Debian :: Monitor Info In System Settings -> Displays
Jan 18, 2016
I am running Wheezy 7.9 and recently created a file, in xorg.conf.d, to set the monitor configuration because the EDID is not always read from the monitor. Everything works great but when the EDID is not read the monitor name, as shown in System Settings>Displays, shows as Unknown. I have the vendor info and modelname in the config file but they do not show in the Display GUI. Is there some variable that I can set in order to get a good monitor name displayed?
Probably should include some more information. I am using the Gnome Classic desktop and gdm manager. Here is the monitor conf file that I put in /etc/X11/xorg,conf.d
I remember screenshots in which a cli window is opened and in it kernel version, processor type, and other information is displayed along witnice little ascii art of the distribution logo. I have seen it for gentoo and debian, but forget the name.
When I say info, I get an empty document: nfo: (dir)Top, 1 linii --AllWhen I say info -f /usr/share/info/dir, I get the same.When I open /usr/share/info/dir in KWrite, I notice that there are tabulations in the Node: declaration.When I removed these tabulations, the directory suddenly displayed all right (info -f /tmp/dir).So I tried the same thing with the file extracted from the current package, and it contains tabulation characters, so I can see nothing there with info.
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
I've seen some desktop screengrabs which have included a transparent graphic (usually in the upper right corner of the screen) that displays current system information such as the hostname, kernel revision, CPU utilization, etc., that is constantly updated.Is that something that is available from Debian? I would like to install it to check it out, if it's available.
I have 2 monitors my main one working fine, my second one plugged in a usb to VGA adapter displays a purple screen with ubuntu on it and 5 dots but does not go any further than that. In display settings it can not find my second monitor either. Any way to get Ventrilo client on ubuntu. I am using Ubuntu 10.10.
Booted up my machine today and when I started x windows, the first dialog box came up fine and then the gui components turn into garbage characters and I then I lose control of the gui and have to reboot.I'm running Centos 5.5.I'm wondering how to diagnose this. Is this a hardware problem of a configurationproblem? Is there a way I can set the video settings back to default values?
Happens on Jessie AMD64 with mate, I can't go to a tty to kill mate system monitor, mouse stop working, keyboard stop working. I tried changing the theme, and now it freeze opening mate system monitor.
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
Every time i click 'System Settings', it says that it is Starting, but nothing else happens after that. I can access 'Advanced Settings', but not 'System settings'. A
I have a user who has recently switched to Debian 7 (from Windows). While reinstalling his PC I foolisly went straight to install the ATi proprietry drivers (as every computer I have come across this in this building is running with an ATi card). Once install I found out that the computer actually had on board Intel Haswell graphics. So I installed the correct driver and uninstalled the ATi one. Since then System Settings refuse to open they are forever "Starting". The user is running on Gnome Classic as Gnome 3 refuses to start (in what I am starting to suspect is a linked issue).
Running "gnome-control-center" from the command line details the following error:
(gnome-control-center:4583): Gdk-WARNING **: The program 'gnome-control-center' received an X Window System error.
This probably reflects a bug in the program.
The error was 'GLXBadContext'.
(Details: serial 158 error_code 171 request_code 154 minor_code 6)
(Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
Just completed setting up dual monitors on my computer, it's a dual boot Debian with Squeeze on disk one and Sid on disk two. My problem is that everything is working properly on Squeeze, but any changes I make to system settings in Sid setting up my second monitor are not being accepted. I'm at a point where I have redone everything twice and with no effect, can some one point me to some effective documentation or something I can use to correct this condition.
I am not sure where to post that so I'll just try here.My main question is: How can I prevent the system from changing my cpufreq settings? I'd like to keep the CPU load as low as possible so these settings are probably the best.However when I run some applications that require a higher CPU load the system changes the governor to performance and the rang to 0.8 - 2.4 GHz.And that's my problem. I neither know what application exactly is responsible for changing my cpufreq settings nor do I know how to turn that off.Or is it supposed to be that way?
I used the Debian Lenny (main, not testing) update manager yesterday to install some new updates. Took a few minutes and no problems but today I started up and for some reason my system wouldn`t load.The hard drive installer automatically sets hd1,0 as my Debian system when it`s 0,0. I had changed this but upon updating yesterday the system again has grub using the previous setting.
Is there any logical reason why a system update (not upgrade, just small update via update manager using only main files not testing or volatile nor backports) could or would change my grub settings back to the wrong ones? I haven`t installed anything else, the only change has been the standard system update so it can only be that which caused it, but why?
I need to play a info movie on a monitor through VGA. When done, then re-start the movie and continue to run it, forever. How do i do this? If I install a ubuntu 10.04 server, or a very stripped down ubuntu version (i dont know one) then how do I setup VLC to do what I want it to? All I can find is stuff about streaming over a network, and nothing on how to stream (local) over vga.
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
I am new to Debian and Linux all together. At work, we have dual even triple minitors at our stations. I have not seen this on linux until I went to a co-workers house. I wanted to do the same and I have two monitors. I asked how but he uses X on Gentoo.How can I go about learning how to do this? I can tell you now, I DO NOT know how to get the monitor information on the system. I DO NOT know where to find the configuration files for my monitor.
I know I am going to need drivers and stuff. What I asking I guess is where I should start in order to get this going. I am running Debian (lenny) 4 GIGS ram, 1.5TB HDD and a Dual core processor. I know the video card I have is a dual head video card for two monitors. I would like to thank everyone in advanced for their and hopefully I can learn something new and be able to do this on my own in the future.
I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:
I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
Before I had Fedora, but only cuz all the devices were recognized by default, for a while now I wanted to switch over to Debian but as I came to relize my hardware for some reason is not working.
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
I am trying to view my pc on my new flat screen but am unsure of the settings. I am using ubuntu 10.10. I have been trying (and on ocassion succesfully, but never really understood what I have done) to view my pc through the monitor option under preferences. Selecting the different monitor size but always find my external monitor (ie TV) is to the left, right above or under the screen I see on my PC. Also I am unable to hear my PC through the TV. I should say this is a good quality flat screen and all I am unsure of are the correct settings to use my TV as an external monitor.
