After doing Debian's apt-get dist-upgrade from Wheezy/oldstable to Jessie/stable, I decided to try Kernel v4.2.0 instead of v3.16.0-4-amd64 to be even more updated. However, X doesn't work. /var/log/Xorg.0.log showed:
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 453.305] X Protocol Version 11, Revision 0
[ 453.305] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
I have installed debian 8.8.1 stable and run updates. When I run the cat release command it shows stretch/sid. I made no changes to the apt/sources list.
What do i have to do so it only updates with the stable release I am planning to use it as a server and only want stable fixes.
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies View RelatedI am just trying to setup my debian 8.2 stable in my Intel(R) Atom(TM) CPU N2600 @ 1.60GHz. The installation goes smooth without any issues. For this system , we are planning to use DUAL display with HDMI & LVDS.
We see that that only HDMI is working and LVDS screen is blank. However, we notice that XRANDR is is showing LVDS as connected
XORG.log:http://pastebin.com/LX9HhRui
KernlogINfo:http://pastebin.com/U2E09iZk
lspci:http://pastebin.com/eBC8wLVu
xrandr:http://pastebin.com/bS5NmAnQ
dmidecode:http://pastebin.com/2qSsHE1s
I am having this problem on my old 64-bit Debian box (stable's Jessie) box, but nothing seems to fix it from what I saw online like in [URL] ... and other forums. Maybe I missed something?
Code: Select all$ sudo apt-get update
Ign http://dl.google.com stable InRelease
Hit http://dl.google.com stable Release.gpg
Ign http://ftp.us.debian.org jessie InRelease
Hit http://security.debian.org jessie/updates InRelease
[Code] ....
I update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:
Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table
I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.
And also something appears to have happened to the raid device since the update.
Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.
mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0
I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
I have just did a fresh install debian jessie today in virtualbox, the X window manager is fxce. By default the default runlevel is 5, and I tried to change the /etc/inittab content:
Code: Select allid:3:initdefault:
and reboot, but it didn't effect to the result, the X-window auto loaded again >.<
I need to change it that will boot in to console mode first, and can run startx if necessary, how can I change it permanently?
How to enable the cairo dock at start up on debian jessie? Apparently there is no way to automatically lauch it at system reboot?
I've been also trying the following solution but with no result [URL] .....
I recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.
I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.
However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
I have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y
I have a fresh install of Jessie and I am unable to disable gdm3. I issued:
Code: Select alluser@debian:~$ sudo systemctl disable gdm3.service
Synchronizing state for gdm3.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d gdm3 defaults
insserv: warning: current start runlevel(s) (empty) of script `gdm3' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `gdm3' overrides LSB defaults (0 1 6).
Executing /usr/sbin/update-rc.d gdm3 disable
insserv: warning: current start runlevel(s) (empty) of script `gdm3' overrides LSB defaults (2 3 4 5).
insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `gdm3' overrides LSB defaults (0 1 6).
Restart and still displays the Gnome 3 login manager.
Recently tried to make RAID1 on MBR partitions scheme on Debian Jessie - debian-8.1.0-amd64-DVD-1. The issue - I have unable to boot from second drive after grub-install /dev/sdb by any ways. RAID1 itself for / swap and home is fully functional. Decided to try the same thing on GPT, same story. How to boot from second drive on most recent Debian Branches?
View 9 Replies View RelatedFor some time now I have been unable to update flashplugin. I have been waiting the problem to fix itself, but no.
Here is what happens when I try to update flash:
Code: Select allrob@ace:~$ sudo update-flashplugin-nonfree --status
Flash Player version installed on this system : 11.2.202.457
Flash Player version available on upstream site: 11.2.202.460
flash-mozilla.so - auto mode
link currently points to /usr/lib/flashplugin-nonfree/libflashplayer.so
/usr/lib/flashplugin-nonfree/libflashplayer.so - priority 50
[Code] ....
The same thing happens on both my Debian Jessie machines..
Any way to force the update? Need to update their flashplugin on Jessie?
I have tried to use the extensions toggle-touchpad and touchpad-indicator that claim to be able to do this, but neither will load properly. They show up with a little exclamation-point-triangle in the "Tweaks" panel saying "Error loading extension". How to get Jessie gnome system succeeded in getting their touchpad disabled via a simpe toggle mechanism?
View 5 Replies View RelatedFor some reason is not updating. Not sure why, Use KDE for most everything, but have some GTK apps installed.Not sure where to look to get past this error message. I've checked in yast and all the updates are there. did a rpm --rebuilddb, but this hasnt resolved the issue.
View 1 Replies View RelatedI'm running Debian 8.4 on a Lenovo W500 laptop and I recently upgraded from kernel version 3.2.0-4 to 3.16.0-4. Since then I encounter issues with lightdm (I suppose) which manifest themselves in two different scenarios:
1) scenario 1: lightdm fails to start.Instead of showing the graphical login screen, the system boots into terminal. Lightdm seems to be running, but I can't enter the X-Session (Alt+Ctrl+F7 doesn't work), nor can I restart the lightdm via
Code: Select all# service lightdm stop
# service lightdm start
dmesg shows the following (I've only pasted the end of dmesg):
Code: Select all[ 240.100071] INFO: task kworker/0:2:39 blocked for more than 120 seconds.
[ 240.106512] Not tainted 3.16.0-4-amd64 #1
[ 240.112956] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.119494] kworker/0:2 D ffff880155155a48 0 39 2 0x00000000
[code].....
and /var/log/lightdm/lightdm.log shows errors of type
Code: Select allGtk-CRITICAL: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed
when I then try to shutdown via
Code: Select all# shutdown -h now
the OS gets stuck on a message of the form
Code: Select allirq 17: nobody cared
and eventually I have to force a shutdown by holding the poweroff button.scenario 2: lightdm starts, but can't be stopped/In this case I can login and use the system as usual, but when I try to shutdown either via # shutdown -h now, or via the GUI or the power button, the system gets stuck and I have to force a shutdown by holding the poweroff button.It seems that people had similar issues on other distros (see e.g.: URL... but there doesn't seem to be a good fix so far. I can for now solve the issue by downgrading the kernel to 3.2.0-4, but I was wondering if there is a permanent fix.
I was able to start multiple X servers before. Now after the upgrade to rootless X, I had to add myself to the "input" group to be able to start X, but I'm unable to start 2nd X on a different vt.
Here are the errors and warnings I'm seeing:
Code: Select all[114940.404] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[114940.409] (WW) Falling back to old probe method for modesetting
[114940.409] (WW) Falling back to old probe method for vesa
[114940.409] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[114940.409] (EE) Screen 0 deleted because of no matching config section.
[114940.409] (EE)
[114940.409] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
I'm on Debian stretch/sid.
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI am unable to download rpmfusion-free-release-stable.noarch.rpm from [URL]. i always get a error 404 -Not found. But i am sure my internet is working fine. I tried from windows, Fedora 14 got the same error message all the time.
View 7 Replies View RelatedI've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
I've been setting up a Lenovo Thinkpad T420i and have gotten most of the kinks worked out, except for the fact that the display has some annoying artifacts as you navigate around, I guess due to bad video support. A post [URL].. on the same machine said that upgrading all X packages to sid (unstable) fixed these problems, but those packages aren't available in stable.
I read another post (can't find the link now) that said Debian wasn't planning on backporting all the X packages, only related libraries and modules. And I don't know which ones specifically would fix the issues I'm having.
So I thought I'd ask what my options are. I could update all those to unstable, but that doesn't seem optimal (and in the future I don't want unstable bugs bringing down my whole X session). Is there a way to find out what I need and backport some myself. Or do I just need to wait until the appropriate packages filter down to stable (or at least backports)?
Will Debian 6 stable have ext4 filesystem?
View 10 Replies View RelatedNow that we are on Debian 6 it seems that Quanta Plus is not yet available because of it not running with KDE 4 ....?
I have blocked my main work horse on 5 that is ok, but I have upgraded my laptop to stable its nice and fast and very much more multimedia
But no quanta, I can use kate and have tried a bunch of other editors none manage projects like and are complete as Quanta I am totaly addicted to it!
I have tried having lenny and squeeze together in the source list but I get BIG dependencies problem and fear stability isuues as I am not sure what I am doing
I had an Idea of putting an Ubuntu 10.10 source in there as it works on that, any body tried this ?
I currently have squeeze installed and was wondering how I upgrade to stable 6.0.1, 6.0.2 etc.Would I be correct in doing apt-get update then apt-get upgrade?
View 1 Replies View RelatedWhen I open an .mkv video file with SMplayer or VLC in Debian Stable, there is no sound, only the motion pictures, and VLC returns an error about alsa. But mkv files play normally, with sound, in VLC and MPlayer on Debian Testing. How can I get the sound from .mkv to work in Stable as well ?
View 6 Replies View RelatedI am struggling to get Debian 8 stable to boot on an apple powermac g5. I installed using guided partitioning, and chose the all on one partition scheme. I am able to select the Debian hard disk from the boot drive selector from mac. I get to the first stage bootstrap, press L for Linux, and then it simply redirects me back to the drive selection. However, after I'm redirected the colors are messed up.
View 11 Replies View RelatedI have debian sid installed, but when run the command aptitude dist-ugrade there is 202 packages nearly all the kde desktop and when run the safe-upgrade there is every day some upgrades, so want to use the latest stable debian, i have look on the debian dists and there is debian 6.0, sid, squeeze, stable and wheezy. what is the name of latest stable debian dist?
View 2 Replies View RelatedAny idea if there is a kernel 2.6.37 stable, for Squeeze? Packaged one preferably , if an address is given for download, if there is one.
View 6 Replies View Related