, but prefer command line.
View 5 Replies
View Related
Dec 28, 2015
After doing Debian's apt-get dist-upgrade from Wheezy/oldstable to Jessie/stable, I decided to try Kernel v4.2.0 instead of v3.16.0-4-amd64 to be even more updated. However, X doesn't work. /var/log/Xorg.0.log showed:
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 453.305] X Protocol Version 11, Revision 0
[ 453.305] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
View 8 Replies
View Related
Apr 25, 2011
I've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
View 5 Replies
View Related
Feb 17, 2015
When I login in the kde login in screen starts, but then I hear a beep and it freezes. If I hit ctrl-alt-f2 and log in and then type startx, a blinking curser appears and nothing happens.I am trying to set up VirtualBox to run Windows 7 and I am having trouble getting some usb devices to be recognized in Windows. I tryed following the advice of this link URL...After I added the group vboxusers to my user account and restarted the computer, this problem started.
I ran the command Code: Select alldeluser jrchristophel vboxusers, and I get the response back Code: Select allyou may not remove the user from their primary group.
The other things I did that might have caused this problem was that I installed virtual guest additions for VirtualBox, and one other addition that was needed for the USB functionality with in VirtualBox. I can't remember the name of that which I installed.I have looked at some of the logs in /var/logs.
View 14 Replies
View Related
Apr 22, 2015
I am running this Debian wheezy: URL... on my BananaPro.
I installed Gnome and tried startx but command not found. I installed Xinit but then I get :
Xinit:unable to connect to x server.
View 14 Replies
View Related
Dec 29, 2010
My room mate is trying to use an old Dell he has as a print server. After much twisting his arm, I was able to convince him to go with Debian, which, I would install. I used a 5.0.4 Net Install CD I had, and included Desktop Environment (he needs a GUI), and Print Server. Basically, as usually happens when I install Debian, I am having trouble getting X to work. Heres what the errors look like after X fails:
Ring End Space: 24 wanted 32
Fatal server error: lockup
Waiting for X server to begin accepting connections giving up.
xinit: Connection reset by peer (errno 104): Unable to connect to X server
xinit: No such process (errno 3): Server error
View 5 Replies
View Related
Nov 21, 2010
I have been trying to install Squeeze from the 6.0.1a KDE CD-1 plus the Debian repos. I just cannot get X to work. I get similar bad results to those mentioned by other users having similar problems, but none of the suggested fixes works.
Basic hardware information:
Desktop PC, whole 40 GB disk used for install
Graphics card: none Video controller on motherboard: VIA Technologies S3 UniChrome VGA controller (about 8 years old)
Monitor: Samsung Syncmaster 1280 x 1024 (about 8 years old)
Some things I've already tried: in rescue mode, as root, in /etc/X11X -configuremove file to /etc/X11/xorg.conf basically everything mentioned in threads in past two months regarding users who cannot get X to work reinstalling 100x with every choice for the installer I can think of
What happens: when doing the install, contrary to expectation, I am never prompted for any of the hardware information which the documentation at debian.org says I should have on hand (is that a good sign or a bad sign?)
No matter how I try to do the install,I always seem to get a nongraphical installation, so I try this: as root:apt-get install xorg in /etc/X11X -configthen move generated file (which looks like X didn't try to create an actual configuration file) to /etc/X11/xorg.config as non-root user:startx I get black screen (or a tiny tiny konsole at upper left) and system hangs
How can I tell whether this an X misconfiguration? How can I fix it? How can I tell whether I simply need a driver? Where do I look? How can I tell whether my hardware is simply incompatible with Squeeze? What do I need to replace? Do I need to get a new monitor in order to use Squeeze? Do I need to buy a new motherboard with newer video controller? Do I need to buy a graphics card? Which?
View 3 Replies
View Related
Jul 31, 2011
I am running Debian testing on my box and iceweasel 5 with several addons. My question is the following: is there a way to export above all my addons settings to a file? I would like to be able to install on another debian machine the same iceweasel 5 and have the same addons installed (if I could have even the same toolbar it would be dream) automatically.
View 1 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
View 8 Replies
View Related
Nov 12, 2015
So, in all distributions that I test, I did not get working the Plymouth, if I try to fix, the system broke. Only me rest open the System with recovery mode and execute "chroot" and remove the changes.
I was following that tutorial >> [URL] ....
And everything goes normally, with no errors, but when I reboot the system, GDM not start, leaving me with a black screen with the processes that system start. So how i cant fix that?
My hardware is >> Core 2 Duo 8400, GT 740 GDDR5 and 2 Hd of 500GB.
View 5 Replies
View Related
Jan 24, 2016
I asked the question on LQ, but since activity related to Debian there is smaller, it is here.
I can't start Openbox, using xinit or startx. I have a warning when using xinit:
Code: Select all***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:
imlib_context_free();
With the parameter:
context
being NULL. Please fix your program.
I don't have dbus, display managers, X is started on tty3 because I reduced the number of ttys. In xinitrc there is
Code: Select allexec openbox-session
I see a cursor appearing for a second, but then the screen goes back to tty.
The problem is new; I'd been using Openbox for a couple of months back then, and it was fine.
System is Unstable.
View 11 Replies
View Related
Jan 31, 2016
I am new to Debian (and Linux). I just finish to install minidlna to feed my TV with my Debian Jessie PC but I cannot make minidlna to start. I installed minidlna using synaptic. No error shown. I went to the config file to fill the parameters needed.
I started minidlna using the command line /etc/init.d/minidlna start and got the following each time :
XYZ@bureau:~$ sudo /etc/init.d/minidlna start
[sudo] password for XYZ:
[ ok ] Starting minidlna (via systemctl): minidlna.service.
XYZ@bureau:~$ cd /var/cache/minidlna
XYZ@bureau:/var/cache/minidlna$ sudo systemctl status minidlna -l
[Code] .....
View 4 Replies
View Related
Mar 29, 2016
I recently installed debian 8 stretch with xfce. Since the first time I boot, I have problem starting my X session: from lightdm I always attemped 2 or 3 times before it login (it returned me on lightdm prompt after a short splash screen).
Now it stopped working: the only way I can start xsession is running startx as root. When I try as user it starts the "splash" and return me to the tty with this error message:
Code: Select allServer terminated with error (1). Closing log file(EE)
This is my ~/.local/share/xorg/Xorg.0.log
Code: Select all[ 27.703]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 27.704] X Protocol Version 11, Revision 0
[ 27.704] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 27.704] Current Operating System: Linux debian 4.3.0-1-686-pae #1 SMP Debian 4.3.5-1 (2016-02-06) i686
[Code] .....
And this is my /etc/X11//Xsession
Code: Select all#!/bin/sh
#
# /etc/X11/Xsession
#
# global Xsession file -- used by display managers and xinit (startx)
# $Id: Xsession 967 2005-12-27 07:20:55Z dnusinow $
[Code] ....
and this the .xsession-errors:
Code: Select allXsession: X session started for lucatastrophe at Tue Mar 29 10:21:09 CEST 2016
localuser:lucatastrophe being added to access control list
openConnection: connect: No such file or directory
cannot connect to brltty at :0
dbus-update-activation-environment: setting MAIL=/var/mail/lucatastrophe
[Code] ...
I try to reconfigure Xorg but the Xorg -configure command result in another segmentation fault.
I think that the problem could be related with old configuration (when I install this version of debian I maintain the /home partition and my previous OS was debian 7 with xfce).
View 7 Replies
View Related
Jul 1, 2010
Linux noob here with a very fresh Debian 5.04 install. Not sure if this is the correct board for this but here goes;*No* programs start in X. Terminal, System Monitor, Epiphany, Gedit, Synaptic Package Manager... They all fail to start.The programs try to start for 15 seconds after which they give up. For example, if I press the Epiphany-icon in the panel I see "Starting Epiphany We..." in the lower-left corner and the mouse cursor changes to the loading animation for 15 seconds but then after that nothing happens and the "Starting Epiphany We..."-icon disappears. I have two users (plus root of course) and the same thing happens with both accounts.
I can start the icons I have on my desktop (Computer, Home folder, Trash and Downloads) and I can Lock the screen/log off/shut down but that's about it. Oh and one more thing; sometimes when I log in everything works just fine, so this whole thing seems a bit random.
View 6 Replies
View Related
Jul 5, 2010
I have recently install Blender on my system (squeeze, 2.6.32-5-amd64, ATI Radeon HD 3100) and when I try and start it I get a segmentation fault. I am using the proprietary driver. When i run glxinfo or glxgears I get a segmentation fault as well which makes me think I have an issue with my hardware acceleration.
I am really suck when it comes to trying to diagnose the problem any further and would appreciate any help you guys have. My system is up to date and Blender has worked before on an almost identical setup (i reinstall debian a while back, may have been using a slightly older kernel then).
View 3 Replies
View Related
Jul 26, 2010
I have installed ubuntu 10.04 lts -- I was wondering why it didn't start cupsd or something on boot?
I have installed the same ubuntu on another unit (same specs) with no problem on printing.... but this one (I'm swearing a lot now!) because it doesn't work... Been at this for 3 days in a span of one month -- and I started to think that this computer is hard headed GR!!
I'd like to bash it -- sorry but I'm really really annoyed -- to put it softly.
I'd like to know why it's not working as smoothly --
Currently I need to $sudo cupsd to make printing work every time I power on this computer.
View 6 Replies
View Related