General :: CLI, Displays System Info Distribution Logo?
Mar 7, 2011
I remember screenshots in which a cli window is opened and in it kernel version, processor type, and other information is displayed along witnice little ascii art of the distribution logo. I have seen it for gentoo and debian, but forget the name.
View 6 Replies
ADVERTISEMENT
Jan 18, 2016
I am running Wheezy 7.9 and recently created a file, in xorg.conf.d, to set the monitor configuration because the EDID is not always read from the monitor. Everything works great but when the EDID is not read the monitor name, as shown in System Settings>Displays, shows as Unknown. I have the vendor info and modelname in the config file but they do not show in the Display GUI. Is there some variable that I can set in order to get a good monitor name displayed?
Probably should include some more information. I am using the Gnome Classic desktop and gdm manager. Here is the monitor conf file that I put in /etc/X11/xorg,conf.d
Code: Select allSection "Monitor"
Identifier "Monitor0"
VendorName "VSC"
ModelName "VA912b"
DisplaySize 376 301
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
[Code] ....
View 2 Replies
View Related
Feb 21, 2010
Do you now how to setup dual displays on the Ubuntu 9.10 distribution? HP Laptop 6910 with ATI driver?
View 3 Replies
View Related
Sep 19, 2010
When I say info, I get an empty document: nfo: (dir)Top, 1 linii --AllWhen I say info -f /usr/share/info/dir, I get the same.When I open /usr/share/info/dir in KWrite, I notice that there are tabulations in the Node: declaration.When I removed these tabulations, the directory suddenly displayed all right (info -f /tmp/dir).So I tried the same thing with the file extracted from the current package, and it contains tabulation characters, so I can see nothing there with info.
View 5 Replies
View Related
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies
View Related
Oct 1, 2010
I'm newbie to Linux. Can anybody help-me to select the best Linux distribution for newbies?
View 14 Replies
View Related
Dec 21, 2010
Take Red Hat Enterprise Linux for example, it has U1 to U5 editions, and each edition supported several kernels, like U5 supported 2.6.18-194.el5PAE, 2.6.18-194.el5xen and 2.6.18-194.el5.
How can I know all the kernels supported by each edition of various Linux distribution? Like all the kernels supported by Red Hat Enterprise Linux U3 or Debian 5.0, or SUSE 11. Is there any websites providing such information or I have to log in their official site to look for? And how can I be kept posted with such information?
View 5 Replies
View Related
Feb 12, 2010
Which linux is best for learning embedded systems which has ide like MCU8051ide, piklab and ide for arm processor.
View 2 Replies
View Related
Jun 21, 2011
I am having an IBM Thinkpad R51 Laptop which has the following specs.
1.6 GHz Single Core Processor.
256MB of DDR-RAM.
2MB of cache memory.
30GB of HDD.
Could anyone suggest me which linux distribution and release best suites my laptop.
View 14 Replies
View Related
Apr 22, 2010
Is any one distribution of Linux, particularly suited for color management and printing? I have alot of photo printing to do that needs to be accurate color wise, I have already installed Open Suse with Gnome to try Linux, on an old machine and the printing although good, is very slow...
View 4 Replies
View Related
Mar 29, 2010
I want to learn linux source code means I want to understand source code. How can I access that code in my current linux distribution? I know c,c++.
View 2 Replies
View Related
Mar 5, 2009
I would like to install a program (R for statistical computing). I am using Slackware. On the download page of R (The Comprehensive R Archive Network) there are options to download the code for Debian, Redhat, Suse, and Ubuntu. Which one should I download in my case (using Slackware)? Is there any of them which I should not download?
View 4 Replies
View Related
May 31, 2011
I just setup an EC2 instance running Linux. Is there a way to get the version/distribution of Linux that is running on the instance via the terminal?
View 3 Replies
View Related
Jul 23, 2010
I am currently creating a usb device driver consisting of mostly read and write commands. It can successfully read/write using the bulk endpoints, however reading from the interrupt endpoint causes a system crash.As the crash happens whilst writing to kern.log, the file doesn't get a chance to close, therefore done of my debug printk calls are saved. Also, I get know response from using the magic sysrq key.
Does anyone have an ideas on how I can get any system information about what's causing the crash, or possible causes of the crash. (Using a usb sniffer running on another pc, I can see that the packet is coming in from the interrupt endpoint).
View 2 Replies
View Related
Aug 22, 2011
can I change the debian logo on left-top with a my personal logo?
Edit: i use Debian Squeeze 6.0.2
View 9 Replies
View Related
Sep 1, 2010
how do you obtain system info like the CPU cache sizes and core speeds from the shell?
View 2 Replies
View Related
Jun 12, 2010
I am trying to change the ubuntu logo that appears before the applications tab on the top left corner. I tried the different ways I found on google but none of them work, can someone direct me and /or tell me how I can do this?
View 2 Replies
View Related
Feb 25, 2010
Having trouble booting Ubuntu 9.10, it gets hung at the first screen where the Ubuntu logo apears. Right now I'm running my Ubuntu 8.10 Live CD.
View 7 Replies
View Related
Mar 20, 2010
The system asked me to reboot and I just shut down the computer.Some hours ago, I wanted to start the computer and the system halted after the first logo showed of Ubuntu, after 15 minutes waiting, nothing happened. I tried to push keys on the keyboard, nothing helped (I even couldn't put on CAPS or num lock on the keyboard).After a secoind reboot I didn't even saw the Ubuntu logo. When there's a black screen, it just sits there.I have no idea if there was a kernel update (I assume there was, because the system wanted me to reboot)
View 6 Replies
View Related
Jun 8, 2011
How to remove X completely from the system?
As a Security practice I wanted to disable X from loading.
So i modified following line from /etc/inittab.
id:3:initdefault:
I was then able to start my machine in terminal mode(runlevel 3).
I wasn't satisfied at this stage as i was able to get the graphical console by merely typing code...
Now i have made the above line commented and removed execute bit of the file .
System is now behaving as i wish it would.
I have 2 questions here.
1)Is this Method considered to be stardard while removing X in linux distro.
Will it make any difference?
I m not using any application that explicitly use graphical user interface and i can work in runlevel 3.
2)Is any package responsible for loading X .If yes then removing shall remove X from the system,correct me if i m wrong.code...
View 3 Replies
View Related
Nov 4, 2010
the gnome-system-monitor in fedora 14 do not sho the distributionrelease in the system-tab. The place for the distribution release is empty.
View 7 Replies
View Related
May 19, 2010
Is there an actively developed Linux distribution that will work on a 386 or a 486 DX or DX2 that only has 16MB of RAM?
View 9 Replies
View Related
Jan 6, 2011
how do i get system info on desktop
View 1 Replies
View Related
Feb 23, 2011
I installed ARB in my pc...while running arb below error is occur...
- arb_ntree: error while loading shared libraries: libXm.so.4: cannot open shared object file: No such file or directory
ARB done
This type error also occur while running phylip programs
- drawtree: error while loading shared libraries: libXm.so.4: cannot open shared object file: No such file or directory
I dont know that my system contains this library or not...how I find that? My system is Fedora....
View 4 Replies
View Related
Dec 27, 2010
I have two 10.04.1LTS command line servers running different overall jobs. One is an upgrade that started as 9.10 and was upgraded to 10.04LTS when it came out. It has since been upgraded to a 10.04.1LTS server. It's ssh login displays the following:
Code:
bob@b-desktp:~$ ssh admin@192.168.0.153
admin@192.168.0.153's password:
Linux server.nnbob.net 2.6.32-27-generic #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 i686 GNU/Linux
Ubuntu 10.04.1 LTS
code....
No mail.Last login: Mon Dec 27 17:00:10 2010 from b-desktp.nnbob.net.Notice the nice system information presented there. How do I get the other (upgraded) server to do that too?
View 6 Replies
View Related
May 26, 2010
I want to get system info like up time, no of process etc. for up time i got the got from net but it is giving me error. i.e.
error:
Following is the code i m using
Code:
Whats wrong with the code?
View 2 Replies
View Related
Oct 1, 2010
I've been trying to figure this out... What command does the system use to display this at login:
Quote:
System information as of Fri Oct 1 08:35:54 CDT 2010
System load: 0.28
Usage of /: 10.8% of 17.89GB
Memory usage: 51%
Swap usage: 3%
Processes: 112
Users logged in: 1
IP address for eth0: <ip.address>
It's not uname, free, top, df, uptime, etc... Also doesn't appear to be anything in /proc that I've found. Anyone know what it is? I want to grab its output as part of a script. I could use other commands I suppose, but this system info output is neat and concise.
View 7 Replies
View Related
Mar 17, 2011
I am a new user of Linux and it was just my luck that my Windows partition along with my WD 350GB external HDD got infected with a virus. My computer science buddies suspect that the virus in my HDD was in a folder called System Volume Information. Right now, my Windows partition's been removed so my netbook is 100% Linux. I also deleted said folder from my HDD. However, the System Volume Information folder in my HDD still keeps on appearing.
I read that the System Volume Information folder is a Windows folder so I'm wondering why it still keeps on appearing? Is this still the virus? I'm skeptical but right now, I really don't know.
View 1 Replies
View Related
Aug 25, 2010
I'm a linux newbie and scripting novice and I'm trying to pull auditing info and dump it into a file. I made some login changes so it would get audited but I don't want to have to sift through the log to see who the user was and what was done. This is what I have below here and I can't seem to get it to extract the info want using the event id. The "ausearch -a $10" from the script should get it from the 10th column but it's not working.If I can get this to work I would like to add additional aureport options.
#!/bin/bash
yyyy=`date "+%Y"`
mm=`date "+%m"`
[code]...
View 6 Replies
View Related
Aug 6, 2010
so i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
View 9 Replies
View Related