Debian Multimedia :: GDM Not Start After Install Plymouth
Nov 12, 2015
So, in all distributions that I test, I did not get working the Plymouth, if I try to fix, the system broke. Only me rest open the System with recovery mode and execute "chroot" and remove the changes.
I was following that tutorial >> [URL] ....
And everything goes normally, with no errors, but when I reboot the system, GDM not start, leaving me with a black screen with the processes that system start. So how i cant fix that?
My hardware is >> Core 2 Duo 8400, GT 740 GDDR5 and 2 Hd of 500GB.
View 5 Replies
ADVERTISEMENT
Jun 16, 2011
I am new to linux... and I have Installed Debian as my default OS replacing Ubuntu.
I have Installed Plymouth:
# apt-get install plymouth
# /usr/sbin/plymouth-set-default-theme --list
# /usr/sbin/plymouth-set-default-theme THEME
# update-initramfs -u
Plymouth does not work. What went wrong? or what more should I do to make it work.Also how do I install themes to plymouth, which are not there in the theme package? I have come across this theme I really like but it is in tar.gz and I am looking for some guidance from the forum to run tar.gz packages.
View 5 Replies
View Related
Jan 31, 2016
I am new to Debian (and Linux). I just finish to install minidlna to feed my TV with my Debian Jessie PC but I cannot make minidlna to start. I installed minidlna using synaptic. No error shown. I went to the config file to fill the parameters needed.
I started minidlna using the command line /etc/init.d/minidlna start and got the following each time :
XYZ@bureau:~$ sudo /etc/init.d/minidlna start
[sudo] password for XYZ:
[ ok ] Starting minidlna (via systemctl): minidlna.service.
XYZ@bureau:~$ cd /var/cache/minidlna
XYZ@bureau:/var/cache/minidlna$ sudo systemctl status minidlna -l
[Code] .....
View 4 Replies
View Related
Oct 10, 2010
I just installed squeeze on a raid 1 set of partitions via netinst. gde works fine. I have installed kdm and all of its dependencies (I believe), but when I select it and log in, I see the kde startup screen for a moment, then it goes blank, and goes back to the login screen. My /var/log/kdm.log is:
[Code]....
View 3 Replies
View Related
Feb 5, 2011
Does anyone other this know how (or know of a guide that details how) to create a text based start up theme for plymouth? I have some older hardware and I'd like to do something custom up there.
View 2 Replies
View Related
Aug 3, 2011
really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
View 5 Replies
View Related
Aug 3, 2015
Code: Select all# plymouth-set-default-theme --list
details
joy
lines
spacefun
text
tribar
These are the plymouth themes available.
I've tried to preview every themes (using this script [URL[....), but they're all the same, just three dots except for "details" and "tribar". I've tried to use one of those three dots theme too and yes the bootsplash is three dots.
I've opened /usr/share/plymouth/themes/spacefun/ and saw that it shouldn't be like that. It should be something with blue background and Debian logo.
I've used this Wiki page as reference: [URL] .... I'm using Jessie.
View 1 Replies
View Related
May 15, 2010
has anyone got plymouth running properly on debian sid yet?
View 14 Replies
View Related
Jun 2, 2015
I installed (debian-jessie-DI-rc3-amd64-DVD [testing]) on both my laptop and desktop. After I installed plymouth and some themes, on the laptop I entered into the terminal to steup and activate the theme like so:
Code: Select all<USER>@<USER>-Aspire-5336:~$ su -
Password:
root@<USER>-Aspire-5336:~# /usr/sbin/plymouth-set-default-theme --list
aurora-borealis
debian-logo
debian-sunrise-blue
debian-sunrise-mono
debian-vizta
[CODE] ....
It wouldn't load the plymouth theme. Now I installed (debian-jessie-8.0.0-amd64-DVD [stable]) only on the laptop so far, and used the same process as with (debian-jessie-DI-rc3-amd64-DVD [testing]) for installing plymouth and when it got to where it said it was missing firmware I fallowed the:
Code: Select allroot@<USER>-Aspire-5336:~# apt-get install firmware-linux-nonfree
It loaded the firmware just fine. But after I...
Code: Select allupdate-initramfs -u
...and then rebooted the system, the plymouth theme didn't load just like the desktop when I installed (debian-jessie-DI-rc3-amd64-DVD [testing]) on it. I looked at the /etc/plymouth/plymouthd.conf and it reads:
Code: Select all# Administrator customizations go in this file
#[Daemon]
#Theme=text
#ShowDelay=0
[Daemon]
Theme=debian-sunrise-blue
View 2 Replies
View Related
Mar 2, 2011
I installed plymouth theme "spacefun" on Debian Squeeze. It working nicely on booting. But not working on shutdown.
View 2 Replies
View Related
Oct 25, 2010
I've been trying to setup Plymouth on Debian Squeeze, but have only been partially successful: Plymouth works with shutdown (i.e. I see Plymouth after I tell the computer to shut down), but not when I start up my computer (before it reaches GDM). In other words, Plymouth seems to work with my graphics, but for some reason does not show up at startup (not even briefly, as far as I can tell). I've searched the forums and followed this advice, as well as the instructions found here: [URL] but neither of those worked. I'm running Debian Testing (Squeeze) on a Thinkpad X41, which uses "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" for graphics.
View 4 Replies
View Related
Feb 17, 2015
When I login in the kde login in screen starts, but then I hear a beep and it freezes. If I hit ctrl-alt-f2 and log in and then type startx, a blinking curser appears and nothing happens.I am trying to set up VirtualBox to run Windows 7 and I am having trouble getting some usb devices to be recognized in Windows. I tryed following the advice of this link URL...After I added the group vboxusers to my user account and restarted the computer, this problem started.
I ran the command Code: Select alldeluser jrchristophel vboxusers, and I get the response back Code: Select allyou may not remove the user from their primary group.
The other things I did that might have caused this problem was that I installed virtual guest additions for VirtualBox, and one other addition that was needed for the USB functionality with in VirtualBox. I can't remember the name of that which I installed.I have looked at some of the logs in /var/logs.
View 14 Replies
View Related
Sep 13, 2015
I'm trying to install plymouth on my Debian 8.2 Jessie (Stable), but when I boot my pc I get this error:
Code: Select alluvesafb: cannot reserve video memory at 0xdf000000
This is my configuration:
Code: Select allcat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
View 0 Replies
View Related
Dec 16, 2015
I am running Debian Testing and can't get Plymouth Splash to work on my system.When splash is put in the grub line it locks up on boot up.Here are my system specs:
Code: Select alldcihon@solydk64 ~ $ inxi -Fxx
System: Host: solydk64 Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
Desktop: KDE Plasma 5.4.3 (Qt 5.5.1) dm: sddm,sddm Distro: SolydXK 9 solydxk
Machine: Mobo: ASUSTeK model: M3A78-EM v: Rev X.0x Bios: American Megatrends v: 2003 date: 10/12/2009
[code]....
View 14 Replies
View Related
Jan 22, 2010
I've just done an update and installed my nvidia drivers when I noticed my plymouth has stopped working (I think) I only get a really boring boot and I don't really know how to fix this. I've googled around for some tutorials but they did not work.
View 4 Replies
View Related
Apr 22, 2015
I am running this Debian wheezy: URL... on my BananaPro.
I installed Gnome and tried startx but command not found. I installed Xinit but then I get :
Xinit:unable to connect to x server.
View 14 Replies
View Related
Dec 29, 2010
My room mate is trying to use an old Dell he has as a print server. After much twisting his arm, I was able to convince him to go with Debian, which, I would install. I used a 5.0.4 Net Install CD I had, and included Desktop Environment (he needs a GUI), and Print Server. Basically, as usually happens when I install Debian, I am having trouble getting X to work. Heres what the errors look like after X fails:
Ring End Space: 24 wanted 32
Fatal server error: lockup
Waiting for X server to begin accepting connections giving up.
xinit: Connection reset by peer (errno 104): Unable to connect to X server
xinit: No such process (errno 3): Server error
View 5 Replies
View Related
Nov 21, 2010
I have been trying to install Squeeze from the 6.0.1a KDE CD-1 plus the Debian repos. I just cannot get X to work. I get similar bad results to those mentioned by other users having similar problems, but none of the suggested fixes works.
Basic hardware information:
Desktop PC, whole 40 GB disk used for install
Graphics card: none Video controller on motherboard: VIA Technologies S3 UniChrome VGA controller (about 8 years old)
Monitor: Samsung Syncmaster 1280 x 1024 (about 8 years old)
Some things I've already tried: in rescue mode, as root, in /etc/X11X -configuremove file to /etc/X11/xorg.conf basically everything mentioned in threads in past two months regarding users who cannot get X to work reinstalling 100x with every choice for the installer I can think of
What happens: when doing the install, contrary to expectation, I am never prompted for any of the hardware information which the documentation at debian.org says I should have on hand (is that a good sign or a bad sign?)
No matter how I try to do the install,I always seem to get a nongraphical installation, so I try this: as root:apt-get install xorg in /etc/X11X -configthen move generated file (which looks like X didn't try to create an actual configuration file) to /etc/X11/xorg.config as non-root user:startx I get black screen (or a tiny tiny konsole at upper left) and system hangs
How can I tell whether this an X misconfiguration? How can I fix it? How can I tell whether I simply need a driver? Where do I look? How can I tell whether my hardware is simply incompatible with Squeeze? What do I need to replace? Do I need to get a new monitor in order to use Squeeze? Do I need to buy a new motherboard with newer video controller? Do I need to buy a graphics card? Which?
View 3 Replies
View Related
Oct 6, 2010
I'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
View 8 Replies
View Related
Nov 9, 2015
I was able to start multiple X servers before. Now after the upgrade to rootless X, I had to add myself to the "input" group to be able to start X, but I'm unable to start 2nd X on a different vt.
Here are the errors and warnings I'm seeing:
Code: Select all[114940.404] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[114940.409] (WW) Falling back to old probe method for modesetting
[114940.409] (WW) Falling back to old probe method for vesa
[114940.409] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[114940.409] (EE) Screen 0 deleted because of no matching config section.
[114940.409] (EE)
[114940.409] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
I'm on Debian stretch/sid.
View 3 Replies
View Related
Dec 30, 2015
I have been using bumblebee on my Optimus Laptop for a long time.I think I have this problem since the last Xorg upgrade, some months ago. The upgrade notes warned that Xorg now runs on userspace, and that configuration files are now read from the user (although I haven't noticed that).Then optirun ceased to work. As I'm using sid, I'm used to things being broken sometimes, so I simply let it go waiting for an upgrade that would fix it. Since this upgrade (either to Xorg or to bumblebee) is not coming, I have searched on the Internet, and I'm surprised that many people have had problems with bumblebee, but no one seems to be having the same exact error (see below).
I have tried everything (everything my limited knowledge and my internet searches allow me). I have tried with nvidia and nouveau drivers, but I get more or less the same result.
Code: Select all$ sudo systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/lib/systemd/system/bumblebeed.service; enabled; vendor preset: enabled)
Active: active (running) since mié 2015-12-30 09:30:34 CET; 20min ago
[code]....
It seems Xorg is failing but is not giving any information about the failure, no message, which is different to the problems I have found in the Web.
I have purged bumblebee packages to assure I'm using default configuration files. I have added rcutree.rcu_idle_gp_delay=1 to GRUB_ CMDLINE_ LINUX_ DEFAULT as instructed on some howtos.
View 2 Replies
View Related
Jan 24, 2016
I asked the question on LQ, but since activity related to Debian there is smaller, it is here.
I can't start Openbox, using xinit or startx. I have a warning when using xinit:
Code: Select all***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:
imlib_context_free();
With the parameter:
context
being NULL. Please fix your program.
I don't have dbus, display managers, X is started on tty3 because I reduced the number of ttys. In xinitrc there is
Code: Select allexec openbox-session
I see a cursor appearing for a second, but then the screen goes back to tty.
The problem is new; I'd been using Openbox for a couple of months back then, and it was fine.
System is Unstable.
View 11 Replies
View Related
Mar 29, 2016
I recently installed debian 8 stretch with xfce. Since the first time I boot, I have problem starting my X session: from lightdm I always attemped 2 or 3 times before it login (it returned me on lightdm prompt after a short splash screen).
Now it stopped working: the only way I can start xsession is running startx as root. When I try as user it starts the "splash" and return me to the tty with this error message:
Code: Select allServer terminated with error (1). Closing log file(EE)
This is my ~/.local/share/xorg/Xorg.0.log
Code: Select all[ 27.703]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 27.704] X Protocol Version 11, Revision 0
[ 27.704] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 27.704] Current Operating System: Linux debian 4.3.0-1-686-pae #1 SMP Debian 4.3.5-1 (2016-02-06) i686
[Code] .....
And this is my /etc/X11//Xsession
Code: Select all#!/bin/sh
#
# /etc/X11/Xsession
#
# global Xsession file -- used by display managers and xinit (startx)
# $Id: Xsession 967 2005-12-27 07:20:55Z dnusinow $
[Code] ....
and this the .xsession-errors:
Code: Select allXsession: X session started for lucatastrophe at Tue Mar 29 10:21:09 CEST 2016
localuser:lucatastrophe being added to access control list
openConnection: connect: No such file or directory
cannot connect to brltty at :0
dbus-update-activation-environment: setting MAIL=/var/mail/lucatastrophe
[Code] ...
I try to reconfigure Xorg but the Xorg -configure command result in another segmentation fault.
I think that the problem could be related with old configuration (when I install this version of debian I maintain the /home partition and my previous OS was debian 7 with xfce).
View 7 Replies
View Related
Jul 1, 2010
Linux noob here with a very fresh Debian 5.04 install. Not sure if this is the correct board for this but here goes;*No* programs start in X. Terminal, System Monitor, Epiphany, Gedit, Synaptic Package Manager... They all fail to start.The programs try to start for 15 seconds after which they give up. For example, if I press the Epiphany-icon in the panel I see "Starting Epiphany We..." in the lower-left corner and the mouse cursor changes to the loading animation for 15 seconds but then after that nothing happens and the "Starting Epiphany We..."-icon disappears. I have two users (plus root of course) and the same thing happens with both accounts.
I can start the icons I have on my desktop (Computer, Home folder, Trash and Downloads) and I can Lock the screen/log off/shut down but that's about it. Oh and one more thing; sometimes when I log in everything works just fine, so this whole thing seems a bit random.
View 6 Replies
View Related
Jul 5, 2010
I have recently install Blender on my system (squeeze, 2.6.32-5-amd64, ATI Radeon HD 3100) and when I try and start it I get a segmentation fault. I am using the proprietary driver. When i run glxinfo or glxgears I get a segmentation fault as well which makes me think I have an issue with my hardware acceleration.
I am really suck when it comes to trying to diagnose the problem any further and would appreciate any help you guys have. My system is up to date and Blender has worked before on an almost identical setup (i reinstall debian a while back, may have been using a slightly older kernel then).
View 3 Replies
View Related
Jul 26, 2010
I have installed ubuntu 10.04 lts -- I was wondering why it didn't start cupsd or something on boot?
I have installed the same ubuntu on another unit (same specs) with no problem on printing.... but this one (I'm swearing a lot now!) because it doesn't work... Been at this for 3 days in a span of one month -- and I started to think that this computer is hard headed GR!!
I'd like to bash it -- sorry but I'm really really annoyed -- to put it softly.
I'd like to know why it's not working as smoothly --
Currently I need to $sudo cupsd to make printing work every time I power on this computer.
View 6 Replies
View Related
Aug 27, 2010
I tried to install Skype, using the Debian download from Skype, but it didn't want to play. I downloaded the Ubuntu 64-bit deb and installed it with Gdebi. I started the application from the terminal and accepted the 'User Agreement'. Skype then tried to log me on, and I got the following error and the app closed:
Inconsistency detected by ld.so: dl-open.c: 611: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
View 7 Replies
View Related
Dec 5, 2010
I use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.
View 2 Replies
View Related
