I have a suspicion that this is easily fixed, however a good google (and this forum) hammering having turned up the fix. So I probably have the wrong search criteria, My Gnome Applet for switching CPU Frequency Scaling has 'disappeared' and is not listed in the the Add to Panel.. list of applets.
View 3 Replies
Trying to set my cpu to Powersave using the CPU Frequency Scaling applet. When I set it to powersave, it goes back to ondemand on its own. On the earlier versions of Ubuntu, I used to be able to set it from the main menu: system>powermanagement, but with 10.10, I don't get that option. Is there any way that I can set it to powersave permanently? I was also able to set it with Ubuntu Tweak, but it does not have that option either.
View 1 Replies View RelatedMy weather applet on the gnome panel disappeared and I cannot add it back i.e. when I go to "add to panel" and choose to add "Weather report" nothing happens.
View 6 Replies View RelatedI want to turn off frequency scaling permanently and totally in the lowest-level way possible. Is there a kernel command line that can be used or is recompiling the kernel without the governor stuff the only way?
Solved. Just modprobe -r and blacklist the acpi_cpufreq kernel module.
I'm having a weird problem (2.6.32-2-686-bigmem , sid):
Frequency scaling works on CPU 1 but not on CPU 0.
This is regardless of application, the Gnome applet and cpufreq-selector both fail
the nm-applet seems to have disappeared from the top panel, whenever I run the command it gives me the output:
Code:
** Message: applet now removed from the notification area
** (nm-applet:8695): DEBUG: old state indicates that this was not a disconnect 0
** (nm-applet:8695): DEBUG: old state indicates that this was not a disconnect 0
** (nm-applet:8695): DEBUG: old state indicates that this was not a disconnect 0
** Message: applet now embedded in the notification area
I have tried the --sm-disable parameter but that doesn't help ether
On my ASUS Eee 1000H with openSUSE 11.3 I'd like to be able to switch bluetooth on and off with the gnome bluetooth applet. However, when I run /usr/bin/bluetooth-applet as a normal user, the applet tells me:
Code:
** (bluetooth-applet:8598): WARNING **: Could not open RFKILL control device, please verify your installation
Okay, so it doesn't have write permissions on /dev/rfkill. When (as root) I change the permissions on /dev/rfkill from crw-r--r-- to crw-rw-rw-, the applet works as expected. Until the next reboot, when the permissions for rfkill are reset to crw-r--r--. How to make the permissions stick? Or if there is a better way to allow the applet to enable and disable the bluetooth adapter?
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
I am not entirely convinced that my CPU is actually changing frequency as it is meant to. It sometimes changes frequency, but most of the time it is stuck on 800MHz even when doing cpu intensive tasks. Here is information that may or may not be of help:
cat /proc/cpuinfo
processor: 0
vendor_id: GenuineIntel
[code]....
I notice here that it says between 800 and 800, but does that mean it is currently at 800, or can only be 800.
I often need to login into various accounts. In Debian 7 I always was able to copy and paste passwords from text files if I was asked for an input, but now the textfield for password input locks the whole system and I can't do anything else before I have supplied the password. Is there any way of restoring the old behaviour to make password input forms (like the request for GPG key passwords in Evolution) just being an addintional app-window instead of an input request, that locks everything else? I want to be able to open the proper file with the login data when prompted for it.
I know I could theoretically solve this issue by using a general system wide main key which would supply all individual login data, but I want to memorize some often needed phrases by actually typing them when I need them. I just want the possibility to open text files for copy and paste when I'm prompted for a password if this is something I don't even want to remember.
I have the CPU frequency scaling applet in the panel and it worked fine when I had 8.10 but now that I'm using Karmic, I cant get it to work correctly!
It won't change the speed to what I tell it to. I click on a different speed and it does nothing.
The CPU spins too slowly and videos lag or it spins at full speed and overheats even though I have nothing open! I really need to be able to adjust it.
I am new to ubuntu. I have just one question, everytime I reboot my laptop the CPU Frequency Scaling Monitor goes back to "On Demand." Why is that and can I also set it so it stays on Performance.
View 4 Replies View RelatedSlackware64 13.37 multilib, generic kernel (full install)
BIOS: EIST and C3/C6/C7 State support are enabled.
I'm trying to activate cpu frequency scaling following the tutorial on slackwiki: [url]
I can't load any module.
Code:
I've tried all of them but the error is the same. I also rebooted to the huge kernel, however, it gave me the same error.
I recently installed 10.04 and really like it so far, however I was wondering if it is possible to scale all hypertheading cores at once, currently I am using an applet for each and have to use several clicks to get into the desired powerstate.
I have read that with dual cores you will not have the option to go into different powerstates because it scales all cores at once, however the logical cores that show up with hyperthreading allow each to have a different power state, and will show up as different states if I use cpufreq-info in the terminal, so it seems like it is allowing it.
When I boot my machine (using a dual core 2ghz CPU) I always find myself out of "performance" mode (which I need), using only 1ghz per core.While this is easily fixable with "sudo cpufreq-set -g performance", I don't seem to be able to do it before having control of the machine. I would like to be able to boot with my CPU at full power.I would prefer to disable whatever is scaling down my CPUs to having to inject cpufreq-set to change governor. Anyone has any hint?I use default Ubuntu but I boot into a KDE4 desktop. But the same issue happens booting into the Gnome desktop.
View 9 Replies View RelatedIs there an easy way to take control of CPU frequency scaling in 11.04? There use to be an indicator applet but thats gone
View 2 Replies View RelatedFor some reason, it seems that 13.37 isn't loading the modules I need for cpu frequency scaling. I've edited /etc/rc.d/rc.modules so that CPUFREQ is set to on. On 13.1, this would mean the powernow-k8 module would be loaded for my AMD cpu, and the subsequent "ondemand" governor would be loaded. However, for some reason this isn't being done during the boot process. I've tried it using both the generic kernel and the huge kernel (I'd been using huge for a long time before without realizing it.) Has anything changed in 13.37 with regards to CPU frequency scaling?
View 5 Replies View RelatedI'm curious as to why some things are not happening at boot time (i end up having to manually load them).
In /etc/rc.d/rc.modules (near the bottom) i have set "CPUFREQ=on" and commented out any modules not specific to my hardware.
I have left this one uncommented:
Code:
And below the "### CPU frequency scaling policies:" i have;
Code:
uncommented. My scaling governor is set to:
Code:
Now whenever i reboot my machine `lsmod` is not showing any of either powernow-k8 or cpufreq* related modules.
I know i could use /etc/rc.d/rc.local with these:
Code:
But seems to defeat the purpose of rc.modules, any idea why they are not being loaded at boot... ?
Code:
With slackware64-current
would ask how to fix this warning that comes when i start my centos 5 virtual machine that run under windows 2003 std, previously it run smoothly with linux centos 5.
currently
Centos 5 Virtual Machine
____________________
VMware workstation 6 for windows
____________________________
Windows 2003 STD
previously
Centos 5 Virtual Machine
______________________
VMware workstation 6 for linux
___________________________
Linux Centos 5
I'm using Debian Stretch with Gnome and Cinnamon. My desktop computer sports an nvidia geforce 970 gpu (this may be relevant, and it is the reason I had to go with stretch.) I'm not a very experienced linux user but I get along fine.
I'm sharing my computer with my mom and whenever we have to switch users, the computer seems to shut down for 35 seconds: the screen doesn't receive signal anymore. After a new user is chosen, it takes another 35 seconds to get to her session. This is embarassing because my os runs on an ssd and everything else is nice and fast. At first I thought it may be a matter of us two not using the same window manager or not using the "default" window manager, but changing window managers didn't work.
Today I learned about the existence of /var/log/syslog and I decided to check what happened to it when I switched users. I can't post the whole log of what happens because it is too big, but I put it on pastebin : [URL] ....
I understand almost nothing of what is written here, but I saw some interesting things:
- after 35 seconds intervals where nothing is logged, there is a stall on cpu detected (lines 68, 500)
- my gpu seems to have something to do in all this
I'm running Debian Squeeze, and I have a gnome theme called "Moomex" installed. I have had it for a while and it has worked fine, until it suddenly stopped displaying menu scroll arrows (like for long bookmark menus in web browsers). I can still scroll, but in place of the arrows is a solid colored rectangle that clashes with my theme. I went searching and found my theme's arrow image files (see code below). I have no idea how these files are implemented into the theme display, so I don't know how to re-enable them. I tried reinstalling the theme, but it changed nothing. These arrows show up just fine in any other stock theme, and they were fine in this one too until they randomly disappeared.
View 3 Replies View RelatedIs there any possible way to keep my CPU frequency scaling on PERFORMANCE mode through a reboot? Ubuntu likes to default it back to ONDEMAND all the time.
View 5 Replies View RelatedI have recently installed Ubuntu 11.04 on my PC with these configuration:CPU: AMD Athlon 7750 Black EditionRAM: 2GB 1066 MHzVGA: ATI Radeon HD 3200 (on AMD 780G)After I installed Natty Narwhal I felt that my CPU runs at the highest clock all the time (2.7GHz), even if I don't have any program run. I tried all settings for AMD Cool'n'Quiet from mainboard BIOS, but nothing's changed. I installed "CPU Frequency Scaling Monitor" to manually change CPU clock. It recognizes two clock for my CPU, 2.7GHz and 1.35Ghz plus 4 other options; Conservative, Ondemand, Performance and Powersave but the CPU indicator doesn't change on every option!
View 9 Replies View RelatedLinux 2.6.34-12-desktop x86_64
Gnome desktop
I updated from v11.2. to v11.3.I have 4 workspaces defined. The Gnome panel shows only in the first workspace! When I switch to another one, the panel disappears. As you may imagine, this is rather inconvenient. Once I am in another workspace other than 1, my only option is to reboot since there is no way to navigate anywhere. How do I set up the Gnome panel to show in all workspaces?
I'd like to put an applet exactly in the middle of my Gnome Panel, I can't do it manually as the applet size varies so I need a way to put it in the middle always. The applet is dockbarX (a window list) so when I open or close a window the size of the applet changes and then it's not in the middle. Here you are an screenshot of what I'm talking about:[URL]..
View 9 Replies View RelatedI need to be pointed in the right direction on how to do this project. I simply want a gnome panel applet that will run constantly and, when clicked, will display an IM style list of I.P. addresses that are active on the network I am currently connected to. It should be able to have a configuration menu that will allow the user to specify a subnet mask, and frequency of scan. I am looking for something that will return something similar to the output of:
Code:
nmap -sP xxx.xxx.xxx.xxx-xxx
My question is: What language should I learn to make this happen, and is anyone willing to mentor me through the process?
I just bought asusn a50ij and of course I installed ubuntu, now I have few problems: when I try to add CPU frequency scaling monitor to panel it says: CPU frequency scaling unsupported Next problem:my cpu temp is 49 without any reason.and I cant see my graphic card temp,when I go to Harware Drivers I doesnt show any drivers at all,so I dunno whether its nvidia or raedon it doesnt say anything! Also I installed jupiter and each time I turn on my computer it goes to Maximum Performance how can I turn it off?
View 2 Replies View RelatedI'm experiencing a strange problem with GNOME Clock on Fedora 13. When the applet is in the bottom panel, and I click on the clock, the popup display appears at the top of the screen rather than at the bottom of the screen (above the bottom panel) as would be expected. Worse, the display appears higher than would be expected had the clock been on the top panel, meaning the display is cutoff (ie, the display goes off the top of the screen). I've tried playing with my .gconf files, and removing and re-adding the GNOME Clock applet, but nothing has worked. I'm not sure if this is a weird quirk particular to my settings, or a more general bug; can readers here check to see if the behavior I've described occurs if the Clock applet is added to the bottom panel?
View 8 Replies View RelatedI want the mail icon (indicator applet) in the panel to open thunderbird when I click mail, and when I click "new message" that tbird message opens. I've already got the notification going, and I have removed evolution.
View 1 Replies View RelatedThe CPU frequency scaling monitor won't stay at 800mhz after reboot or a certain period of time. My goal is to always have my dual core CPU locked at 800mhz to have it run cooler. I'm running Ubuntu 10.10 on my toshiba u300 laptop.
View 4 Replies View Related
