I need to play a info movie on a monitor through VGA. When done, then re-start the movie and continue to run it, forever. How do i do this? If I install a ubuntu 10.04 server, or a very stripped down ubuntu version (i dont know one) then how do I setup VLC to do what I want it to? All I can find is stuff about streaming over a network, and nothing on how to stream (local) over vga.
View 9 RepliesI recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
Anyone know a working movie player? I can't use Movie Player to play my movie because it's talking about plugin BS. Now I try loading the disc with VLC media Player and the crap just closes out.
View 6 Replies View RelatedEvery time I use Movie Pllayer to play DVD movie, it just hang on there and not responding,so I must click the 'Force Quit' button to close it.What should I do to overcome this problem? Is there any other software which can play DVD movie?
View 2 Replies View RelatedRecent FC10 totally clean install. Fully updated using yum.
Using gui /system/administration/network I set up my DNS to the two IP addresses I've been given.
$service network restart
cat /etc/resolv.conf and the secondary DNS has changed to the IP address of my
gateway (router, at 192.168.2.x)
I.e. something is overwriting resolv.conf
Prior to this install, I'd been successfully using fixed IP on the 192.168.2.x range quite happily. Now it only works on DHCP and DNS seems to take an age.
I cannot play a dvd in Movie player, or VLC. I get gstreamer plugin error in movie player, and all kinds of errors in VLC. I tried to do this [URL]
View 6 Replies View RelatedWhy won't movie player play my DVD it is DVD9 format and works on my DVD player. (I have ubuntu restricted extras installed)
View 7 Replies View RelatedI've just updated to 10.04 and found out that I can't play original DVDs. Movie Player gives me error message "Could not read from resource" and VLC just ignores all attempts to play the DVD.
View 9 Replies View RelatedIm trying to play a DVD Movie on Ubuntu 10.10 using VLC Player.
I get this on dmesg.
Tried playing with Totem Movie Player 2.32.0, it cannot find a suitable plugin.
"The requested plugins are: DVD source".
I am trying to set nvidia x screen to play movie on tv via s-video. When switched to tv screen is white in twinview, I can move x server settings window but that is all. In separate x screen monitor goes black, tv does not change. Also have installed Nvtv tv out. I have GeForce4 MX420
Found this article [URL]
Terminal results
craig@craig-desktop:~$ sudo /etc/X11/xorg.conf
[sudo] password for craig:
sudo: /etc/X11/xorg.conf: command not found
[Code]....
I am currently trying to play a VC-1 encoded MKV-file under Linux (Ubuntu 10 / latest Mint, both are affected), but VLC reports that it isn't able to decode WVC-1. VLC is able to play this file under Fedora 13, OS X and Windows, while both mplayer and ffplay are able to play this movie under Ubuntu 10 and Linux Mint.
I made two log files that where previously posted on the VLC forum, where I was told that it looks like there is a problem with the avcodec. I have basic experience with compiling stuff, but my knowledge of C++ and the linux internals is close to null. Which packages do I need to build from source in order recreate avcodec and its dpendendcies?
Link to error log running Ubuntu 10 and latest "Linux Mint" (reinstalled multiple times):[url]
Link to log running Fedora13 (works, but I prefer debian based linux):[url]
And last but not least a link to my thread on the VLC board:[url]
When I put a DVD in my PC (any DVD), it recognizes the DVD and even tells me the title of the movie (for example, it knows that I put Cat People in the DVD drive). But then it gives an error message, "An error occurred. Could not read from resource." I have Ubuntu 9.10 on a HP Pavilion ZE4900 laptop.
View 2 Replies View RelatedWhen I insert a movie DVD into the drive, the disk is read, a window pops up asking what software do I want to use (Open Movie Player is the default). I click use Open Movie Player and get "An error occurred could not read from resource" dialog - and the movie does not play.The file manager reads the disk without any problem, so don't think it's a bad disk (and it plays in my WinXP machine). I checked in Synaptic and it appears that Totem and all the stuff that needs to be installed with Totem is there. Is there another player or some front end for totem that I don't have? In that initial screen asking for software choice, totem is not an optio n.I've looked around in Medibuntu and it looks like all the needed files are already installed. Is there a different DVD player that needs to be installed?
View 9 Replies View RelatedThis may be a stupid question, but with Movie Player, how do I play a video_ts video? In VLC under media it has the option to open a directory, which is self explanatory that the video_ts option falls under. What about Movie Player?
View 9 Replies View RelatedI'm running to 11.04 and I can't seem to get the file to play sound. I've tried others and none seem to work. I've tried downloading all sorts of codecs but either not the right ones or just not doing something right...
View 3 Replies View RelatedI'm hoping someone may be able to help me; I have done a complete new install of Mythbuntu 11.04 on an IBM T400, only OS on a formatted drive.
I have not changed any settings on the Backend, only loaded a few Music, Photos & Videos to the /var/lib/mythtv/music & pictures & video directories.
Photos & music functionality is 100%
The problem I'm having is with the "Watch Video" option; the test videos I have loaded to /var/lib/mythtv/videos directory, show up in the Watch Video section, all the information on each movie is displayed (looks great), it gives me the option to "Play" the video, but when I select play, nothing happens.
If I close the "Frontend" and open the same movies with VLC the work perfectly
I'm using Ubuntu 11.04 64bit. I just bought the Zotac Geforce GT 430. I downloaded and installed the driver NVIDIA-Linux-x86_64-275.21.run. (from nvidia.com)
Everything seems alright except that I can only see black video when I play any kind of movie (avi, mkv, mov, ..) while the sound is still playing.
Previously, I could watch any movie well with the onboard graphic card. My mainboard is Gigabyte GA-H55M-S2V.
I use Fedora 12 AMD64 , and my daughter use it . and I have tom and jerry in my computer , I like my daughter only use game and learn many thing about computer , but she always see Tom and Jerry and waste time . Can I do something my daughtery see movie in evening .with VLC or mplayer or Script ?I want Fedora do not let him see movie in evening and let him see movie in morning ?I want Fedora disable use VLC or Mplayer in evening and enable it morning .---------- Post added at 06:22 PM CDT ---------- Previous post was at 11:45 AM CDT ----------
View 5 Replies View RelatedMy Movie Player in F13 cannot play .dat files. Any way to add some codecs to enable it to play .dat files?
View 1 Replies View RelatedThis is my second day of using Linux Mint and I have bunch of questions. Let's start with this one. I tried to play dvd movie yesterday night. I put disc in drive. And nothing happened. Like it's not in there. So I tried to double click (I'm old Windows user trying to learn new stuff) on cd/dvd disc in computer. It's unresponsive. I try right click run with application some kind of movie player. It says 'Could not open location. You might not have permission to open the file'.So I installed VLC and did the same thing but same message appears.So I look at google for the answer and didn't find much. And I was tired and went to sleep.
Today I wake up, turn on my laptop and surprise, surprise! There is some icon on my desktop saying 'Name of the show' (that was the dvd I was trying to open). So I double click it and there are all episodes. And I can now browse it and play any episode I want. So I say, 'hey, there must be something if I eject this dvd, and put it in again, I would have same problem as last night'. And I have. And problem is back. Now I cant play anything again.
What do I need to play MPG Video. Totem Movie Player 2.26.1 Ubuntu 9.04
View 1 Replies View RelatedI can't play movies when I have browsers open. I am not sure if it is the browser, or what. I ran totem, and vlc in a terminal, and it says insufficient resources when I try to open a movie (see snapshot).
I also took a snapshot of my system monitor. I am not sure what resources it is talking about?
Just tried to play a DVD using movie player and it said 'cant read from resource' only happened recently. I used to be able to play them.
View 1 Replies View RelatedI have a lot of .ogv and .mpg files. Most of the .ogv files won't play, and none of the .mpg files will play, in Totem. I installed VLC media player and all the files will play in it. If I click on file properties in Nautilus for the files that won't play, it says "Creating Properties window. You can stop this operating by clicking cancel." But it never actually shows me the file properties.
View 7 Replies View RelatedI have some .3GP movies that where made with my mobile phone. I can only play the video and not hear the audio. Is there a way to convert these movies to other format so I can edit them. And is there a way to play a .3GP movie in a mediaplayer with the proper codecs?
View 3 Replies View RelatedDebian 5.0
Totem Movie Player 2.22.2
(Movie Player using GStreamer 0.10.19 and GNOME) how to play .ram file.
im trying to watch a movie i downloaded....plugged it into my tv via hdmi wire and turned it to the appropriate channel (hdmi2) and i cant seem to get the video to start playing and i just dont know why any ideas? maybe theres a specific application i need to install from the software center that has the capability?
REVISION! it kinda works now...comes up on both my laptop and tv at a different resolution all the icons are big....cant see the top and bottom panel bar too well...and it wont transmit the audio...thats just coming out of my laptop
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
I am not able to get the video in the iTunes movie trailer website to play. iTunes Movie Trailers.When I try to play a video an error message comes up as something like: PackageKit.gstreamer.plugin not able to find H.264 decoder.This has been discussed in a previous post: H.264 Codec & Mplayer.I have also done some reading and the gstreamer-plugin-bad package has ah H.264 parser, but does that also decode?I have updated my packages to the Packman repo: URL... tried installing and activating both the VLC and MPlayer plug-ins for firefox and am running Firefox 3.6.10 in an up-to-date OpenSuse 11.3 with Gnome
View 3 Replies View RelatedI am running Wheezy 7.9 and recently created a file, in xorg.conf.d, to set the monitor configuration because the EDID is not always read from the monitor. Everything works great but when the EDID is not read the monitor name, as shown in System Settings>Displays, shows as Unknown. I have the vendor info and modelname in the config file but they do not show in the Display GUI. Is there some variable that I can set in order to get a good monitor name displayed?
Probably should include some more information. I am using the Gnome Classic desktop and gdm manager. Here is the monitor conf file that I put in /etc/X11/xorg,conf.d
Code: Select allSection "Monitor"
Identifier "Monitor0"
VendorName "VSC"
ModelName "VA912b"
DisplaySize 376 301
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
[Code] ....