Debian :: LDAP On Squeeze (6.0) Missing Slapd.conf?
Mar 1, 2011
I try to setup OpenLDAP on Debian Squeeze.But it seems the documentation I found is differed than the installation.
Normally I would expect /etc/ldap/slapd.conf as also mentioned at url.However this file does not exists and I got the feeling Debian changes a lot with the default (bit poor if you asked me).Seems they created a LDAP database and put the config in there, correct me if I am wrong?A folder /etc/ldap/slapd.d is created with some config inside. And also a /etc/ldap/ldap.conf does exist.
Is there any documentation on this, and what if I would like to have a flat config in /etc/ldap/slapd.conf?
View 4 Replies
ADVERTISEMENT
Aug 20, 2010
I am setting up LDAP server, i set slapd.conf(dc=proldap,dc=com) and start ldap it is OK but when i check using ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts result is : namingContexts: dc=my-domain,dc=com
it seems that it did not use my slapd.conf so i tried removing my slapd.conf from /etc/openldap and start slapd again and it did start with no errors. and when i do ldapsearch again still uses dc=my-domain,dc=com
I tried searching about this in google and found no answers,
my reference in setting up ldap is the link below. but it seemed that it always uses another configuration not the one i modified
I'm using Fedora12, ldap version 2.4.19. i installed ldap by yum install url
url
View 12 Replies
View Related
Mar 1, 2010
Slapd is up and running perfectly well, and I can add and remove entries without a problem. My OS is the Ubuntu based Mint.
So I was hoping for someone to give me a nudge in the right direction for doing this without a slapd.conf file, or directions for how to force slapd to pay attention to a slapd.conf file whose location I specify.
I've tried messing around with /etc/ldap/ldap.conf to no avail, I've tried just putting in a custom slapd.conf file but slapd doesn't pay attention to it.
And to the best of my knowledge I can't find anything written on this specific topic. I can find plenty on slapd.conf's, but that's just taunting me considering I don't even have it on my system.
View 1 Replies
View Related
Feb 20, 2010
If I do something to the effect of this:ldapsearch -b "dc=example,dc=com" -x -z 3000
I'll get this back at the end of the result set:
# search result
search: 2
result: 4 Size limit exceeded
The thing is is that I have way more (thousands) than what's being displayed here. And I've tried to mess around with /etc/ldap.conf, changing the SIZELIMIT directive to something else, 10000, let's say, and restarting the server, but the same goddamn thing happens.
I've been messing around with this for quite some time now, hopefully someone will be able to shed some light on this so that I can learn my way out of this mess that is LDAP. Also in a related matter, I'm running Mint (based off of Ubuntu), and all the documentation that I've seen (probably read a good 100+ pages in a few days now on this) keeps telling me to make changes to my slapd.conf file. What slapd.conf file? It doesn't exist, I can't find it at least. find / -name slapd.conf turns up nothing.
View 10 Replies
View Related
May 23, 2011
I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies
View Related
Oct 21, 2010
I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
View 11 Replies
View Related
Jul 13, 2010
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
View 8 Replies
View Related
Feb 26, 2010
I want to index my openLDAP database without shutting down or stopping by slapd. Is there a way to do that.
I also have master - slave architecture setuped for the replication.
View 4 Replies
View Related
Jun 1, 2011
I have a problem with Debian Squeeze. I have installed Squeeze and after that I installed LDAP according tho this guide: [URL]. When I log in and try to start Epiphany or Iceweasel nothing happens. I tried installing Chromium, but this program starts with the message "Chromium didn't shut down correctly". After some waiting it comes with another messages saying "Page(s) unresponsive. I also noticed that Open Office won't startup, other programs don't seem to have a problem.
View 2 Replies
View Related
May 24, 2010
I'm somewhat spoiled by standard installations that do it all. This time I'm doing it more manually.I've installed a sid guest vm. I want to give it a graphical face, so for a change I've chosen the lightweight xfce.Only I'm missing the xorg.conf. I've installed xdm, so I have a login. However, it can't get in from there.It hasn't yet generated an xorg.conf in /etc/X11.Short of copying one, which I suppose I might try, How do you prompt debian to generate and configure the xorg.conf from scratch?Currently, I have
root@sid:~# tail /var/log/Xorg.0.log
(II) Xen Virtual Pointer: Found absolute axes
(II) Xen Virtual Pointer: Found x and y absolute axes
[code]....
View 7 Replies
View Related
Apr 3, 2010
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies
View Related
May 4, 2010
Yesterday I installed debian squeeze and inside appearance preferences there are: theme, background and fonts tabs but the interface tab is missing. What do I need to install in order to have this missing tab?
View 2 Replies
View Related
Feb 8, 2016
Looking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
View 6 Replies
View Related
Mar 5, 2011
I have so far used reiserfs formatting both in my previous debian (sarge, etch and lenny) and opensuse (SLED10, opensuse-10.2,10.3 &11.3) and was very happy. When last month I installed debian squeeze I missed reiserfs (or did I miss noticing it?) Though Ext3 is giving me no trouble. I would love to have reiserfs. Is it now possible to change the filesystems without much trouble.
View 5 Replies
View Related
Mar 25, 2011
I tried to install Squeeze on a new laptop. The installation finished and I was able to log in, but a significant number of packages were missing, including network-manager and network-manager-gnome, OpenOffice, and gdebi. Everything under the System | Administration menu except Login Screen was missing. There's probably more missing, too, but I am not sure how to tell.
It happened a few times but with slightly different results (e.g. I think on one of the earlier install attempts, Iceweasel didn't get installed, but it was included in the most recent attempt). I tried installing using 6.0.1's CD 1, and 6.0.0's hybrid Live image on a USB stick (in both cases, the GNOME version). I had used the same USB stick to install Squeeze successfully on another laptop last week (i.e. I successfully got a complete, working install; I made no changes to the USB stick; then tried to install using it on this new laptop, and saw this behavior).
I tried using both the graphical and text installers. At the step asking what packages you want installed (which allows you to auto-install sshd or mail server, for example), each time I made no changes, so the 3 selected default settings (the first option, Desktop Environment, and the last 2 options, laptop and... whatever the other one is, I don't remember) should all have been installed.
I didn't use the net installer, and I ran the installer offline because both laptops require non-free firmware and I couldn't figure out last week how to get the installer to find that firmware (on another USB stick). So once I got to the GNOME desktop the most recent time, I copied the WiFi chip's firmware .deb onto the laptop and did a 'dpkg -i', then did the same thing to get network-manager-gnome and its dependencies installed; and once I connected to our network I started an 'apt-get install gnome' to try to get the entire desktop environment installed (that also installed the programs that show up under System | Administration).
Is there anything important I might still be missing? Is there a list of installed-by-default packages that I could compare against say a 'dpkg -l'? Does this sound like some sort of known issue?
View 3 Replies
View Related
Jul 22, 2009
About a month ago I upgraded from Lenny to Squeeze and everything seemed fineBut sometime between then and now I lost the maximize and close buttons (I still have the minimize)This is only a minor annoyance for me but a major one for my wife.I searched the web and some other forums but have found no help.
View 3 Replies
View Related
Jun 3, 2011
I had installed ssh but something went wrong and I uninstalled it. I removed the SSH configuration files by hand (I deleted all /etc/ssh folder).After ssh installation (I mean apt-get install ssh) I noticed that I have no SSH configuration files.I tried apt-get install openssh-server but i still have no SSH configuration files.
View 2 Replies
View Related
May 29, 2010
so I just installed Squeeze Alpha1 amd64, dual boot with MS Vista using Grub. Everything seemed fine, but I'm apparently missing about 40GB of space. It should be set up as so:
101GB NTFS /dev/sda1 - Vista
12GB NTFS /dev/sda2 - HP Recovery
45GB ext3 /dev/sda3 - / Debian squeeze
[code]...
View 5 Replies
View Related
May 28, 2010
I am unable to find any ldap.conf parameter or pam.d/system-auth setting from where i can restrict the LDAP users having uidNumber less than a particular number, say 500 to login into the system.I am using OpenLDAP server and tried pam_max_uid 500 in ldap.conf but it didn't work.
View 2 Replies
View Related
Oct 20, 2010
I am trying to setup LDAP server on Ubuntu 10.04 and am sticking to the old /etc/ldap/slapd.conf file configuration.
I had to comment ldapi:/// from /etc/default/slapd since it was giving 'Address already in use error'. Also had to juggle with pid directory and file issues
After that I was able to start the slapd daemon (service slapd start) but now I am running into multiple issues:
1. Can't stop the service with service slapd stop
Code:
## Service stop returns 0, maybe because start-stop-daemon is not giving error
#service slapd stop
Stopping OpenLDAP: slapd.
# echo $?
0
Will switching to BDB database resolve this ?Also can't I slapcat at non-root user ??
View 2 Replies
View Related
Aug 9, 2010
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
View 3 Replies
View Related
Jun 21, 2011
I need the command line application "starttls". It used to have its own package in Lenny [url], but I can't find it in Squeeze, even when searching other packages by means of "apt-cache search".
View 2 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
Dec 8, 2010
I am trying to fix missing grub.conf on RHEL5.I booted from installation media > entered Rescue Mode > issued following cmds:
chroot /mnt/sysimage
grub-install /dev/sda1
:I get a message that installation is finished with no error and a device map is created.
when i reboot (without installation media) i land up at grub>from grub> i did followingroot (hd0,0)setup (hd0)and got successful installation message.On rebooting I again get the grub> prompt
View 7 Replies
View Related
Jul 22, 2009
how to create a missing /etc/X11/xorg.conf file.
I need to set certain parameters in xorg.conf, and my old xorg.conf won't work on my latest laptop.
View 14 Replies
View Related
Mar 17, 2010
I was running an update to updgrade firefox to the latest version. the update timed out and now when i boot the laptop i get the command line login. Typing startx brings a screen with a black cross in the middle and a black and white background.
In the boot process a lot of errors are coming up saying "conf files need .conf". Also i have noticed an error that says the xorg.conf file is not where it should be. I know this is responsible for graphical boots so could be my problem. However yast and network services are also not working in the command line so i am unable to update to fix this. I installed from a live CD so im unsure how to use this to repair my system?
View 5 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Dec 23, 2010
after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
View 2 Replies
View Related
Dec 1, 2014
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies
View Related
Jan 16, 2011
I use Ubuntu server 10.04 I try to install slapd, but i get the following error
Code:
libldap-2.4-2 (= 2.4.21-0buntu5.2) but 2.4.21-0ubuntu5.3 is to be installed
E: Broken packages
And also, when I try to install some other packages such as nagios, squid, .. I get the some list of errors. One of the error say something like
Code:
Failed to fetch http://id.archive.ubuntu.com/ubuntu/pool/main/n/nagios-plugins/nagios-plugins-standard_1.14.14-1ubuntu1_i386.deb Temporary failure resolving 'id.archive.ubuntu.com'
What to do? Should I edit /etc/apt/source.list to point to other repo site?
View 2 Replies
View Related
