Ubuntu :: After Log In Takes Long Time To Show Desktop, Monitor Events At Log In Time?
May 24, 2011
It takes me a while to log in the splash screen just sits there for ages before i get to the desktop. Never used to be this slow and I'm not sure why. Firstly, I'm running Ubuntu 11.04, standard DE. I do have conky starting up in a script but it has the & at the end of the line so I didn't think this would cause it (or is there some special case for log in time on how & is treated?). However as a test I will comment out the line in the script and see if it is the cause.
However just for general knowledge and in case that isn't the problem, how does one go seeing what is happening during the time from when one log's in and the desktop is displayed? Is there some kind of log that shows the date/time that can be enabled or is there a debug mode that can be enabled somehow via special keys or maybe from grub?
View 8 Replies
ADVERTISEMENT
Oct 13, 2009
I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
View 19 Replies
View Related
Jul 26, 2010
After I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.
View 9 Replies
View Related
Jul 25, 2010
I have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue
Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
[code]....
View 1 Replies
View Related
May 11, 2011
After upgrading to a 64-bit Ubuntu 11.04, I have found that it takes a lot longer to open any browsers such as Firefox, Google Chrome or Opera. Does anyone know why? I thought 64 bit Ubuntu should be faster than the 32 bit version. Nevertheless, I see no difference besides the browser problem mentioned above.
View 9 Replies
View Related
Feb 23, 2010
I'm having trouble with Vim in any terminal emulator I use. I have a link (vi) to vim. Occasionally it will take very long to load, whether I use 'vi' or 'vi file'. Before, if I could I would restart X, and then it would load instantly again, but I waited this time and it did load, after a minute or so. Is this a problem with X or vim?
View 9 Replies
View Related
May 6, 2010
I have a newly installed Kubuntu 10.04 running here, works fine except for one thing.
I have a kind of "fileserver" and it has a samba share that I have mounted in the home folder of my desktop computer ("/home/xxx/fileserver", the server is running an older version of Ubuntu, can't exactly remember what it is but the filesystem is ext2, if that's of any importance).
I have large files on the server, mostly video. When I use Dolphin (or Konqueror, doesn't make any difference) and right click one of these large files and choose Properties, it takes a LONG time to load the properties window. As if it copies the file to local hd before opening properties, or something.
The reason why I posted here and not in the networking section is, that I had the exact same setup with my previous installation which was Kubuntu 8.04, and also at least three different Ubuntu's before that. Never had this problem before, so I think my server and networking thingies are okay.
View 1 Replies
View Related
Jun 21, 2010
Firefox take so long more that 2 min when started and there is no internet is available (i.e. Ethernet cable is unplugged).
I think FF is looking for the connection. How can I make FF ignores this check.
I need this because sometime I am away from my networks and I need FF for local testing for web development.
I am using Ubuntu 10.4
View 7 Replies
View Related
Jan 5, 2010
I'm running Ubuntu 9.10 and Windows XP on my system. After installing Ubuntu, it boots normally about once, and then the next time I try to boot, I have to wait a few minutes with it saying "GRUB Loading." I have read other threads about this that say that it is clearly a GRUB2 problem, and something about Windows overwriting something with the MBR; although I haven't booted into windows once in the process of installing Ubuntu (multiple times) or afterward. GRUB version 1.97~beta4.
View 10 Replies
View Related
Mar 6, 2010
It takes an awfully long time to delete a file when deleting it though one of the KDE programs, like kdevelop or konqueror file manager.
Deleting files with rm works fine. I suspect it has to do with KDE recycling bin mechanics which I know nothing about. I am running fluxbox wm if that matters.
View 7 Replies
View Related
Aug 6, 2011
I currently have a Nexxt Lynx 150 Wireless USB adapter attatched to one of my home destops to recieve my wifi signal, however, i have run into a speed bump in terms of getting it connected to my ubuntu 11.04. This adapter works perfectly in windows and on the ubuntu live cd, but, when i install ubuntu to my hard drive and try to connect to my network,
it just takes a very long time, then says, disconnected. My signal is WPA2-Personal protected. Here is a link to the adapter's home page > [URL] It seems to me that this is a driver problem. The cd that my adapter came with has drivers for linux on it, but i havent the slightest clue how to use them.
View 9 Replies
View Related
Mar 25, 2010
Since recently statd at the boot time takes, more then 30s or even more.
It is laptop configuration, no NFS server(?) lenny with few installs from backports (open office and .30 kernel - for Intel 5300) vmwware (7), as well firestarter firewall
Can I disable it or change the boot order (via sysv-rc-conf ), so I can speed up my boot time?
View 2 Replies
View Related
Feb 6, 2010
When I log into an Xfce session, the splash screen indicates the "starting window manager" step with a busy cursor for about 10 seconds or more. Mind you this is a 2.8 GHz Core 2 Duo machine.I have tried logging out, mv-ing ~/.config/xfce4 from a tty console, and logging back in, but the problem persists.I am running Xfce 4.6.1.3 from squeeze.
View 14 Replies
View Related
Jun 16, 2011
The Fedora machine acts like print and file server.But the problem, its the conection time.When i start the machine with fedora, takes like five or more minutes to appear in "My network places" in the windows machines, and if the server dont appear, i cant print and browse in the server files with the windows machines.I can browse in the internal network files (Windows folders) from fedora all the time, i have internet conection and with the internal network all the time, but the server just dont appear in the network places in the windows machines when i just start the server.
I check the samba status when i start (in the terminal), and its running.And i have a control program called "Control of Ciber", this program connect with the "Slaves" terminals and the conection appear in the server, but when i just turn on the server, the machines appear offline, and they connect after the same time taken for the server to appear in "My network places" in windows.I dont know if have a relation, but i cant open the share folders of the fedora machine in the windows computers, a error dialog appear (Privileges problem), and i just cant see the files in the folder.I give administrator privileges to everyone in this particular shared folder (Chmod 775), and i put the "Security = share" in the samba file. This issues dont happen in debian or ubuntu with the same configuration
View 1 Replies
View Related
May 21, 2010
Now I use mutt to manage the mail list.
But when I start to mutt, it takes a long time (about 1~2 minutes) to
load all the mail list, about 20 thousands mail.
I don't know why it takes such a long time.
View 5 Replies
View Related
Jul 12, 2010
I recently broke down in the face of morbid curiosity and clicked that little version update button. it seems to run flawlessly (after i uninstalled the pesky touchpad) but it takes a long time to boot up now. at least a full minute. is this normal?
I will add also that it said my version of grub had been modified (which i dont remember doing, but may have) so i told it to leave the current one in place.
View 2 Replies
View Related
Nov 26, 2010
I have been using ubuntu for a while and i like it a lot, im a web developer and i have windows xp installed in virtual box, i moved completely to linux and just use windows to test in ie, it had been a while since i didnt use windows and i had to use in the last few days and noticed how much faster it is, the thing that bothered me the most is when opening folders in the desktop or the recycle bin, in windows its instant, in ubuntu opening a folder takes a long time to open nautilus, is this normal or is my installation bad, any comments are appreciated, i dont want to abandon ubuntu, i really like it but it really bothers me that nautilus is so slow to open.
View 9 Replies
View Related
Oct 21, 2010
OS: OpenSuse 11.2 64 bit
Machine: HP 8540p i5 4Gb
Shutting down my machine takes a very long time! Not convenient when one want to pack his laptop (I don't dare to when the fan is still blowing).
Upon shutdown, I press 'esc' and see what's happening. The last commands seem to hang. First, shutting down the network interfaces seem to last long than needed (eth0, pan0, wlan0). Sometimes, it stalls also on "networkmanager disconnecting from DBUS" (or something like this ) (which is the very last command executed). Hmm, I will write the exact command down.
View 1 Replies
View Related
May 9, 2010
While booting Linux it takes ages for 'enabling swap space'
I have allocated swap space twice that of the RAM.
Is there a way to fix it? What should I do to avoid this in the future installs?
View 9 Replies
View Related
Aug 19, 2009
I've setup vsftpd correctly and it's running fine with local users (in the same LAN). However, when remote users wanna login to the server, it takes more than 1 minute to get in. Users do can login from remote. It just took too long. (It prompted for the username and password very fast.) Since the server is behind a router, I did configure the port forwarding for TCP 20-21. The centos version is 5.3. The vsftpd is v2.0.5.
View 6 Replies
View Related
May 27, 2010
I am using KVM and created four guest Operating systems on it. The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment. One of our website is running on CentOS VM. Right now there is no traffic on the website static HTML pages. I do not have any clue as why it was taking longer time to be accessed.
View 17 Replies
View Related
Jul 8, 2011
My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies
View Related
Dec 1, 2009
I am useing a PC as a simple display and I need the monitor to stay on for long periods of time. I have set the power saving setting to "presentation" mode and it is not supposed to turning the monitor off. Is there somewhere else I need to adjust this??? I am running OpenSUSE 11.1.
View 7 Replies
View Related
Sep 25, 2009
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies
View Related
Jan 8, 2010
I have an unreasonably long time to wait from log in, to when my desktop is ready, it takes 40 seconds from hitting enter to seeing my files on the desktop, and about another 15 seconds from then to hearing the opening jingle. It used not to be this way, before it took less than 10 seconds, but about 4 days ago this time shot up suddenly, is there some way to diagnose whats causing this delay?
View 7 Replies
View Related
Jan 21, 2011
I'm trying to find out how to change the time at which daily events run per Anacron. Has anyone done that before?
View 1 Replies
View Related
Mar 13, 2010
I have noticed they sell digital writing tablets that have the ability to show the pen strokes both on the tablet's display and on the computer's monitor at the same time, and I think they are called LCD digital tablets and they serve as both a second computer monitor AND a writing tablet combined in one, such as the Wacom Cintiq, and must be connected both by USB as well as with a VGA/DVI port, and you have the ability to open up a drawing application directly from the tablet such as Paint where you can draw or write on the tablet's display. And you can see what you are writing on the tablet's display. Then you save the results to a JPEG file, for example.
But I do not want a digtal tablet quite as elaborate as that. I am looking for something similar to the credit card terminals used in stores where you can sign your name directly on the display after swiping your credit card, and you can see what you are writing as you write. Then your signature shows up on a paper receipt later. Do they make digital tablets like that for the home user, and if they do, would they have to hook up to the VGA/DVI port on your video card? What are they called and where can I get one?
I've searched several online stores but they do not say if you can see what you are writing on the tablet's display. I already have a Wacom tablet in Linux but you can not see what you are writing on the tablet. I have to keep looking up at my computer's monitor to see what I am writing and proficiency is reduced as a result. And again, I do not want a tablet as elaborate as I described in my first paragraph. I want something simplier, such as the type used at a credit card terminal.
View 2 Replies
View Related
May 26, 2010
I have installed Ubuntu 9.10 on my PC ie AMD Athlon x64 with 15 GB for (root) partition and 2 gb for Swap Space,with 1.2 GB of RAM,but after the successful installation its not displaying the GRUB immediately, taking 90-270 seconds to display? What might be the reason.? I have windows XP on my pc,even for booting into Win XP, one needs the GRUB display, its taking almost 90-180 Seconds to display the GRUB(sometimes more than that). But this thing never used to happen in previous versions of Ubuntu? Why only for this specific Ubuntu 9.10?
View 4 Replies
View Related
Jul 8, 2010
I am having a Ubuntu 10.04 server edition and I see a process plymouthd taking 95% of CPU what is that and how can I reduce it.
View 6 Replies
View Related
Jan 2, 2011
Im not receiving any package updates since a month in my update manager.Is it the same for everybody?
View 9 Replies
View Related
