I have installed VirtualBox and since then resuming from hibernation doesn't work again (my previous thread: [URL] ....). My question is: Can VirtualBox kernel modules (vboxpci, vboxnetadp, vboxnetflt, vboxdrv) break hibernation? If yes, what to do? Maybe unload them before hibernation, blacklist when resuming and load after resume? And how to do that with systemd? URL....
View 4 RepliesI use Debian Jessie with Linux 4.4.6 from backports and obviously systemd. My graphics card is Intel HD 5500, my processor is Broadwell i5-5200U. I use Toshiba Satellite Pro laptop.Suspending to RAM works fine, but I have problem with hibernation. Resuming from hibernation also works, but only when time between hibernating and resuming is a few hours. When this time is for example 10 hours (I hibernate before going to sleep and resume next day morning), I can't resume from hibernation. I see only black screen and keyboard doesn't work. In that case when I type in terminal
Code: Select alljournalctl
I can see:
Code: Select allPM: Starting manual resume from disk
PM: Checking hibernation image partition UUID=8640b415-7de4-48c2-b6ab-2629a5894316
PM: Hibernation image partition 8:4 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
This is weird, because when I hibernate and resume after 2 hours, everything is OK. My SWAP is large enough (I have 16 GiB of memory and 16 GiB of SWAP).
I have Code: Select allGRUB_CMDLINE_LINUX_DEFAULT="quiet resume=UUID=8640b415-7de4-48c2-b6ab-2629a5894316 acpi_osi=linux i915.enable_rc6=1 i915.lvds_downclock=1 i915.enable_fbc=1 pcie_aspm=force" in /etc/default/grub and Code: Select allRESUME=UUID=8640b415-7de4-48c2-b6ab-2629a5894316 in /etc/initramfs-tools/conf.d/resume
I hibernate my computer using hibernate button in Kickoff in KDE Plasma.
The problem is black screen after resuming hibernation.After I switch my computer on (after hibernation), I can see some progress bar and (after loading to 100%) black screen appears.I have Debian + GNOME and I DON't have xscreensaver.
View 2 Replies View RelatedI bought a laptop from ZaReason (zareason.com) with Ubuntu already installed. I am currently running 10.10. The machine has worked great but recently has had problems coming back from hibernation. This is a new problem and did not seem to coincide with an update or new software. When I try to "wake up" my laptop, it shows a bunch of text (I am not that computer-literate, so I don't understand the text) and becomes unresponsive. I will insert an image of my screen when it is frozen: DSCF7055.jpg
View 2 Replies View RelatedTouchpad on my laptop does not works after I resume it from hibernation/suspend. I have FC9 (sulphur) installed on my system.
View 3 Replies View RelatedHibernation on my laptop doesn't work. When I try to hibernate (either manually or automatically because battery goes critically low), any of the following can happen (randomly):
A. During the hibernation process it hangs forever with a black screen (with or without some error messages unanderstandable to me) and never terminates hibernation. I have to manually turn it off by holding the power button, and when I turn it on again, it does a fresh boot.
B. Instead of hibernating, it just locks screen.
C. It (apparently) terminates the hibernation (the power goes off automatically as if it had succesfully hibernated, even if AC power is connected), but then, when I turn the computer on, instead of resuming it does a fresh boot.
D. It hibernates succesfully and when I turn it on it resumes succesfully. This almost never happens; it has been a long long time since the last time it happened.
I am far from being the only one and this has been so for years. The bug has been reported in launchpad by a lot of people a long time ago, so if it has not been fixed in such a long time it must mean that the developers don't think it deserves much attention. (Which is strange by the way, because an operating system with non-bulletproof hibernate/suspend is an operating system that you just cannot safely use, at least on a laptop.)
After the upgrade, I've noticed a problem I haven't had before - hibernating worked fine to the last. The problem is, although the system correctly hibernates, it makes no attempt to "wake" from hibernation when I power it up - it boots normally, and with fsck-ing like it was powered off without proper shutdown (understandably). I don't know why it happens, and I've skimmed the logs, but noticed nothing special. What could be the problem? What could I try? Which log should help someone find that out?
View 2 Replies View RelatedI'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014
X Error of failed request:Â BadValue (integer parameter out of range for operation)
 Major opcode of failed request: 109 (X_ChangeHosts)
 Value in failed request: 0x5
 Serial number of failed request: 6
 Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
I installed the adobe plugin, and my browser crashes. I uninstalled it, and installed the one in the apt repository (mozilla-plugin-gnash) and it shows up in my about: plugins in iceweasel, but flash just doesn't play.
View 4 Replies View RelatedI'm running newest pidgin on sid and i have few problems. First of all notifications doesn't work (plugin is of course turned on), also even when i turn on blinking icon it's not blinking. Oh and why the tray icon is so small now?
View 1 Replies View RelatedI have problems with xrandr in a system with Nvidia GeForce 8600GT video card. I want to use xrandr to rotate the screen on the fly.
~:$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 50.0*
1600x1024 51.0
[Code]....
I tried enable the last option, change values for xinerama and twinview, but nothing works.
Just as the title says: I installed iceweasel 6 in debian squeeze (via mozilla.debian.net) and while errors and requests are captured in the web console, I simply cannot use it to evaluate arbitrary javascript I type in it.
Does anyone have this problem as well? It's been like this since v5 as well. I already tried purging and reinstalling, as well as running with another profile.
I've tried installing both ibus-anthy and ibus-mozc in Jessie but I still cannot input Japanese.
By contrast, In Wheezy, when using anthy for example, I can see ibus preferences icon where I can configure ibus and anthy. This doesn't show up in Jessie.
I recently install a Debian 8.0 Jessie on a Laptop Dell latitude E6540 with gnome 3.14+3. But the problem is that it doesn't recongnize my multimedia buttons, I tried some methods but I didn't get results.
Code:
Code: Select all$showkey --scancodes
volume up  -- 0xe0 0x30 0xe0 0xb0
volume down -- 0xe0 0x2e 0xe0 0xae
volume mute -- 0xe0 0x20 0xe0 0xa0
$showkey --keycodes
volume up  -- 115
volume down -- 114
volume mute -- 113
[Code] ....
When I reassinged the keys on Settings>Keyboard>Shortcuts to F7, F8 and F9 it works, but when use the keys volume up, down and mute It doesn't show anything.
The same happens with Fn + Brightness keys, in this case it worked the first time but then stop to work I don't know why..
I am having trouble getting evolution to work properly with my imap server. It won't show any messages. Icedove works fine, though. I'd rather use evolution because of the calendar. I'm not sure what I am doing wrong. The IMAP server is hosted by network solutions. I have screenshots of both clients. I've blacked out a few things for privacy.
Here are screenshots of evolution as configured:
Here are screenshots of icedove's configuration:
I just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
        2560 2608 2640 2720 hborder 0
        1440 1443 1448 1481 vborder 0
        +hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00"Â 241.50Â 2560 2608 2640 2720Â 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request:Â BadMatch (invalid parameter attributes)
 Major opcode of failed request: 140 (RANDR)
 Minor opcode of failed request: 18 (RRAddOutputMode)
 Serial number of failed request: 31
 Current serial number in output stream: 32
not sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.
View 4 Replies View RelatedAfter upgrading to gnome 2.28.2 and Nautilus 2.28.4, nautilus leaves text file(including .php .jave etc,.) icon blank while it works well with image and pdf files.
gnomevfs-info asd
Name : asd
Type : Regular
MIME type : application/octet-stream
Size : 27433
Not showing "Default app" but automatically opened by gedit. I am sorry but I don't really know what info matters. So tell me what info I should post here.
Every time I boot my machine, some of the playback values in alsamixer are set to 0 and are muted, so I have no sound.
The thing is, I have tried setting these to normal levels and then run sudo alsactl store. Then, if I run sudo alsactl restore after I reboot, the sound comes back up. However, if I have alsactl restore in /etc/rc.local, it doesn't work: I still get muted sound when I reboot. I have to run sudo alsactl restore manually each time.
I have already checked whether /etc/rc.local runs at startup, and it does. Also, I know that /var/lib/alsa/asound.state contains the correct values, because when I run sudo alsactl restore, the sound returns to normal levels. So what remains is either alsactl restore doesn't work in /etc/rc/local, or something runs after it and mutes the sound.
I have some troubles with my microphone.I can hear it in ootput if I knock on it or speak, but I can't record from mic. It also does not work in skype.cant figure out what is the problem.
View 5 Replies View RelatedI'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
Although it's worked very consistently in the past, since moving to the newer kernels (3.16 or 4.0) on strech/sid, resuming from hibernation seems to randomly work -- sometimes it loads the image from swap, but other times it simply does a fresh boot. To troubleshoot, I've increase the size of swap and then updated 'fstab', the initramdisk, and grub -- but still no reliable behavior...
View 10 Replies View RelatedMy suspend-to-disk and suspend-to-RAM stopped working months ago. I've grasped at straws about why ever since, but I really don't think it's a software problem, because I've reinstalled my system (MEPIS) repeatedly. What sort of hardware failures could cause this? What should I be looking for? I notice that at boot, Linux always says "no resume image found," even if I left the system in suspension or hibernation. I can post parts of the dmesg if someone tells me what to look for; I can't display the whole thing because it's too long to fit here.
View 7 Replies View RelatedWhen I suspend my computer, everything resumes fine... but the sound. The sound actually still works for the internal speakers, but not anymore for any jack-plugged headset or speakers. If I reboot, it works again. I also see nothing in the logs (dmesg, /var/log/messages).
These two commands return the same thing before and after resuming:
Code: Select allwoowoo:~$ cat /proc/asound/cards
 0 [HDMI      ]: HDA-Intel - HDA Intel HDMI
           HDA Intel HDMI at 0xf7a14000 irq 34
 1 [PCH      ]: HDA-Intel - HDA Intel PCH
           HDA Intel PCH at 0xf7a10000 irq 33
[Code].....
I also tried
Code: Select allsudo alsa force-reload
As it was recommended a lot when I googled it, but it seems that the alsa bin/script is not available on debian. It tells me repeatedly to install alsa-base, which was already installed. The following commands have been run one after the other, in that order:
Code: Select allroot:~# alsa force-reload
The program 'alsa' is currently not installed. You can install it by typing:
apt-get install alsa-base
alsa: command not found
Code: Select allroot:~# sudo apt-get install alsa-base
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
alsa-base is already the newest version.
[Code] ....
How to prevent me from rebooting each time I need sound after suspending my computer?
I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
I have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...
It's been almost two months since this problem started. I'm running 9.10, Karmic Koala, with all updates. I was hoping one of the updates would just fix this problem.
The microphone does not appear to work at all. It seems to exist because I have a choice for "Internal Audio Analog Stereo" under "sound preferences," but I don't know how else to check whether this is true. Sound Recorder does not record anything and Skype does not capture any sound from me.
how to run commands in the terminal and I consider myself an intermediate user, I just don't know anything about sound.
I just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....