OpenSUSE Hardware :: Both Monitor Displays Coming Through On Single Monitor?
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
ADVERTISEMENT
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Dec 10, 2010
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies
View Related
Sep 7, 2011
I have a really strange X (?) problem. My physical setup is:
Dell Optiplex 990
VisionTek 210 nV DMS59 PCIe video card (with a DVI splitter)
dual Dell P2411H monitors
I'm running OpenSuSE 11.4 (x86_64 fully patched) with the current nvidia drivers and kernel module. I'm running KDE and kdm in case that matters.
If I power off the two monitors, and then power them on again, the right monitor will come back on. The left monitor (which is the primary one... it's the one where the login screen appears when you are first logging in) reports that it is in power save mode. Wiggling the mouse, typing, etc., do not wake it up. The only thing that wakes it up is the detach the DVI cable from the monitor and reattach it (and sometimes it takes a couple tries).
I have used two (identical) video cards and splitters, and the problem occurred with both, so the problem doesn't appear to be with either of them. I also swapped monitors, but after the swap, the problem still occurred on the left monitor, and the old left monitor (which was now right) came on fine, so it doesn't appear to be a monitor problem.
I'm baffled. For now, I just won't turn off the monitors (or at least not the left monitor).
View 3 Replies
View Related
Jul 31, 2010
After some updates system doesnt login.In the monitor displays out of frequency.
View 2 Replies
View Related
Dec 4, 2010
I have 2 monitors my main one working fine, my second one plugged in a usb to VGA adapter displays a purple screen with ubuntu on it and 5 dots but does not go any further than that. In display settings it can not find my second monitor either. Any way to get Ventrilo client on ubuntu. I am using Ubuntu 10.10.
View 3 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 18, 2016
I am running Wheezy 7.9 and recently created a file, in xorg.conf.d, to set the monitor configuration because the EDID is not always read from the monitor. Everything works great but when the EDID is not read the monitor name, as shown in System Settings>Displays, shows as Unknown. I have the vendor info and modelname in the config file but they do not show in the Display GUI. Is there some variable that I can set in order to get a good monitor name displayed?
Probably should include some more information. I am using the Gnome Classic desktop and gdm manager. Here is the monitor conf file that I put in /etc/X11/xorg,conf.d
Code: Select allSection "Monitor"
Identifier "Monitor0"
VendorName "VSC"
ModelName "VA912b"
DisplaySize 376 301
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
[Code] ....
View 2 Replies
View Related
Apr 20, 2011
Booted up my machine today and when I started x windows, the first dialog box came up fine and then the gui components turn into garbage characters and I then I lose control of the gui and have to reboot.I'm running Centos 5.5.I'm wondering how to diagnose this. Is this a hardware problem of a configurationproblem? Is there a way I can set the video settings back to default values?
View 1 Replies
View Related
Jul 13, 2011
I have just "finished" updating my Ubuntu 9.10. (somehow I knew that something is going to go wrong), and now my PC starts, works fine for a few seconds, then I get a black screen for a moment, and then my monitor starts acting like PC is off.Interestingly I think that otherwise everything is working just fine and that I just can't see anything due to the black screen (monitor is flashing like there is no signal coming from PC).
View 3 Replies
View Related
Mar 24, 2011
i have uninstalled and reinstalled alsa and made sure its not muted, in pulse audio it displays sound is coming out when i play a song, but no sound is actually coming out.. i dont want to go back to windows, but if i cant get sound im going to have to
View 1 Replies
View Related
Jan 28, 2011
I recently hooked my television up to my computer as a second monitor so that I can watch videos on it. However, I don't always want to be in dual monitor mode. I've found that running "gksudo nvidia-settings" allows me to switch between the two modes without restarting X if I change some settings around and click "apply".
Is there a way I could setup two scripts to handle this process? The main problem I'm encountering is the fact that I change all the settings through the nvidia-settings graphical interface; therefore, I have no idea what's actually happening behind the scenes, so I don't know how to go about putting the two scripts together (what commands to issue, etc.).
View 7 Replies
View Related
May 27, 2010
I am attempting to get a Dual Monitor Display using aticonfig (and/or manual editing my xorg.conf file). My graphics card (a Radeon HD 4350 with latest ati drivers ) has only a single output but I am using a splitter cable to connect it to two monitors.
I am want one monitor to be 1600x1200 and the second monitor to be 800x600.
This is the command I had tried to no avail.
aticonfig -fq --initial --dtop=horizontal,reverse --resolution=0,1600x1200,1280x1024,1024x768 --mode2=800x600
What am I missing? Should I be using this configuration utility? Or should I be trying to manual edit my xorg.config? All the information I have been able to find seems specific to Dual Head Displays.
EDIT: It occurs to me to post my edited xorg.conf file
Quote:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
[Code].....
View 2 Replies
View Related
Feb 23, 2010
I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
View 12 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Aug 11, 2011
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Mar 20, 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Apr 20, 2010
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies
View Related
Jun 29, 2010
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
View 1 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
Sep 25, 2010
I have the 'Camera Monitor' installed, which works fine and notifies me if my webcam becomes activated.Is there a similar desktop program to monitor the microphone, that can notify me if the microphone becomes active?
View 2 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
Jul 31, 2010
I've been having issues where I am running out of video memory on my ATI Mobility Radeon 5470 (latest Catalyst), and I would like to be able to examine what is going on with it.How can I monitor my video memory like how I can monitor my CPU and RAM with top or system monitor?
View 2 Replies
View Related
