I am trying to install rhythmbox-0.13.1.tar.gz in my fedora 10 for a long time but i am in vain I downloaded it and i put it in my desktop.Then i did this:
# cd ~/Desktop
# tar -zxvf rhythmbox-0.13.1.tar.gz
Doing this a new folder named tar -zxvf rhythmbox-0.13.1 is created in my desktop.
then i did this:
# cd rhythmbox-0.13.1
[Code]...
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedI am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
I'm attempting to install Kubuntu on a new laptop but seem to be having some strange issues. It's a Dell Latitude E5410 with 160GB HDD, 2GB RAM and Intel Core i5-520M(2.4GHz). I'm trying to install Kubuntu 10.10. When I restart the machine and boot from the CD for an initial install it seems to hang for a VERY long time. It will eventually get to the boot options (after hours) but seems sluggish. Once the install gets going everything seems decent except for that I can't seem to get it to finish. I know the CD is good since I used it to get Kubuntu on 2 desktops and another laptop in the last 48 hours. I've also burned another CD just to make sure. The checksum was spot on. Does anyone know what I can do to get this remedied?
View 1 Replies View RelatedThe desktop stops working, the panel stops working.. but compositing, desktop cube etc all work fine.I can still launch a program with Alt-F2.When I try and kill it (to restart) using 'killall plasma' / 'kill -9 <pid> / 'kill -15 pid' from a terminal, nothing happens, the process keeps running. If I leave it for about 30 mins it suddenly dies, allowing me to run 'plasma' from a terminal - then everything is back to normal.
If I log out and try to log back in again, I get a black screen. Only way to fix it is either to kill it and wait for 30 mins or so, or totally reboot the computer.Tail of the xsessions error file:
Code:
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] Removing connection
[/usr/bin/nepomukservicestub] CLuceneIndex::close in thread 3086616432[code]....
I am using Fedora 15 KDE 32-bit. I am facing a problem while shutdown. It takes unusually long to shut down. It reaches the blue screen with the fedora logo within a few seconds, but it stays on the blue logo screen for 2-3 minutes before shutting down. However, I am facing no problems during startup.
About suspending F15 KDE. It goes into suspend successfully but after switching on after suspend, it just shows an unresponsive black screen.
Is anyone else facing the same problem and has it been solved before? Because I haven't come across many posts regarding F15 KDE.
OS: OpenSuse 11.2 64 bit
Machine: HP 8540p i5 4Gb
Shutting down my machine takes a very long time! Not convenient when one want to pack his laptop (I don't dare to when the fan is still blowing).
Upon shutdown, I press 'esc' and see what's happening. The last commands seem to hang. First, shutting down the network interfaces seem to last long than needed (eth0, pan0, wlan0). Sometimes, it stalls also on "networkmanager disconnecting from DBUS" (or something like this ) (which is the very last command executed). Hmm, I will write the exact command down.
The Fedora machine acts like print and file server.But the problem, its the conection time.When i start the machine with fedora, takes like five or more minutes to appear in "My network places" in the windows machines, and if the server dont appear, i cant print and browse in the server files with the windows machines.I can browse in the internal network files (Windows folders) from fedora all the time, i have internet conection and with the internal network all the time, but the server just dont appear in the network places in the windows machines when i just start the server.
I check the samba status when i start (in the terminal), and its running.And i have a control program called "Control of Ciber", this program connect with the "Slaves" terminals and the conection appear in the server, but when i just turn on the server, the machines appear offline, and they connect after the same time taken for the server to appear in "My network places" in windows.I dont know if have a relation, but i cant open the share folders of the fedora machine in the windows computers, a error dialog appear (Privileges problem), and i just cant see the files in the folder.I give administrator privileges to everyone in this particular shared folder (Chmod 775), and i put the "Security = share" in the samba file. This issues dont happen in debian or ubuntu with the same configuration
It takes me a while to log in the splash screen just sits there for ages before i get to the desktop. Never used to be this slow and I'm not sure why. Firstly, I'm running Ubuntu 11.04, standard DE. I do have conky starting up in a script but it has the & at the end of the line so I didn't think this would cause it (or is there some special case for log in time on how & is treated?). However as a test I will comment out the line in the script and see if it is the cause.
However just for general knowledge and in case that isn't the problem, how does one go seeing what is happening during the time from when one log's in and the desktop is displayed? Is there some kind of log that shows the date/time that can be enabled or is there a debug mode that can be enabled somehow via special keys or maybe from grub?
After installation of Fedora 11, I click reboot, it ejects out the disk, but is stuck at the screen for a long time and doesn't reboot so I manually had to reboot it. Today, surfing on firefox, it got frozen, and the touchpad worked, but everything was frozen nothing moved so I had to manually shut the laptop down. On bootup everything was ok. Im worried about corrupted files.Should I just reinstall Fedora 11? m using a dell studio 1555 laptop
View 4 Replies View RelatedI installed Fedora 15 last week, on my main PC, and I absolutely love it. Defintely my favourite operating system. Now I have a few questions. I thought I would put them all in one thread, instead of making seperate ones. I did search before I posted, and I cant seem to find any solution to my problems. So here it goes.
First question, I am using evolution for my e-mail program/client. My email addresses are all hosted by hotmail. Now I have set them all up correctly, but cant seem to send e-mails(I recieve them perfectly fine). I am using the "smtp.live.com" server, and using SSL encryption. I have tried messing with the settings but have had no luck. Has anyone figured out how to fix this?
Second question, I play minecraft frequently, and I am currently starting the program via terminal [java -jar /home/username/minecraft.jar], which works flawlessly. However it is too slow(open terminal, type it in. I need a simple click), is there any other way to start minecraft?
Third and last question, What is the best way to close minecraft? I notice if I just close it(via right click, and close, or clicking the X) it freezes and stays open for a long time. Is there any better way to close it?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedIm not receiving any package updates since a month in my update manager.Is it the same for everybody?
View 9 Replies View Relatedin ubuntu 10.04 After logging in t All I had was the wallpaper & my widgets for around a minute, and then the usual upper and lower panels appeared.. didnt had this problem in 9.10
View 4 Replies View RelatedAfter I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.
View 9 Replies View RelatedMy machine is taking ages to get from the login screen after booting to actually showing the gnome desktop (as in, over a minute). The bootchart is at golg-lucid-20101111-1.png
View 1 Replies View RelatedI'm having trouble with Vim in any terminal emulator I use. I have a link (vi) to vim. Occasionally it will take very long to load, whether I use 'vi' or 'vi file'. Before, if I could I would restart X, and then it would load instantly again, but I waited this time and it did load, after a minute or so. Is this a problem with X or vim?
View 9 Replies View RelatedLDAP Server => CentOS 5.5 Configured according to this link [url]
LDAP Client => Fedora 14 Configured according to this link [url]
Now after I reboot the Fedora14 during startup, it takes very very long time to start up the mdmonitor service.
After that when I log on using a local account in the Fedora14 machine, it takes painfully long time to log on. And it does not identify the domain user.
I can able to log on to the ldap server through ssh from the Fedora machine.
I issued the command 'getent passwd' which does not fetch the domain users either. I am completely lost now.
i got intel inside. when grabbing windows and moving them around they "streaked "(right word ?) over the monitor. Desktop-experience was simply "sluggish". I searched for all kind of info on this board. e.g.: installed preload, intel-microcode, set Xwrapperconfig to -1; -5, -10. tried some changes with swappines and cache_pressure in sysctl.conf. without knowing what it might be good for i ran prelink -a. For about a week it simply rocks: all is "sharp" and clean, including the move of windows. How come? does preload take such a long time ( a few months) to give such an amazing result? Is it related to graphics at all? I upgraded to ext4 bout 4 weeks ago (which takes a while too, from what i have read). intel-microcode doing magic? With the money i got chances are high that the pc`s i buy are intel-inside ones. and with a build-in graphics-card
View 14 Replies View Relatedwhile installation of debian 5 from small cd ... does configuring apt take a lot of time!!! installing debian for the first time.
View 1 Replies View Relatedafter i leave firefox on for some hours (the amount of time varies between a couple of hours to a day), when i try to use flash, for example in videos, it plays the first second of the video and then goes into a sound loop of that 1 second of sound that continues even after i stop the video. it takes about 30 seconds for it to stop. at other times, if i've left a video paused in the middle and start it again after some hours, it goes through the rest of the video in just a few seconds like it is in fast forward. the sound is messed up just like in the other case.
the problem clears up completely after i restart firefox. i have tried changing the flash plugins but this usually leads to other problems. right now i'm using the default plugin file name: libflashplayer.so shockwave flash 10.1 r102 i only had this problem in debian, its been going on for months now and i have absolutely no idea what causes it to happen. it seems completely random. when i have only two or three tabs open its a slight nuisance but restarting firefox with 50 tabs open just takes too long.
I am useing a PC as a simple display and I need the monitor to stay on for long periods of time. I have set the power saving setting to "presentation" mode and it is not supposed to turning the monitor off. Is there somewhere else I need to adjust this??? I am running OpenSUSE 11.1.
View 7 Replies View RelatedI am changing the password of a truecrypt file container. This takes around 1 minute. Why?
time truecrypt --text --change /tmp/user1.tc --keyfiles= --new-keyfiles= --password=known --new-password=known --random-source=/dev/null"
If I use strace I see that it basically does not do anything: it simply reads lots of random data from /dev/urandom (even if i specified /dev/null as random source) and finally changes the password:
open("/dev/urandom", O_RDONLY) = 6
read(6, "36&{35121221234320234313242312I326235245224300354O)270Q200 201J227224311_212367"..., 640) = 640
close(6) = 0
I have been using Karmic as a tool to extract important data from Windows Operating Systems where say viruses have necessitated a complete reinstall. I run the Karmic install disk and use the 'try before installing'option. It works well and I am able to 'rescue' anything I want by saving to a USB drive.Problem is that Karmic does take a relatively long time to load on a 'slow' PC.Does anyone have any suggestions on a 'slimmed down' Ubuntu that could be used in the same way which will load up quickly ?In most circumstances all I want to do is mount the C Drive of the stuffed PC and copy files to an external USB drive.
View 5 Replies View RelatedI have just made a clean install of Ubuntu 9.10 and after installing all updates, GDM is taking a long time (about one minute) to come up after a clean boot, resulting in a regular console prompt.
If I issue "sudo service gdm start" it does come up promptly.
What can I do? Where can I see startup logs to try and identify any problems?
My PC is a Core2Duo7400/4gbRAM/9600GT. I install Enlightenment e17 on Ubuntu 10.04. It works perfect and runs very fast, but I have a little problem. When I open any browser (Firefox, Chrome, Opera) and a right would click -> save image takes a long time to open the box. I've noticed that happens only once, at first. if I open nautilus, it is the same, it takes quite at first, but only once. I think it is being loaded "some" of gnome and I want to load on boot.
View 4 Replies View RelatedI have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue
Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
[code]....
The example can be viewed here:http://texasflyfishers.org/reports/i...ic,1461.0.htmlI am using this BBcode:
Code:
[img width=343 height=512]http://www.texasflyfishers.org/images/Emily.jpeg[/img]
HTML Code:
[code]....
I compressed a directory containing many image files. The directory amounted to 5.3gig. Compressed with TAR using .tgz the compression took a couple minutes at most and compressed down to 4.3 gig. Compressed using .bz2 the compression took about 90 minutes and compressed down to 4.2 gig. Hardly worth the extra time. Do these numbers look normal to you?
View 1 Replies View RelatedI don't know if it is just me but it seems like Ubuntu takes a long time to start up programs. For example, it takes me 10 seconds to start up "Ubuntu software center". My computer is a relatively fast one. It has 4 gb of ram and an intel core duo processor. I didn't install that many programs. Does anyone know what might be the source of the problem and how to fix it?
View 6 Replies View Related