When I want copy a file to my Pendrive it take long time, How can I troubleshooting it? For example, It show me 13 seconds to finish but take 20 minutes to finish !!!
View 2 RepliesI made a fresh installation of Debian.
Code: Select all[VOSTRO200@root]#uname --all
Linux VOSTRO200 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
I changed to the kde desktop environment. I logged in as a normal user, and left the computer running for a few hours. when I came back the screen was turned off and the system does not respond to mouse movement, pressing the keyboard, or any combination thereof. I tried
Code: Select allCtr+Alt+F1,
CapsLock
First time i touched keyboard the led of numlock turned off, and never back. Blanking the screen itself does not cause a system crash, this occurs after several hours of inactivity.
.xsession-errors
Code: Select all/etc/gdm3/Xsession: Beginning session setup...
localuser:bartek being added to access control list
openConnection: connect: Nie ma takiego pliku ani katalogu
cannot connect to brltty at :0
Failed to connect to the VirtualBox kernel service
[Code] ....
When I log into an Xfce session, the splash screen indicates the "starting window manager" step with a busy cursor for about 10 seconds or more. Mind you this is a 2.8 GHz Core 2 Duo machine.I have tried logging out, mv-ing ~/.config/xfce4 from a tty console, and logging back in, but the problem persists.I am running Xfce 4.6.1.3 from squeeze.
View 14 Replies View RelatedWhen I am using some pendrives, I am unable to write (copy) anything into them and end up with some warnings like "read only mode". I tried to change its permissions using chmod also, but it is of no use.
View 1 Replies View RelatedI am using CentOS 5.3, kernal version is 2.6.18-164.el5 i cant copy things from my CentOS to any External pen drive. I tried from terminal also. but everytime the system is getting hanged leaving no option then to reboot.
View 11 Replies View RelatedI am using CentOS 5.3. output of "uname -a" Linux localhost.localdomain 2.6.18-92.el5 #1 SMP Tue Jun 10 18:49:47 EDT 2008 i686 i686 i386 GNU/Linux
My kernal version is kernel-2.6.18-92.el5
Whenver i try to copy files from my centos to pendrive ( 2gb, kingston datatraveller) my system is gettin hanged leaving no option then to reboot. i tried from the terminal also, and as a diffrent user also. but same results.
I am using CentOS 5.3. output of "uname -a" Linux localhost.localdomain 2.6.18-92.el5 #1 SMP Tue Jun 10 18:49:47 EDT 2008 i686 i686 i386 GNU/Linux
My kernal version is kernel-2.6.18-92.el5
Whenver i try to copy files from my centos to pendrive ( 2gb, kingston datatraveller) my system is gettin hanged leaving no option then to reboot. i tried from the terminal also, and as a diffrent user also. but same results. sometimes i can copy files of small size. but when i go above 5 mb..system hangs..
I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
The example can be viewed here:http://texasflyfishers.org/reports/i...ic,1461.0.htmlI am using this BBcode:
Code:
[img width=343 height=512]http://www.texasflyfishers.org/images/Emily.jpeg[/img]
HTML Code:
[code]....
I'm converting a movie that is .mkv to .avi and it's taking a long time. I'm using a command. Could it be that it's a movie and it's a 720p movie?
View 9 Replies View Relatedi got intel inside. when grabbing windows and moving them around they "streaked "(right word ?) over the monitor. Desktop-experience was simply "sluggish". I searched for all kind of info on this board. e.g.: installed preload, intel-microcode, set Xwrapperconfig to -1; -5, -10. tried some changes with swappines and cache_pressure in sysctl.conf. without knowing what it might be good for i ran prelink -a. For about a week it simply rocks: all is "sharp" and clean, including the move of windows. How come? does preload take such a long time ( a few months) to give such an amazing result? Is it related to graphics at all? I upgraded to ext4 bout 4 weeks ago (which takes a while too, from what i have read). intel-microcode doing magic? With the money i got chances are high that the pc`s i buy are intel-inside ones. and with a build-in graphics-card
View 14 Replies View Relatedwhile installation of debian 5 from small cd ... does configuring apt take a lot of time!!! installing debian for the first time.
View 1 Replies View Relatedafter i leave firefox on for some hours (the amount of time varies between a couple of hours to a day), when i try to use flash, for example in videos, it plays the first second of the video and then goes into a sound loop of that 1 second of sound that continues even after i stop the video. it takes about 30 seconds for it to stop. at other times, if i've left a video paused in the middle and start it again after some hours, it goes through the rest of the video in just a few seconds like it is in fast forward. the sound is messed up just like in the other case.
the problem clears up completely after i restart firefox. i have tried changing the flash plugins but this usually leads to other problems. right now i'm using the default plugin file name: libflashplayer.so shockwave flash 10.1 r102 i only had this problem in debian, its been going on for months now and i have absolutely no idea what causes it to happen. it seems completely random. when i have only two or three tabs open its a slight nuisance but restarting firefox with 50 tabs open just takes too long.
Since recently statd at the boot time takes, more then 30s or even more.
It is laptop configuration, no NFS server(?) lenny with few installs from backports (open office and .30 kernel - for Intel 5300) vmwware (7), as well firestarter firewall
Can I disable it or change the boot order (via sysv-rc-conf ), so I can speed up my boot time?
I downloaded Firefox and Thunderbird from the mozilla site and unpacked them and added the executables to the main menu. When I start either of them, the respective logo jumps up and down below the cursor for more than 10 seconds after the program has finished loading. Is there an easy fix to this small but annoying issue? I run Squeeze with KDE on a Thinkpad R61.
View 3 Replies View RelatedI have to copy and move files over two systems all the time. So when I am on system 1, I simply use the command
Code:
$scp * system2:/some_directory
There are many files in PWD of system1 with different extensions. Of all the files in the PWD on system1, I don't need a file called *residual.dat as it it particularly big and wastes a lot of time copying.How can I make a shortcut so that every time I do scp, it copies everything but the *residual.dat file?
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedIt takes me a while to log in the splash screen just sits there for ages before i get to the desktop. Never used to be this slow and I'm not sure why. Firstly, I'm running Ubuntu 11.04, standard DE. I do have conky starting up in a script but it has the & at the end of the line so I didn't think this would cause it (or is there some special case for log in time on how & is treated?). However as a test I will comment out the line in the script and see if it is the cause.
However just for general knowledge and in case that isn't the problem, how does one go seeing what is happening during the time from when one log's in and the desktop is displayed? Is there some kind of log that shows the date/time that can be enabled or is there a debug mode that can be enabled somehow via special keys or maybe from grub?
I have several audiobooks that are each split into many small chapters, and I would like to string together about ten of them at a time, so that I don't have 60 4-5 minute mp3 files per audiobook.If I were to do this all by hand, with audacity or something similar, it would get very tedious, so I'd like to know if there's already a program that would do it for me when told which files to string together.
View 2 Replies View Relatedi try to copy file to my pendrive it slow down the machine and when i try to open the other running application like browser it open slowly. My RAM is 2 gb. and Swap is 1.5 gb.
View 1 Replies View RelatedSo here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
Using redhat linux el5, when I had booted I had pbm repairing filesystem. So I run following commands
1. fsck -l
2. fsck
But I cannot solve the pbm. My pbm is I had important folder "backup" in root folder just I want to copy it in pendrive how to do it.
I get a SD card. Put in the SD reader. It's empty. I go to my super-important-pictures-to-a-monthly-relatory folder and select all files. Select them for MOVE. Paste them on the SD card. When the move/paste process is finished, i click on the "Eject" button on top of the SD card name. Card's ejected. I can't access the card anymore. I take out the card and put on my other computer. From 300 pictures, there are only 10 available, the remaining ones are there, but with 0bytes and unrecoveable. I panic. I go back to my main computer, my pictures are not there anymore. The pictures were on the Home folder. I panic again. I reset the computer and boot on the LiveCD. I install foremost, scalpel, photorec and about everything till my USB drive complains about being filled up. I run everything and I can't recover my files. I'm in the danger of getting fired. Things like that makes Windows sounds more appealing. When you securely remove a pendrive, things get REALLY pasted there before screwing everything up with a removal.
View 8 Replies View RelatedIm experiencing a long delay before the gdm login screen appears in debian jessie with kernel 4.4 and also with the distro kernel 3.16
there in the Xorg.log
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 22.516] X Protocol Version 11, Revision 0
[ 22.516] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
they claim to have fixed the issue after kernel 3.4 so i must have some missconfiguration causing this loop.
I deleted files from my camera (SDHC via USB) which I now want to copy back but I don't know how.
The camera is mounted in ~/.gvfs and the target folder is owned by my user with read/execute permissions. Couldn't change the folders permission.
I tried to mount the camera using 'gksu nautilus', but the camera didn't show up in the side panel. Unfortunately I don't know how to mount the camera from the command line, so I'm stuck.
PS: the only available card reader doesn't recognize SDHC cards, so that's not an option. And no, I won't boot Windows for that task.
Im not receiving any package updates since a month in my update manager.Is it the same for everybody?
View 9 Replies View RelatedI am using the 32bit version of ubuntu desktop 10.10. When I download a video on transmission and copy it to my 2gb iball pendrive the movie file doesn't show up on ps3. The file is compatible with my ps3 no question about that, it works fine when i re-downloaded it and copied the file to the same flashdrive using xp.
View 2 Replies View RelatedThe desktop stops working, the panel stops working.. but compositing, desktop cube etc all work fine.I can still launch a program with Alt-F2.When I try and kill it (to restart) using 'killall plasma' / 'kill -9 <pid> / 'kill -15 pid' from a terminal, nothing happens, the process keeps running. If I leave it for about 30 mins it suddenly dies, allowing me to run 'plasma' from a terminal - then everything is back to normal.
If I log out and try to log back in again, I get a black screen. Only way to fix it is either to kill it and wait for 30 mins or so, or totally reboot the computer.Tail of the xsessions error file:
Code:
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] CLuceneIndex::close in thread 3086616432[code]....
I am trying to install rhythmbox-0.13.1.tar.gz in my fedora 10 for a long time but i am in vain I downloaded it and i put it in my desktop.Then i did this:
# cd ~/Desktop
# tar -zxvf rhythmbox-0.13.1.tar.gz
Doing this a new folder named tar -zxvf rhythmbox-0.13.1 is created in my desktop.
then i did this:
# cd rhythmbox-0.13.1
[Code]...
I am using Fedora 15 KDE 32-bit. I am facing a problem while shutdown. It takes unusually long to shut down. It reaches the blue screen with the fedora logo within a few seconds, but it stays on the blue logo screen for 2-3 minutes before shutting down. However, I am facing no problems during startup.
About suspending F15 KDE. It goes into suspend successfully but after switching on after suspend, it just shows an unresponsive black screen.
Is anyone else facing the same problem and has it been solved before? Because I haven't come across many posts regarding F15 KDE.