Server :: Unable To Start Apache - No Listening Sockets Available
Apr 29, 2011
I am very new (since yesterday) to Linux also new to web server setup. I have installed all LAMP components, including SSL as described here: [URL]. I have added LISTEN 443 Wanted to restart the apache server -> no success ! stopped it, now doesn't start at all:
Warning msg=>
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:44 no listening sockets available, shutting down . .
Failed
I tested Apache and my PHP earlier and it worked. Now after SSL and FTP installation it doesn't work anymore! Also I am wondering about my server name, it is the set IP of the web server, surly i should change that? Only used link for SSL set-up, used diff links for apache php etc (also have java JRE installed as I will need that later for my app) also have GNOME available, but prefer command line.
View 5 Replies
ADVERTISEMENT
May 23, 2011
Code:
[Sun May 22 04:02:06 2011] [notice] SIGHUP received. Attempting to restart
(98) Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Above message is from /etc/httpd/logs/error_log.1. Saturday morning I reinstall my server. After finish, no error. I can access my HTTP server. Monday morning it has crashed. I don't know what is the meaning about this message.
View 2 Replies
View Related
Sep 16, 2010
I have just installed Ubuntu 10.04 and it works fine. Next, I attempted to install Apache 2.2.16 server on the machine. I was able to get Apache installed but I cant't get it to start. The command I used to get it to start is "apachectl -k start" and got the response "command not found". Then I used the absolute path which is "/home/Administrator/Downloads/apache/bin/apachectl -k start" and got the response"httpd: could not reliably determine ther server's fully qualified domain name, using 127.0.1.1 for ServerName(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80.no listening to sockets available, shutting down". Please advise me on what to do. My eyes hurt from looking at the screen for so long trying different options and reading almost all the apache install instructions that exists. Just ready to have it up and running.
View 7 Replies
View Related
Apr 2, 2011
[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd
View 9 Replies
View Related
Sep 29, 2010
root@HOST [~]# /etc/init.d/httpd start
Starting httpd: no listening sockets available, shutting down
Unable to open log [FAILED]
root@HOST [~]# /etc/init.d/httpd restart
Stopping httpd: [FAILED]
Starting httpd: no listening sockets available, shutting down
Unable to open logs [FAILED]
root@HOST [~]# tail -n 10 /var/log/messages
Sep 29 17:59:30 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv4 for mDNS.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv4 with address 196.219.240.236.
Sep 29 17:59:30 localhost avahi-daemon[2870]: Registering new address record for 196.219.240.236 on wlan0.
Sep 29 17:59:31 localhost avahi-daemon[2870]: New relevant interface wlan0.IPv6 for mDNS.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::223:cdff:fecb:9c5e.
Sep 29 17:59:31 localhost avahi-daemon[2870]: Registering new address record for fe80::223:cdff:fecb:9c5e on wlan0.
Sep 29 17:59:31 localhost NetworkManager: <info> (wlan0): device state change: 7 -> 8
Sep 29 17:59:31 localhost NetworkManager: <info> Policy set 'Sunsoft1' (wlan0) as default for routing and DNS.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) successful, device activated.
Sep 29 17:59:31 localhost NetworkManager: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
What is the problem I have a local server
CentOS Linux
View 19 Replies
View Related
Dec 2, 2010
My Apache is not listening on port 8080. Hence i cant access my server manager [URL]
View 2 Replies
View Related
Aug 28, 2010
I was logged in as root, made some changes to my users and think I may have inadvertently changed root somehow. Ever since then, my machine runs just fine, I can sudo, Yast, etc without any issues. (Root password is fine) but when I try to log in as root, the system changes the screen display, as if it's going to login, then returns me back to the login prompt without error. If I "ctl+alt+F1", I drop out to the console and can login as root, but cannot startx because the display is already in use.... So, I removed the .X0-lock, but still cannot get the GUI to load. (after running rm /tmp/./X0-lock, I get a fatal error, "can't establish any listening sockets..." "Ctl+Alt+F7" brings me back to the GUI where I am logged in as myself in Gnome) if I login with my user account, everything runs fine and all is well.
View 9 Replies
View Related
Aug 19, 2011
I had to reinstall my DMZ webserver the other day. Now I cannot figure out for the life of me figure out why Apache refuses to listen on eth1 it will only listen on eth0. I have it setup so that it listens with * I'm not specifying a particular IP for it to listen on. When I do specify it still doesn't work.
View 9 Replies
View Related
Aug 25, 2009
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies
View Related
Apr 6, 2010
My apache server don't want to start by itself on boot.
View 9 Replies
View Related
Jan 19, 2011
Been a very long time since I have played with Linux.Now in a new position and have setup a Nagios server running on Centos 5,5 for a NMS.How do I set apache that when I visit: whatever.org it starts Nagios.. Currently I have to go to whatever.org/nagios.
View 9 Replies
View Related
Nov 20, 2010
It is now almost 3 'o clock in the night here, last 5 hours trying to fix this problem. CentOS always runs perfectly here. I am not a genie with the terminal so wanted to install GNOME on my vps, than vnc but didn't work and did a restart.
Now got this:
Quote:[root@srv1 conf]# apachectl start
Syntax error on line 41 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration
View 1 Replies
View Related
Jun 14, 2011
I installed apache 2.2 with centos 5.5. When I typed service httpd stop, apache stopped. Then in a minute, it automatic start again. I don't use crontab, and I tried 'chkconfig httpd off', but it still automatic start. I used 'ps -ef' to look process, I saw, httpd have PPID is 1, and then I find PID 1 have PPID 0.
View 1 Replies
View Related
Mar 14, 2010
I am using windowsxp in one pc and another running on fedora 11,,, i develop socket based applications which run on fedora linux. But i need to test these applications with a software running on windows xp. i found that i could not connect to socket of the application running on fedora from an application running on windows. i am not able to identify the problem. should i try any other linux distribution?
View 4 Replies
View Related
Feb 20, 2009
I have a problem with running Apache web server. I think my problem is either I can not get httpd to load automatically or it's being blocked from external unless I'm logged in, don't know which. Or, I'm completely off base. Either way, being logged in solves the problem. Now I just need to fix it. This is a brand new server running latest apache and fedora 10 (all fully patched). Loaded from source to all default (non RPM directories - apache is /usr/local/apache2/... )
I modified the existing /etc/init.d/httpd script and had it point to the /usr/local/apache2 areas.I even did a chkconfig --add httpd and show it is on for run levels 2345.The problem is that when I reboot the server httpd does not load because I can not access the website.However, the minute I login to the server as a user (non-root) it automatically loads httpd and the website works.Then, when I logout, everything is inaccessible again. I even tried to put the commands in the /etc/rc.local script (or wherever it is).Same thing happens.I know this is a simple fix. Just don't know what it is. Is it related to SElinux? However, wouldn't SElinux create access problems regardless of being logged in or not? Once I'm logged in, everything automatically fixes itself (either it's a service load or a rights filter fix).
Remember, everything works perfectly as long as I'm logged in to the server (even as a non-root user). Just the act of logging in makes the web server accessible from to the rest of the world. However, when I logout, the web server is inaccessible.
View 5 Replies
View Related
Mar 7, 2010
I installed LAMPP a couple of weeks ago and was working fine. Today when I try to start lampp, it will only start MySql and ProFTPD. It says "XAMPP: Another web server daemon is already running." How can I find out where this other server is located and stop it?
View 2 Replies
View Related
Nov 12, 2009
I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
View 2 Replies
View Related
Jul 2, 2010
I'd like to permit to start download file when I click over some links. How can I to start download files through http protocol with apache 2?
View 5 Replies
View Related
Apr 25, 2009
I've decided to install apache server from groundzero. So I've done next things:1)downloaded source tar with apache22)unzipped it3)./configure(d) it4)make5)make install
...But!!! I can't start it. apachectl in /usr/local/apache2/bin
error answer is:
<code>
[root@dhcppc1 bin]# apachectl start
[code]...
View 6 Replies
View Related
Nov 9, 2010
I'm trying to figure out if it's possible to configure apache or any other linux http server, to allow the visiting user to start applications installed locally on the http server and get the GUI of that application displayed in a java applet (or any other similar solution). In short, I'm looking for an alternative solution to proprietary technologies such as Citrix and Microsoft Remote Access Gateway.
View 3 Replies
View Related
Nov 1, 2010
i tried my best andwrite all the commands given below. but port 27000 is not in listening state.Note: I spoofed MAC address (change MAC address)on this MAchine.here is my iptables file.
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
[code]....
View 2 Replies
View Related
Jul 2, 2010
i installed apache 2.2.15 in my system its working properly.... but i deployed some php files in /usr/local/apache2/htdocs ... i was not able to run that php files ..... if i run that php file in browser it shows content of that file... for an example i created one test.php file(it contains <?php echo "hello world" ?>) and put it in /usr/local/apache2/htdocs... if i run in browser using this [URL] its shows in browse like this <?php echo "hello world" ?>......
View 1 Replies
View Related
Aug 11, 2011
I've tried on both 10.04 and 10.10. I apt-get install apache2, and put a simple "hello world" perl script in /usr/lib/cgi-bin, but when calling the script via the webserver I get a 404 "file not found" error.
/etc/apache2/sites-available/default already contained (out of the box)
Code:
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
This used to work out of the box in the days of the older monolithic apache. What configuration has to be made to enable scripts to run?
View 1 Replies
View Related
Aug 2, 2010
I am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
View 14 Replies
View Related
Apr 25, 2011
I have a nagios server monitoring around a 1000 hosts in our office. To make things easier, i've integrated apache into Active Directory for the website authentication. This works perfectly, however the Nagios website uses alot of CGI scripts to display information I get the message below when trying to show CGI scripts with an AD user. Local users work fine. 403 Forbidden You don't have permission to access /nagios/cgi-bin/status.cgi on this server. I tried adding the AD users to the cgi.conf file within Nagios (which works for local accounts) but it doesn't seem to work even with this change.
View 4 Replies
View Related
Aug 27, 2010
I am struggling a little on how to best approach this problem. I have wrote a server program that runs via xinetd, that obviously spits out data at the client end. Fairly straightforward stuff?There is a point in my server code where I need to display an image/gui i.e something that runs on X11 that prompts a user to perform a task on the display connected at the the server side.So far I have written a test program that displays some text at the client end and then launches the browser at the server end. I have also set the following export. Code: export DISPLAY=:0 and then goes on to launch my web browser. Works great when ran locally on the server and when I remotely telnet in to the server and run the code.
However when I try to run the same piece of code as a xinetd service the export seems to have zero affect and the client terminal window displays errors associated with there not being a X11 server running.The code launches fine when I create a socket to serverip:6556 it just the ability to display gui programs to another display that does not seem to be working.
View 5 Replies
View Related
Oct 20, 2009
I suspect that this has come up numerous times, but I am new to Linux and I am setting up a new in-house server using Ubuntu 9.04 and Apache, etc. I can see the welcoming "It Works!" message when I log in via Firefox. I can see "index.html" when I FTP the server with the site name and password at /var/www. I can also see the -rw-r-r-- attributes, but I can't edit the HTML file or replace it. When I try to rename the "index.html" file.
I get the following message: "Request denied. Verify that the file or folder exists and that you have the necessary permissions on the server to perform the requested operation."
I haven't been able to determine where to enter the password or what changes I need to make to be able to work with the /var/www directory via FTP.
View 4 Replies
View Related
Jan 29, 2011
I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies
View Related
Jun 9, 2010
I have a problem creating my second socket in client file. the program was running well but when I try to add another socket to connect to the same server, I got a problem connecting to the first socket! it doesn't make sense. the original code was:
sockfd[i] = socket(AF_INET, SOCK_STREAM, 0);
if(sockfd[i] < 0) error("(MAIN) - Error openning socket 1");
port_num[i] = portno;
bzero((char*) &serv_addr[i], sizeof(serv_addr[i]));
[Code].....
View 1 Replies
View Related
Aug 2, 2010
I tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
View 2 Replies
View Related
