Debian Multimedia :: Install - Minidlna Does Not Start
Jan 31, 2016
I am new to Debian (and Linux). I just finish to install minidlna to feed my TV with my Debian Jessie PC but I cannot make minidlna to start. I installed minidlna using synaptic. No error shown. I went to the config file to fill the parameters needed.
I started minidlna using the command line /etc/init.d/minidlna start and got the following each time :
XYZ@bureau:~$ sudo /etc/init.d/minidlna start
[sudo] password for XYZ:
[ ok ] Starting minidlna (via systemctl): minidlna.service.
XYZ@bureau:~$ cd /var/cache/minidlna
XYZ@bureau:/var/cache/minidlna$ sudo systemctl status minidlna -l
[Code] .....
View 4 Replies
ADVERTISEMENT
Jan 17, 2015
I am trying to setup a media server running Debian 7.8 and the minidlna 1.0.24. My TV is a Toshiba 50L7300UC and can play music and show images via the DLNA. It will play .mkv videos too, but when I try to play an .mp4 video it says "Unsupported file". If I put the same .mp4 video onto a USB and plug that into the TV, the TV plays it no problem.
When testing streaming to my phone, everything works (music, pictures, MKV and MP4 videos).
How I can get the MP4 videos to stream to my TV?
View 5 Replies
View Related
Feb 24, 2015
I have minidlna installed and half the time I go to use it, the service has stopped and I have to manually restart it with "service minidlna restart". I haven't restarted the server to cause this. There is nothing in the log file in /var/log/minidlna.log
After watching a video, it stopped. If I don't look at it for a few days, it stops.
View 4 Replies
View Related
May 26, 2010
I've been using a headless ubuntu machine for a few months now to torrent stuff and serve it up to my PS3 using MiniDLNA.
Everything was working fine until this morning when i decided the list of stuff in ~/Movies/Torrents was too long. I opened up the directory on my Mac (shared over the network using avahi and netatalk so my Mac thinks it's another Mac) and made some folders for shows in there. I moved the files into them and turned on my PS3. It was a bloodbath, only one of the new folders is seen by the PS3. It still sees folders that were created by transmission.
I changed the permissions to 777 for everything (had to to move folders around) and I also gave the new folders to my transmission user and group lest that was the problem (it wasn't).
Below is a screenshot of $ls -l ~/Movies/Torrents I have marked the ones that show up on the PS3. Only 'Lost' was made today out of the ones it sees. [url]
It's Ubuntu 9.10.
View 1 Replies
View Related
Jul 26, 2011
I just reinstalled Ubuntu at least twice for this problem: Minidlna starts fine for a few minutes, I can see it on the network with my television, windows and even my phone. However, after a few minutes (say one hour), it stops being there. The process keeps running, and is kinda responsive to rescans and restarts. However it becomes unusable after a few minutes. The last reinstall was pretty basic: Installed Ubuntu 9.04, upgraded to 10.04 (servers), installed minidlna, wait and... bam! So there were no conflicts in all that, so what could make minidlna stop being responsive?
View 2 Replies
View Related
Nov 12, 2015
So, in all distributions that I test, I did not get working the Plymouth, if I try to fix, the system broke. Only me rest open the System with recovery mode and execute "chroot" and remove the changes.
I was following that tutorial >> [URL] ....
And everything goes normally, with no errors, but when I reboot the system, GDM not start, leaving me with a black screen with the processes that system start. So how i cant fix that?
My hardware is >> Core 2 Duo 8400, GT 740 GDDR5 and 2 Hd of 500GB.
View 5 Replies
View Related
Oct 10, 2010
I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:
[Code]....
View 3 Replies
View Related
Apr 12, 2011
My end goal for this project is to display a live internet stream through my PC on my TV by way of some DLNA client. I am currently using MiniDLNA (set up and working) as my server and I have a DirecTV receiver and an XBox 360 as options for the client. So far, I can view static videos on the client (something that is in the proper video format for the client to read), but I am having issues getting a live stream to work. My end goal for all of this is to watch MLB on my TV without having to plug a PC into my TV.
For those not familiar, there is a python project (mlbviewer) that will find the stream for me through my MLB.com account and stream that to VLC. I can then use VLC to transcode that to something that the DLNA client can read. I'm very new to DLNA and streaming video, so I'm not entirely certain what I need to do here, but I've read that the answer for the XBox is an ASX file that points to the stream. Currently, I cannot see the ASX file on the XBox (or DTV receiver) though I can see the other video files in the folder - which I think may be a MiniDLNA problem.
I have tried uShare and MediaTomb, and so far I prefer MiniDLNA (if it works) for its light weight and command line configuration.
View 1 Replies
View Related
Feb 17, 2015
When I login in the kde login in screen starts, but then I hear a beep and it freezes. If I hit ctrl-alt-f2 and log in and then type startx, a blinking curser appears and nothing happens.I am trying to set up VirtualBox to run Windows 7 and I am having trouble getting some usb devices to be recognized in Windows. I tryed following the advice of this link URL...After I added the group vboxusers to my user account and restarted the computer, this problem started.
I ran the command Code: Select alldeluser jrchristophel vboxusers, and I get the response back Code: Select allyou may not remove the user from their primary group.
The other things I did that might have caused this problem was that I installed virtual guest additions for VirtualBox, and one other addition that was needed for the USB functionality with in VirtualBox. I can't remember the name of that which I installed.I have looked at some of the logs in /var/logs.
View 14 Replies
View Related
Apr 22, 2015
I am running this Debian wheezy: URL... on my BananaPro.
I installed Gnome and tried startx but command not found. I installed Xinit but then I get :
Xinit:unable to connect to x server.
View 14 Replies
View Related
Dec 29, 2010
My room mate is trying to use an old Dell he has as a print server. After much twisting his arm, I was able to convince him to go with Debian, which, I would install. I used a 5.0.4 Net Install CD I had, and included Desktop Environment (he needs a GUI), and Print Server. Basically, as usually happens when I install Debian, I am having trouble getting X to work. Heres what the errors look like after X fails:
Ring End Space: 24 wanted 32
Fatal server error: lockup
Waiting for X server to begin accepting connections giving up.
xinit: Connection reset by peer (errno 104): Unable to connect to X server
xinit: No such process (errno 3): Server error
View 5 Replies
View Related
Nov 21, 2010
I have been trying to install Squeeze from the 6.0.1a KDE CD-1 plus the Debian repos. I just cannot get X to work. I get similar bad results to those mentioned by other users having similar problems, but none of the suggested fixes works.
Basic hardware information:
Desktop PC, whole 40 GB disk used for install
Graphics card: none Video controller on motherboard: VIA Technologies S3 UniChrome VGA controller (about 8 years old)
Monitor: Samsung Syncmaster 1280 x 1024 (about 8 years old)
Some things I've already tried: in rescue mode, as root, in /etc/X11X -configuremove file to /etc/X11/xorg.conf basically everything mentioned in threads in past two months regarding users who cannot get X to work reinstalling 100x with every choice for the installer I can think of
What happens: when doing the install, contrary to expectation, I am never prompted for any of the hardware information which the documentation at debian.org says I should have on hand (is that a good sign or a bad sign?)
No matter how I try to do the install,I always seem to get a nongraphical installation, so I try this: as root:apt-get install xorg in /etc/X11X -configthen move generated file (which looks like X didn't try to create an actual configuration file) to /etc/X11/xorg.config as non-root user:startx I get black screen (or a tiny tiny konsole at upper left) and system hangs
How can I tell whether this an X misconfiguration? How can I fix it? How can I tell whether I simply need a driver? Where do I look? How can I tell whether my hardware is simply incompatible with Squeeze? What do I need to replace? Do I need to get a new monitor in order to use Squeeze? Do I need to buy a new motherboard with newer video controller? Do I need to buy a graphics card? Which?
View 3 Replies
View Related
Oct 6, 2010
I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
View 8 Replies
View Related
Nov 9, 2015
I was able to start multiple X servers before. Now after the upgrade to rootless X, I had to add myself to the "input" group to be able to start X, but I'm unable to start 2nd X on a different vt.
Here are the errors and warnings I'm seeing:
Code: Select all[114940.404] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[114940.409] (WW) Falling back to old probe method for modesetting
[114940.409] (WW) Falling back to old probe method for vesa
[114940.409] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[114940.409] (EE) Screen 0 deleted because of no matching config section.
[114940.409] (EE)
[114940.409] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
I'm on Debian stretch/sid.
View 3 Replies
View Related
Dec 30, 2015
I have been using bumblebee on my Optimus Laptop for a long time.I think I have this problem since the last Xorg upgrade, some months ago. The upgrade notes warned that Xorg now runs on userspace, and that configuration files are now read from the user (although I haven't noticed that).Then optirun ceased to work. As I'm using sid, I'm used to things being broken sometimes, so I simply let it go waiting for an upgrade that would fix it. Since this upgrade (either to Xorg or to bumblebee) is not coming, I have searched on the Internet, and I'm surprised that many people have had problems with bumblebee, but no one seems to be having the same exact error (see below).
I have tried everything (everything my limited knowledge and my internet searches allow me). I have tried with nvidia and nouveau drivers, but I get more or less the same result.
Code: Select all$ sudo systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/lib/systemd/system/bumblebeed.service; enabled; vendor preset: enabled)
Active: active (running) since mié 2015-12-30 09:30:34 CET; 20min ago
[code]....
It seems Xorg is failing but is not giving any information about the failure, no message, which is different to the problems I have found in the Web.
I have purged bumblebee packages to assure I'm using default configuration files. I have added rcutree.rcu_idle_gp_delay=1 to GRUB_ CMDLINE_ LINUX_ DEFAULT as instructed on some howtos.
View 2 Replies
View Related
Jan 24, 2016
I asked the question on LQ, but since activity related to Debian there is smaller, it is here.
I can't start Openbox, using xinit or startx. I have a warning when using xinit:
Code: Select all***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:
imlib_context_free();
With the parameter:
context
being NULL. Please fix your program.
I don't have dbus, display managers, X is started on tty3 because I reduced the number of ttys. In xinitrc there is
Code: Select allexec openbox-session
I see a cursor appearing for a second, but then the screen goes back to tty.
The problem is new; I'd been using Openbox for a couple of months back then, and it was fine.
System is Unstable.
View 11 Replies
View Related
Mar 29, 2016
I recently installed debian 8 stretch with xfce. Since the first time I boot, I have problem starting my X session: from lightdm I always attemped 2 or 3 times before it login (it returned me on lightdm prompt after a short splash screen).
Now it stopped working: the only way I can start xsession is running startx as root. When I try as user it starts the "splash" and return me to the tty with this error message:
Code: Select allServer terminated with error (1). Closing log file(EE)
This is my ~/.local/share/xorg/Xorg.0.log
Code: Select all[ 27.703]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 27.704] X Protocol Version 11, Revision 0
[ 27.704] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 27.704] Current Operating System: Linux debian 4.3.0-1-686-pae #1 SMP Debian 4.3.5-1 (2016-02-06) i686
[Code] .....
And this is my /etc/X11//Xsession
Code: Select all#!/bin/sh
#
# /etc/X11/Xsession
#
# global Xsession file -- used by display managers and xinit (startx)
# $Id: Xsession 967 2005-12-27 07:20:55Z dnusinow $
[Code] ....
and this the .xsession-errors:
Code: Select allXsession: X session started for lucatastrophe at Tue Mar 29 10:21:09 CEST 2016
localuser:lucatastrophe being added to access control list
openConnection: connect: No such file or directory
cannot connect to brltty at :0
dbus-update-activation-environment: setting MAIL=/var/mail/lucatastrophe
[Code] ...
I try to reconfigure Xorg but the Xorg -configure command result in another segmentation fault.
I think that the problem could be related with old configuration (when I install this version of debian I maintain the /home partition and my previous OS was debian 7 with xfce).
View 7 Replies
View Related
Jul 1, 2010
Linux noob here with a very fresh Debian 5.04 install. Not sure if this is the correct board for this but here goes;*No* programs start in X. Terminal, System Monitor, Epiphany, Gedit, Synaptic Package Manager... They all fail to start.The programs try to start for 15 seconds after which they give up. For example, if I press the Epiphany-icon in the panel I see "Starting Epiphany We..." in the lower-left corner and the mouse cursor changes to the loading animation for 15 seconds but then after that nothing happens and the "Starting Epiphany We..."-icon disappears. I have two users (plus root of course) and the same thing happens with both accounts.
I can start the icons I have on my desktop (Computer, Home folder, Trash and Downloads) and I can Lock the screen/log off/shut down but that's about it. Oh and one more thing; sometimes when I log in everything works just fine, so this whole thing seems a bit random.
View 6 Replies
View Related
Jul 5, 2010
I have recently install Blender on my system (squeeze, 2.6.32-5-amd64, ATI Radeon HD 3100) and when I try and start it I get a segmentation fault. I am using the proprietary driver. When i run glxinfo or glxgears I get a segmentation fault as well which makes me think I have an issue with my hardware acceleration.
I am really suck when it comes to trying to diagnose the problem any further and would appreciate any help you guys have. My system is up to date and Blender has worked before on an almost identical setup (i reinstall debian a while back, may have been using a slightly older kernel then).
View 3 Replies
View Related
Jul 26, 2010
I have installed ubuntu 10.04 lts -- I was wondering why it didn't start cupsd or something on boot?
I have installed the same ubuntu on another unit (same specs) with no problem on printing.... but this one (I'm swearing a lot now!) because it doesn't work... Been at this for 3 days in a span of one month -- and I started to think that this computer is hard headed GR!!
I'd like to bash it -- sorry but I'm really really annoyed -- to put it softly.
I'd like to know why it's not working as smoothly --
Currently I need to $sudo cupsd to make printing work every time I power on this computer.
View 6 Replies
View Related
Aug 27, 2010
I tried to install Skype, using the Debian download from Skype, but it didn't want to play. I downloaded the Ubuntu 64-bit deb and installed it with Gdebi. I started the application from the terminal and accepted the 'User Agreement'. Skype then tried to log me on, and I got the following error and the app closed:
Inconsistency detected by ld.so: dl-open.c: 611: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
View 7 Replies
View Related
Dec 5, 2010
I use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.
View 2 Replies
View Related
Mar 5, 2011
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
View 6 Replies
View Related
Apr 9, 2011
I'm using Debian 2.6.32-5-amd64 (testing) for several years now. Initial installation was done at least two years ago, without any issues. I do keep my system up-to-date. However, a few months ago, after an apt-get update/upgrade/system-upgrade, I discovered that, if I try to launch KDE or Gnome, I only see a black screen and I actually need to restart my computer. On some cases the system even froze and needed to hardware reset, and run fsck in recovery mode after rebooting. Really very annoying... Since I don't use KDE or Gnome desktops (just a few applications depending on KDE/Gnome libraries), I didn't bother to figure out what is happening. However, others use my computer occasionally, and I would like to get KDE and Gnome working again. I purged and reinstalled everything that had to do with KDE or Gnome, even deleted KDE/Gnome files in my home directory, but the black screens are still there, everytime I try to start any of those desktops. Note that kdm or gdm don't even mention KDE or Gnome as available sessions, although all necessary packages are installed. I have no idea what to do to fix the problem.
Another question: I recently got rid of gdm because it is buggy and tried wdm instead. However, /etc/profile is not read anymore. Apparently, wdm does not use /etc/profile by default. Is there any way to change this?
View 12 Replies
View Related
Aug 24, 2011
I am trying to make a web server with debian 6 and i want a xfce dsektop when i need to open files,extract,navigate but to be able to turn it off when i dont need it (to save ressources).I already installed it with aptitude install xorg and aptitude install xfce.
View 4 Replies
View Related
Feb 25, 2015
My hp does not want to start X for some reason. I have so many errors. I made an account to just see this problem be fixed. Now when I type "startx" I get back, "bash: /usr/bin/startx no such file in directory". I have to use GRUB due to the fact I forgot my login. Although, I do remember my password.
View 7 Replies
View Related
Mar 27, 2015
I tried to install drivers for my GeForce GT 630M graphic card. At first, I just installed nvidia-detect and there was a suggestion to install nvidia-driver:
Code: Select allsudo apt-get install nvidia-detect
nvidia-detect
sudo apt-get install nvidia-driver
After reboot, there was a sad ?monitor like this one: [URL] ....
After first failure, I tried to use Debian wiki tutorial for Debian Jessie (probably I should have done this at first )
Code: Select allaptitude install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') nvidia-legacy-304xx-kernel-dkms
echo -e 'Section "Device"
Identifier "GPU Nvidia"
Driver "nvidia"
EndSection' > /etc/X11/xorg.conf.d/20-nvidia.conf
But also without success. Now I can't use X at all.
View 7 Replies
View Related
May 7, 2015
I installed jessie from a beta/rc shortly before release on my MacBook Pro 13 Retina and have kept it up to-date with apt-get dist-upgrade. Rcently gdm3/gnome-session have stopped working together. When I log in the screen goes black for a couple of seconds then goes back to the login screen. This happens with "System Default", "GNOME Classic" and "GNOME", but not with "GNOME on Wayland". However, Wayland seems to have some other issues. I haven't tried an alternative dm yet, eg lightdm, but the GNOME desktop does work when started with startx.
I've just used journalctl to get logs of what gdm3 and gnome-session were doing at the time. After booting I waited until the clock reached the next minute (19:55) so I'd know at which point in the logs I'd hit enter on my password. I'll post the gdm log separately in two chunks because the forum server doesn't seem to like text attachments and they're too long for one post.
Log from gnome-session:
Code: Select all-- Logs begin at Thu 2015-05-07 19:54:06 CEST, end at Thu 2015-05-07 19:56:41 CEST. --
May 07 19:54:08 jeanette gnome-session[885]: gnome-session[885]: WARNING: Could not parse desktop file caribou-autostart.desktop or it references a not found TryExec binary
[CODE]...
View 10 Replies
View Related
