Ubuntu :: Installed Debian In Pendrive Nd Lost Grub. No Grub If Pendrive Is Not Connected?
Mar 13, 2011
So here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
i have a similar problem , i installed ubuntu 10.04 onto a pendrive, it all works fine , but the catch is i have to keep my pen drive inserted to get the grub menu. is there a work around to get grub to work off my hdd( my guess is it is in my pen drive along with the ubuntu files)
I know this can be done with install-grub command in recent ubuntu release. How can i install it from puppy linux or distro which does not use grub 2. Will my pendrive boot if i copy /boot/grub from ubuntu 10.04 live cd to /boot/grub of my pendrive?
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait... Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
I want to know about grub. Let start with the explanation of grub. I am using Ubuntu 10.04. Yesterday when I installed widows7, I lost my grub. Every time I tried to install windows running on Ubuntu machine, the grub is lost. Why is it so? How can I restore it (for Ubuntu 10.04)? Can any advance setup be made while installing windows, so that the grub is not lost?
I created two debian bootable pendrive with the newest and basic commands: CP debian.iso and SYNC. When I tried to restoring the pendrive GPARTED sees only few space and is unable to perform any operation on the hidden partition as well in Windows 7.
CFDISK is able to see the partitions but is unable to write anything, just deleting. After deleted any partion GPARTED enconters a wrong block size so is unable to perform any changes.
Thus the only way I found to restoring the pendrive is delete the partion with CFDISK and then formatting the pendrive in Windows, where did I do wrong?
im using Debian (lenny) with 2.6.26 kernel, I'm trying to write udev rules in order to automount my usb pendrive, so I added this rules in udev:
SUBSYSTEM=="block", SUBSYSTEMS=="scsi",ATTRS{vendor}=="OTi ", ATTRS{model}=="Flash Disk ", NAME="penna128M",RUN="/usr/bin/ pmount /dev/penna128M"
I use pmount to install the device as normal user If i connect my device to the usb port I don't see nothing in /media/penna128M, BUT giving at the prompt cat /etc/mtab the last line is:
When I want copy a file to my Pendrive it take long time, How can I troubleshooting it? For example, It show me 13 seconds to finish but take 20 minutes to finish !!!
I have a 16 GB Sandisk Cruzer Blade USB drive. My aim is to create a portable LMDE operating system. Both for the challenge and to spread the word amongst my friends. Just today, I've converted another mate with an old Dell with stand alone LM9 LTS. On another thread, I recieved a lot of help trying to use GRUB with no real progress other than finding out that needed someone with a lot more knowledge.
viewtopic.php?f=46&t=64335 bear with me for the long description of what I have done so far. I'm trying to avoid us doing things twice. I have used Startup Disk Creator in LM9 to set up my usb. There is still a problem with persistence. Creator uses casper and syslinux to boot. In setup, it gives the option of persistence up to 4 GB file or discard.
The progress window indicates it creates a persistence file. Everything seems to go smoothly to completion and reboot. The boot-up avoids the usual live dvd menu and goes all the way to the live desktop with install Mint shortcut. Change the keyboard to USA Colemak with CapsLock an additional backspace. Reboot the PC, no remove drive and enter request on shutdown, and back to live desktop. No Persistence. Reboot. I go to users and groups and create my own user desktop. Logout of Mint and into my desktop. Change keyboard settings and go to reboot. It wouldn't let me. Needed a root password. Back to the forums to change that. More research tells me that the program creates a seperate ext2 partition labelled casper-rw to generate persistence. Some sites have called it casper.rw Run GParted. dev/sdd- Sandisk 16GB- has a single FAT32 Partition sdd1. No casper-rw ext2 partition. Amongst other things I created the casper-rw and casper.rw partitions to help it along. No effect. I removed the pendrive, and booted up normally. Re-inserted the pendrive to determine the included files.First level-
I wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have installed a 2.6.32-5-bigmem kernel on my Dell 790 computer since than the non of the USB devices are not recognized (keyboard , mouse , pendrive , etc ..). When running lspci the usb is listed as unknown device. When loading 2.6.26-2-bigmem kernel in the same computer the usb devices work fine.
Which is bit tricky (I learn slowly linux unfortunately due to low skills in informatics)
The cdrom debian installer to be put is located here, http://cdimage.debian.org/debian-cd/...86-netinst.iso
I tried unetbootin to make this pendrive, and it seems to be working, but not perfect. it hangs after the territory, saying that nothing into /cdrom is mounted.
Without unetbootin, how should we do to make a pendrive iso-cd/debian-503-i386-netinst-like bootable?
When I netinstall debian squeeze an asus netbook using using Unetbootin usb stick, at the end I am asked if I want to install grub on MBR. I agree, yes, but on booting I find that the netbook has not grub. I go back to usb stick that stole my grub and I use it to boot. I go to sunaptic and install grub, still nothing, the netbook won't boot without the usb stick.
Actually when I started format under ' FAT32 All Systems '.. it started and after some time it showed an error and close.. it pendrive unmouted automatically .. I tried with another USB port .. It didn't show up on desktop but there in my computer.. but its not opening there.. When I right clicked on it.. it not showing any options that a pendive icon usually shows like format..
Today I am facing strange issue with my USB. I can't format my pendrive. Doing all possible commands it showing that the pendrive is write protected it cannot be fomatted
I have tried fdisk,cfdisk,gparted,dd, rm * etc pendrive is transcend 8 gib but it showing 530gib of size
I have an 8gig mp3 player and I was wondering if it was possible to install Unbuntu on it, as if it were a bootable pen drive, without destroying it's ability to function as a stand alone mp3 player.
I'm using xubuntu 10.10 on usb, and i compile a new kernel but just i cannot access it. If I used harddisk instead of usb, simply, i can select my new kernel version in grub screen. However, there is no grub when booting from usb. So i cannot any selection.how can i reach the new kernel, when using xubuntu on usb?
I used to have Ubuntu 8.04 LTS on my old IBM Thinkpad R40e. I upgraded to 9.04 LTS and seem to have updated to the 10.04 LTS kernel - didn't know about that until now.
Recently I created an Ubuntu 10.10 Persistence Pendrive. I tried to readjust the booting sequence in order to boot from my USB stick Ubuntu 10.10. It somehow failed. - actually I know what to do in a BIOS
My computer still only boots via the harddisk - it does not boot via the Ubuntu-Pendrive nor does it boot if I insert an Ubuntu 10.10 CD. Further I cannot access my BIOS.
Is there any possibility to reset my BIOS manually - I know that some Dell computers have such an option? Any other way to update to Ubuntu 10.10.
While installing Ubuntu from USB (made with usb-creator), I began getting errors such as 'ubi-timezone has failed with exit code 1', with a retry / continue / cancel option, finally getting 'Installer has failed with exit code 1'
Now when I try to run Ubuntu directly from the USB key, it won't start properly, giving errors about zero drive space.
I'm now unable to continue the installation or even use Ubuntu from the USB!
How I can fix this? At least, how can I remove whatever has filled up the USB so I can run from it?
Just moved/reinstalled my HTPC setup (XBMC Live + extras) to a 8GB USB pendrive to simplify future reinstalls and upgrades. Everything works fine so far and I've not had any issues setting up everything for my needs. The system is very responsive in use in XBMC (and other) but slow down quite a bit occasionally when doing to much at the same time.
Since a USB pendrive have its limitations, a concern I have is regarding the swap partition that is currently on the pendrive. Should I move the swap to a swap partition on my HDD to ease the stress on the pendrive; and could I expect any gain in performance? I have 2GB of RAM.
I have a machine which i have to test with a live version of ubuntu 9.10. I used a usb pendrive for some time but it failed after rebooting a few times. Now i try to install a live version on a external HD of 160 GB. I installed the ubuntu 9.10 with unetbootin on the external HD. When I boot from the HD I get the error: NTLDR is Missing. Is it possible to install of load the ubuntu 9.10 version on a external HD. I found some stuff about
- using another USB stick with the live version and install from that USB to the external HD. - using the live cd to install. But I don't have a CD drive on the machine.
I found no feature to format my 4GB Corsair pendrive,since 11.3 KDE,but Ubuntu offer the complete feature to format a pendrive to either FAT,ext3 or ext4.How to get a pendrive format in openSUSE 11.4 KDE? And,I'll transfer the file between M$ windows & 11.4,which format is suitable?
I have a USB PenDrive (FAT32 file system) that has 2 boot options. Boot option 1 = runs a program that updates my BIOS. Boot option 2 = runs a program that executes a basic hardware test on the PC. I don't need to access any HDD or load any operative system. the pen drive is using a DOS bootstrap (like the one you obtain when you format a device using /s option under DOS).
Can I use an advanced graphical bootloader to accomplish the same thing? It would be nice to have a background bootsplash logo of the company, while the user selects one of the two boot options, using the cursor keys. Just like GRUB...
