I've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
When i logged into a gnome desktop i got this message: "The GNOME session manager was unable to read file:'/home/(desktop name)/ICEauthority'. If this file exists it must be readable by you for GNOME to work properly. try logging in with failsafe session and removing the file." What commands do i use for that? or do i need to do something else?
View 2 Replies View RelatedI am getting no packages listed in Gnome application manager gpk-application 2.27.2. I have tried 'yum clean all' and get the following error messages.
View 3 Replies View RelatedIn the murky world of X11, window managers, session managers and desktop environments I cannot seem to figure out how to achieve the following in Squeeze:
1. Leave Gnome installed, but prevent it from launching when typing startx
2. Have both X11 and my prefered default window manager (blackbox) startup when I type startx (or similar)
My ultimate goal is to leave Gnome installed but "dormant" and when I do a remote ssh -X be able to use X11 forwarding with blackbox.
Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies View RelatedI am using Ubuntu version 9.10, which desktop application is better Gnome or KDE?
View 6 Replies View RelatedAs per the title, the per application volume mixer has disappeared and I can no longer unmute things i have previously muted.
View 2 Replies View RelatedHad a boot failure last night; first one for 11.3 64 bit:
Aug 23 19:32:06 suse1 gnome-session[4822]: WARNING: could not read /etc/xdg/autostart/ksmolt-autostart.desktop
Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: unable to create keyring dir: /home/rthornto/.gnome2/keyrings
Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: couldn't write to file: /home/rthornto/.gnome2/keyrings/login.keyring: No such file or direct
ory
[Code]...
I have a java program that needs to be launched with root privileges (from an account that doesn't have root privileges) from a desktop shortcut. The command would look something like this: java -jar /file/location/whatever.jar I've searched and searched and can't figure out how to do this. EDIT*** I would like it to pop up and ask for the root password before it launches the application.
View 3 Replies View RelatedI order to build an kiosk environment how can I start gnome, or any other desktop manager with this specifications:
with no menu bar
with no task bar
disable the right click on desktop
i recently installed OpenSuse 11.4 on VirtualBox into Windows Xp, i read some where that dvd version has both KDE and Gnome desktops, so my OpenSuse desktop is KDE now, How can i change Desktop manager to Gnome
View 4 Replies View RelatedIt's all in the title : the network manager & power manager applets don't start automatically when I open a new GNOME session, although they are checked in the "startup application" dialog...
View 7 Replies View RelatedI am installing Debian for the very first time and having read websites similar to [url] I have come across parts of the installation which I do not understand.
For example, I have created logical volumes using the logical volume manager however am unclear what the message regarding writing changes to disk before configuring Logical Volume Manager means.
Once I have created the volume group, I am presented with a window that provides me with the ability to
Display configuration details
Create volume groups
Create logical volume
Delete logical volume
Extend volume group
Option 2 is pretty self-explanatory however am unsure whether it is advisable to segment directories between 2 or more volume groups. What benefits does it serve?
Option 5 provides me to extend a volume group however am unsure how this works?
Does it mean I can assign free space available one 1 physical drive to the existing volume group or does it mean I can assign free space available on a second phyical drive or does it mean both? How does it affect security, performance, etc?
Currently the only way I can see the logical volumes I have created by selection Option 4. Is there any other way? How do most people keep track of the logical volumes they have created e.g. checking off against a checklist, etc?
Next I have the ability to map the logical volumes to mount points however am confused what purpose the none mount point serves as I have the option to select it?
What are mount options for?
What do I use labels for?
What are reserved blocks for?
What does typical usage refer to?
How does the option to copy data from another partition work? What is it for?
Has anyone else experienced issues with this option? Using the tweak tool from Malcolm's repo. If I set it, it works in the current session. But after logout, I can't login again. At login the desktop appears briefly then closes back to the login screen.
View 9 Replies View RelatedI've recently updated to Ubuntu 10.10. At first I had no problems, but after the third time I logged in, my desktop background appeared (and nothing else) but quickly flashed to a black screen with some error messages (too fast for me to see) and I got sent to the login screen. After trying some more times I got the same problem with some small differences(sometimes my desktop icons showed up, other times it took a couple of minutes before I got kicked out).
I tried running startx from the terminal but got one of these two error messages: Server already running or could not find any listening ports. If I run "sudo startx -- :1" to switch the port I login fine, but as the root user. Gnome works perfectly here and when I login in gnome-failsafe. This leads to believe it has something to do with my user configuration. I've restarted xorg server, installed gnome-main-menu and made sure if got the current gnome package.
Installed a new graphics card in a friends computer and now gnome desktop does not want to start! Instead only r command prompt is showing!
View 1 Replies View RelatedI'm curious, I believe that one of the ways that OSX make the GUI experience of *nix more 'snappy' was to ditch X and run the window manager more directly on the hardware.
If I'm looking to run Linux on a desktop, and have no interest in sending Windows to other machines on the network, can I run KDE or Gnome with no 'X' to eliminate that ever-so-slight lag with the window manager experience.
I guess basically what I'm asking is is there an equivalent of quartz for Linux?
After power off the Gnome desktop environment does not start on my machine. It never gets past the splash screen with Fedora logo.The OS boots, and I can ssh and even run graphical applications, such as Thunderbird, remotely. No errors are reported in /var/log/Xorg.0.log. There are errors reported in .xsession-errors (attached) but I do not now how to recover from them
View 8 Replies View RelatedI ve been using 64 bit ubuntu maverick since its initial release and today i tun on my laptop and the gnome desktop does not work or it could be the x server i dont know all i know is when i turn my computer on all goes well till the point where you see your wallpaper and the desktop menus well i can only see a wallpaper and my mouse cursor nothing else works and I cant click on aything and ive also tried some keyboard shortcuts they too do not work help me guys please how do i know whats wrong??
View 3 Replies View RelatedPrevious used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties:
Supports virtual desktop (need 4 minimum) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first screen when 2nd screen is unplugged Keyboard shortcut friendly Not too hard to install Works well with minimum hardware such as integrated graphics.
Our office moved yesterday. I shut down the computer cleanly and physically moved it to the new location. On startup, the wallpaper shows on both monitors, and the login screen. But, when I log in, I get failed to load session "gnome"
I am using Fedora Core 15. The only hardware that changed is I swapped out my cordless usb mouse for a corded one because I left the dongle at home. How I can I troubleshoot the problem and get my computer up and running again?
I use ubuntu 10.04 in VirtualBox (upgrated from 09.10), host os is Win7.
3-4 days ago update of ubuntu required restart of Ubuntu (linux kernel was updated).
After 3 days (i.e. yesterday) I restarted the system. I found that flashlib in Chrome became to work unstable, some artefact appeared, and only scrolling down-up in browser allowed to update view of screen. I run update manager. It showed ~88Mb of updates for last 3 days.
After download of updates, apply changes was failed! I faced this first time (!). I remember message like "can not synchronize file /usr/share/..." or something like that.
I restarted ubuntu again. Now I could not login. System hangs after login. No Gnome menu appears etc.
I tried to fix issue using dpkg. I found that some lib (ure) related to OpenOffice was not assigned (version XXX required, but bersion XXXY found). dpkg offered to solve this by some combination. I did so. Then I run dpkg update, and no errors appeared.
Also I updated VirtualBox to version 3.2.4, updated VirualBox Additions via console terminal in ubuntu.
But still I can't fix problem with gdm/gnome.
dpkg-reconfigure gnome-*** did not help for me.
I tried to check logs, but I have not found something "interesting".
At the moment terminal is the only way to login.
I looked around for threads addressing this issue and some have come close to answering it, but I have yet to see a definitive yes or no. Anyway - Here's my issue:
Background:
I can SSH into my home computer (Ubuntu 9.04 running Gnome) from work (Win XP Pro) using RealVNC via Putty tunnels. This has been working flawlessly for me for awhile now. I was messing around in the terminal window and accidentally rebooted the linux box (home computer) while I was at work. No big deal I thought. So I re-start the Putty connection, and it is back up in no time. Then I try to start the VNC connection, and no go, connection refused. I remember seeing that in order for the VNC connection to work, I had to be logged into the Gnome desktop already on the Ubuntu box.
Question:
Is it possible to log in and start up a Gnome desktop session from the terminal command line in Putty so I can get the VNC connection back?
I have upgraded my EeePC from 9.10 to 10.04 and got now a black screen after I can login. On the right upper corner, I find an error message:
Quote:
Install problem!The cnfiguration defaults for GNOME Power Manager have not been installed correctly. On the bottom bar I selected English / USA / GNOME for Language / Keyboard and Session Above is the best I ever could come, but most of the time I only can type in the password, and it stops there, without bottom bar (language/keyboard/session), but with the Error.
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I am new to this debian plotform. How can I add my app to init.d linkup.
I did my programe for I2C Bit banging method and got output on Beaglebone black rev.C hardware.
I want to run my code after booting of beaglebone with out connecting to laptop or login process.
I want just powerup,then run my programe default.
/***************************Extra Information*************
#etc/inittab file
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
[Code] .....
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I install SuSE but I can use only command on line how can I switch to KDE or Gnome. This is the first time I use linux.
View 1 Replies View RelatedI initially installed Debian with the Gnome desktop. I recently installed the KDE desktop enviro to try it out, but when I log-in to it, a big grey box with a white horizontal volume level bar in it shows up in the middle of the screen, and you can't get rid of it. It is always on top, on top of any other open app or window. Trying to quit Kmix from the panel bar doesn't help, it doesn't even get rid of Kmix, it immediately reloads and pops back up in the bottom panel bar. Also, you can't adjust the volume with the Kmix icon, when you raise the volume lever, as soon as you let go, it goes back down to 0 level. I tried searching, but couldn't find anyone else who complained of the same problem. Using pkilll to kill Kmix didn't help either, it just reloads.
View 4 Replies View RelatedI would like to setup fedora for fullscreen, touchscreen, noexit application. So whenever you'll boot or restart the application will automatically starts. I thing there are these step required:
1. autologin
2. start fvwm after login instead of default DM - gnome
3. run application
how to autologin in fedora but it still shows that fedora gui login screen for 10 seconds and then it logs in. My problem that I dont know how to start fvwm and configure it to empty desktop (no toolbars no nothing) instead of gnome.
