I am new to Linux and installed Debian. After the Installation I started Debian and ended in a black screen. I came out there changing to a terminal (ctrl+alt+F1) but I dont know how to get Xorg running. I am using the Mainboard:Gigabyte GA-D510UD without any extras (means just the Mainboard with Ram and an IDE Hdd). here is the Log file from Xorg [URL]... System Information is in the log.
View 7 RepliesI upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.
View 4 Replies View RelatedI'm trying to install Xorg manually in Squeeze on my IBM X30 Thinkpad with intel graphics (it works in Lenny). I used aptitude and installed "xorg" and "fluxbox", but when I restart my computer I get a blank screen, instead of the console login request that I was expecting. (Note: I did not install any login managers). So exactly what happens is that the screen goes black (just backlight on)during boot process. Once I'm at the black screen doing CTRL+ALT+Backspac, Ctrl+Alt+Del or Ctrl+Alt+F[1-7] will not result in anything.
I tried booting with the single user mode, but same result, so the only way I could acess my log-files was by using a systemrescue-CD. What I find odd about this is that I cant find any configuration files at all. No xorg.conf anywhere in /etc, /etc/X11, nor in /home. I don't even have a /etc/X11/xorg.conf.d folder.Am I expected to write these by myself? And if Xorg is the source of my troubles, why is it starting by itself, without any installed login managers? Xorg not working is one thing, but not even being able to access the console, or log in to my computer makes it rather difficult to search for errors.
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
The X server in Debian seems to have a "funny" habit to suddenly start blanking the screen if I don't touch the mouse or the keyboard for a while, although I've used the xset command (xset -dpms s off) in my ~/.xinitrc to tell Xorg specifically NOT to blank the screen. I know how to disable screen blanking in /etc/X11/xorg.conf, but I'd rather not have the xorg.conf file at all.
So, I'd be interested to hear your suggestions about how to disable the Xorg screen blanking without using the xset command or the xorg.conf file. Is there some other file in /etc/X11/ that I could tweak to disable this highly annoying desire of Xorg to insist on blanking my screen after a bit of idle time?
After a install on a old Toshiba today everything looked fine. But when i tried to start Xorg it start but doesn't use my whole screen. It is not a resolution problem it just doesn't use the whole screen. Hopefully this explanation is understandable. On lenny i had the same issue but once i changed the console resolution size in grub everything was fine. Sadly this is not the case with squeeze. I already tried "X -configure" and had a look at the generated xorg.conf (posted below)
[code]....
After that is tried to run the generated xorg.conf but then it just frooze.
I have upgrade Ubuntu 9.10 to 10.4 on my Dell Inspiron Desktop and OKI TV monitor. After reboot the new version I can read the menu.lst on the screen and i select ubuntu 10.4 but after the screen is black permanently and the boot process stop. I have tried with a acer monitor and all is OK, but i would like use the OKI monitor. With the OKI monitor I have not problems with old versions of Ubuntu, neither Ubuntu CD Live, neither Knoppix. I have see that there is not /etc/X11/xorg.conf so I have tried with differents xorg.conf files:
a) with dpkg-reconfigure -phigh xerver-xorg
b) copying xorg.conf from Ubuntu 8.10 Live LoW Graphics mode
c) copying xorg.conf from Knoppix Live
but the result is the same : black screen I have tried also Xorg -configure but it say a warning message: "Server is running" I think that start up script dont read xorg.conf and the boot process is blocked
I installed Debian Squeeze from Debian 6.01 CD 1 on my old Pentium 4 Desktop. Now when I log off, the screen gets black and login window is not appearing. I have tried all old post of linux questions forum and also of ubuntu
View 7 Replies View Relatedi have an installation of wheezy 7.8 i think. i was facing difficulties in read of matroska video. therefore have decided to installer gstreamer1.0 wich should be resolve my problem. i have added the backports repository in apt sources list. after an apt-get update i launch apt-get install gstreamer1.0 . i have noticed it have starting downloading more file than it needs i concluded that it was a upgrade or something like because the kernel was also updated. after the the packet downloading it has started the installation with some errors related to LOCALE LCC. it has stopped and restarted some services wich is normal. i have closed all others apps and restarted. Here start the hell. after the restart i have passed the kde login screen and after BLACK SCREEN with mouse working.
Alt+F2 don't open the krunner
What i have tried? i have rename the /home/jefcolbi/.cache and back it again, rename /home/jefcolbi/.kde and back it again. next i have tried to check the Xorg config file. i created a new one with X -configure, modified it to feet my system configuration this does not resolve the problem but add another the keyboard is not working in graphical mode.
My system configuration:
Toshiba laptop Satellite Pro L300
Dual core
3gb Ram
graphic card:Mobile Intel(R) GMA 4500MHD
sound card: Intel HD Audio
debian whezzy 7.8 with KDE
Note: everything was working fine before trying to install gstreamer1.O from backports repository
I have a problem with my computer running debian testing with kde. When after a while I'm away form keyboard my screen turn off for power saving, but I cannot in any way turn it on again.
I tried moving mouse, pressing some key, Ctrl + Alt + Del, Ctrl + Alt + BackSpace, Ctrl + Alt + Esc, and also Ctrl+Alt+F1/2/ecc.. No way. I had to reset my computer every time.
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies View RelatedThe problem is black screen after resuming hibernation.After I switch my computer on (after hibernation), I can see some progress bar and (after loading to 100%) black screen appears.I have Debian + GNOME and I DON't have xscreensaver.
View 2 Replies View RelatedWas trying to play some new games, so was trying to install the ati drivers for my x15xx or something card.
anyway i am using ubuntu 10.10, so was having to try force them, using 9.10 config or something.
anyway got it installed, restarted and I get black screen have been trying to go back to "vesa" drivers or something. but been having no luck
I do not have a "/etc/X11/xorg.conf". and I cannot seam to make 1 using stuff like aticonifig --initial --input=/etc/X11/xorg.cong or anything like that
I am really stuck, even using dpkg-reconfigure or something didnt make the X11 conf
What I mean by black screen is that whenever I view a video or if there is video content anywhere on the page, my whole monitor goes black for around 3 seconds then plays the video content.
I am running Jessie 8.2 by the way.
Yesterday I done an upgrade with apt and since that time whenever I boot up I am presented with only a blank screen and an unresponsive cursor. I cannot switch console using Ctl+Alt+F*. The only thing I can do is Alt+SysRq+(R,E,I,S) which kills gdm3 and gets me back to the console.
* I can get into Xorg fine via the startx command
* As a temporary fix, if I enable automatic login (via /etc/gdm3/daemon.conf) then gdm3 works.
But I can't get the normal authenticated login screen to work.
Output of journalctl for a failed attempt at running gdm3 with verbose debugging enabled:
Code: Select allOct 25 01:24:43 [hostname-removed] systemd[1]: Starting GNOME Display Manager...
Oct 25 01:24:43 [hostname-removed] systemd[1]: Started GNOME Display Manager.
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Enabling debugging
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Changing user:group to Debian-gdm:Debian-gdm
Oct 25 01:24:43 [hostname-removed] gdm3[15863]: Successfully connected to D-Bus
[Code] ....
One other thing worth noting, before upgrading yesterday, I changed mirrors and accidentally pasted in "stable" into /etc/apt/sources.list. So basically I did an initial upgrade, realised my mistake, switched back to testing (which I was on before) and done another upgrade, which is when I noticed this problem.
After applying upgrades to debian 8.2 on a lenovo yoga3 notebook and a reboot I am not able to login into my GNOME desktop. The login screen stays black. If I press the power button to suspend I can see the login screen with default background for ~1 second before it turns black again. What can I do to fix this issue? Is there a way to login via terminal and do a rollback? Can I use my home folder an personal settings if i reinstall debian and keep the /home partition?
View 14 Replies View RelatedSo I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
I recently came to Debian. As I have an ati card, I tried the proprietary drivers first, but then came back to radeon (open-source). In the process, I think I may have broke my xorg.conf . Sometimes, when the monitor goes into sleep mode, when I came back, the screen remains black (sometimes I see just the cursor).
Here is my xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
Also, I have lots of backups in my X11 folder, like xorg.conf.fglrx-3, xorg.conf.original-1, or backup.xorg.conf. Is it safe to remove them? What should I do about the main xorg.conf?
I just updated to the new drivers. In my Xorg.0.log file, it doesn't show any errors. It just stop at a black screen. This might be a new bug with the binary drivers.
View 6 Replies View RelatedI'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
Pretty much what the title says.. a few more details:
- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)
I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).
I want connect from remmina to jessie on another system via xdmcp but only black screen happened.
my daemon.conf
Code: Select all[security]
DisallowTCP=false
[xdmcp]
Enable=true
[debug]
Enable = true
And gdm3 listen on udp/177. My syslog :
Code: Select allJul 16 10:17:46 office /usr/bin/dbus-launch[1455]: X Error of failed request: BadValue (integer parameter out of range for operation)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Major opcode of failed request: 140 (RANDR)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Minor opcode of failed request: 7 (RRSetScreenSize)
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Value in failed request: 0x0
Jul 16 10:17:46 office /usr/bin/dbus-launch[1455]: Serial number of failed request: 150
[Code] ....
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View RelatedSince doing a "full-upgrade" using the testing repositoriesotice that before an application can display its window, I get a frame with a black background for anything up to a second. I run a PC with 4 cores of 2.4 GH each.What could be the reason for this annoying behaviour?
View 5 Replies View RelatedOpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.
View 5 Replies View RelatedThis obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View Relatedi recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Related