Debian :: Joomla Install On Server
Dec 3, 2009
I have my own server that I am trying to install joomla on... (i have done to types on installs, One Via FTP (Joomla 1.5.15) and One Via SSH (joomla 1.5.10)) both installed with out issue and runs. the issue I am having is that the templates being installed dont look right [url] I have installed it on a DreamHost Server with out issue. I am thinking its my server, After installing debian (with Apache2, PhP5, Mysql, PhPMyAdmin, Webmin) I had to change two things, add modrewrite and add virtual host (to home more then one domain).
View 1 Replies
ADVERTISEMENT
Mar 1, 2011
I want to install joomla on apache
View 6 Replies
View Related
Dec 4, 2010
I've got a Joomla website made for me. It is hosted with a hosting company. Here and there i change some of its content, but i want to practice it locally on my computer before i do bigger things on the web, so that if things get into a serious problem it is close at hand to fix it up. I've installed apache2 php5-mysql libapache2-mod-php5 mysql-server on my Ubuntu 10.04 desktop. also, I've installed Joomla up and running.
My question is: how do i transport/copy my website from the web into my computer?
I know that I need to transfer the database, where do i put it in my local file system, and what additional commands are required for that?
I know that I need to transfer the public_html, where do i put it in my local file system, and what additional commands are required for that?
View 7 Replies
View Related
Sep 4, 2010
I need to install joomla on ubuntu. how can i do it? please provide me full information regarding this.
View 2 Replies
View Related
Apr 27, 2010
I have gone through the whole installation process of installing joomla onto my Server under ispconfig3. After installing and deleting the installation file as required when i try to get to the log in page i get this message on my screen "No configuration file found and no installation code available. Exiting..."
View 2 Replies
View Related
Oct 15, 2010
I have installed Joomla on an Ubuntu 10.04 Server pc. The Ubuntu server is connected to my Novell NetWare network via static IP. I need the Ubuntu server to send mail to my mail server through smtp, my entire network has static IP's. The Ubuntu server does not need to receive mail only send, I have found that I could try use sendmail, postfix or exim4. I tried Exim4 but I am battling with the setup. For my situation what would be the best to use? What config's are most important to set?
View 2 Replies
View Related
Aug 12, 2011
I want to install Joomla on my laptop. Do I need ubutu Server to do this?
View 1 Replies
View Related
Apr 15, 2010
I have big problem. I want to learn how to make a web site via joomla or wordpress. I install joomla and wordpress via repository. So i have all what i need. So....i have problem with permissions.
I have Mandriva 2010 one GNOME
Here is link to image
[url]
[url]
View 1 Replies
View Related
Nov 15, 2009
I have just installed joomla and proceeded to do the web install. Got the interface up and running and its now complaining it does not see the mysql server running. I do in fact have it running. Veryfied it with mysql command on command line and it complained with missing attributes.
I read a thread that it needs php-mysql installed. So went to proceed to install it. Well, I did not have that and went to install it. Verified it. Package mysql-server-5.0.77-3.el5.i386 already installed and latest version
I then did a service mysql reset.
Checked back at the joomla web install interface and still, it says there is no mysql support! What is next? Im running centos OS. Also, I am running LAMP
View 3 Replies
View Related
Apr 18, 2010
My task is to set-up a dedicated LAMP server to host a site with joomla (this is basically LAMP + joomla which is a PHP-based content management system). Beside the basic web content, the site will hold a large amount of sample videos and similar large files (2TB on a RAID is available a lot of them will be used).
I googled a lot, and I read a lot about all the virtualisation solutions such as kvm, xen, virtualbox, vmware, openvz and vserver, I more or less understand their properties, but I cannot decide which one to choose.
I tried a few of them but I have no experience about its long term usage, stability etc.
In short I need an advice from people who successfully running real-word sites with some virtualisation solution. Basically I would like to know which one to use for the more robust, stable server.
Only read further if you have a similar system.
I would like to use some kind of virtualisation solution for the joomla server, becauseI have no trust in such systems, so if it is hacked I will just recover from a backup (or reinstall) the guest, but I do not need to go to the server-park. (after it, I have to find out how it was hacked) perhaps later we would like to use some other services which is also good if they are separated
I would like to use Slackware as a host and a guest.
I would like to put one file-system to the large raid array, and share it among the virtual-servers if it is possible (there is only one server now but there could be more with different applications). Or do I need to use lvm on the raid for the different servers?
Here is what I think:Because I want to "run linux on linux", first I thought that a container based solution (vserver, openvz) is perfect for the job, because of the low overhead and because I can use the whole file system for the storage, and I can share free space with other services in the future. The problem is vserver and openvz are big patches for the kernel, but I would like to change slackware as small as possible. So I would like to stay with the kernel of slack-13.0. openvz does not even support 2.6.29 while vserver is, but I have to compile a new patched kernel. So the the options here are to use a different kernel with openvz, or use the same but patched kernel with vserver.
Another option is to use "real" virtualisation solutions such as kvm, xen, virtualbox and vmware. It seems that kvm is the future, because it is already in the official kernel and "powered" by Red Hat, so it will be well supported. I likely will choose kvm.
As i wrote I tried a few of them but I have no experience about its long term usage, stability, so I want here about which one is used in real word servers, what kind of problems (stability) they have, etc.?
View 4 Replies
View Related
Feb 1, 2010
My current situation involves me having webmin (virtualmin) installed on my current centos server. Im using virtualmin gpl and my users/hosted sites are not very smart when it comes to making a website. They can upload sites via FTP and manage minor things but thats about it. What i want to do is make a couple of scripts using the terminal style that can do a quick auto install of Joomla. The command will run as the user who is executing it in WebMin.
Here is the Locations of the items in transfer.
I will have 2 premade sets; one Joomla SourceCode-FileSystem ; A Joomla MySql database to go along with it.
Heres what I need to do;
Variable: TheUsername = The WebMin user as described above
1. Check to make sure File /home/TheUsername/public_html/index.php dose not exist. If dose then cancel the install.
2. Copy files /NoodleServerFiles/AutoInstall/Joomla/ to /home/TheUsername/public_html/
3. Create a Database Named: TheUsername-Joomla
4. Enable TheUsername to beable to read and write to it.
5. Inport /NoodleServerFiles/AutoInstall/Databases/Joomla.sql to that database
6. Edit the file /home/TheUsername/public_html/configuration.php on specific lines Example: Line10: DB_user: TheUsername
7. Save it.
8. Display Text in the Terminal Command saying "Success in creating your website. Go look!"
View 10 Replies
View Related
Jan 29, 2010
I made a full install of Slackware and have been using one of my boxes as an Apache web server. I recently tried to install Joomla, the PHP CMS software, and when I ran the pre-install requisite checker (The second step of the installation), the installer notified me that I do not have MySQL support. I find this especially strange as I've made webpages using PHP that made use of MySQL databases.
My pre-post research has lead me to several other people with the same problem. Half were using windows, and just had not uncommented the "extension mysql.so" line in the php.ini file. The other half solved their problem by installing their distro's php-mysql module. According to what I'd read, you can still use MySQL if you don't have that module installed, but Joomla does need it to be able to use the MySQL database.
I've searched long and hard for this plugin/add-on/module for Slackware, but to no avail. It's available in RPM format, and I know that it's possible to use rpm2tgz to convert these files, but I don't know exactly what the issue is, and if Slackware may be different. I don't want to install that and then find out that it overwrote something that I'd needed.
View 3 Replies
View Related
Jun 28, 2009
I am having a time at trying to get a simple FTP setup to my Var/www/html folder for my canned Joomla website. I can log in anon with no write permissions, but it will not log in using any users I have setup on the server. I've googled a bunch, but nothing to correct my 530 authentication failure when I try to log in as one of my user accounts for the server.
View 2 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
Feb 24, 2010
I've been on the #ubuntu IRC for hours trying to figure this out. Here are some outputs of relevant commands.
ls -ltr /var/
Code:
total 40
drwxrwsr-x 2 root staff 4096 Oct 20 00:04 local
drwxr-xr-x 2 root root 4096 Oct 30 17:57 opt
drwxrwxrwx 11 root root 4096 Jan 25 11:02 cache
[Code].....
I can log in via FTP absolutely fine, I cannot CHMOD files or upload files though.
View 3 Replies
View Related
Jul 5, 2010
I've been trying to get Joomla! up and running on my hp 64-bit laptop which runs ubuntu 10.04. I want to use it to develop websites and upload them later. I also want to use it as a testing environment for other sites I make using HTML/CSS. I know I need LAMP and then Joomla!. But it all seemed to be a little too unclear right now. I've looked around for a smooth and straight-forward instruction to install it on my machine. Alas, it has not come to my screen, ... at least not for now. The Joomla wiki does not have Ubuntu instructions and I am absolutely sure somebody has done this in Ubuntu and can give me a step-by-step instruction on how to do that.
View 6 Replies
View Related
Jan 2, 2011
I am setting up an ubuntu server, in order to use it with Joomla.
Does someone knows if is possible to use PostFix as SMTP server for Joomla?
If does; would be necessary to install IMAP or POP3, Webmail etc if I just want to send automatics mails via Joomla.
View 3 Replies
View Related
Jan 8, 2011
Ive installed Uubntu 10.04 with some virtual servers. On some of them i'm running Joomla CMS and i have problem with php mail function... i think. The problem is, when i register some new user in the Joomla, Joomla cant send the user notification mail and the admin dont get the notification mail too. So is the problem with joomla, phpmail or in the configuration of apache or php?
View 1 Replies
View Related
Feb 1, 2009
I've created a mysql user and he can connect Joomla to mysqld when everyone has full permissions to the mysql homedir but I know this is bad from a security standpoint. If I set mysql user as the only one with permissions then I can't connect. I know Joomla support is not very help from past experience, wish I could dump it for something else but it does work great once it is configured so I need to keep it around, can anyone make a guess as to what permissions I need to have set on mysql's home dir so that joomla can still connect yet I am more secure than now?
View 11 Replies
View Related
Feb 15, 2010
I need to be able to store users logged at chat server. The chat program stores the login information in a text file (no db). I need a modification so the user info is read from the flat file and stores into a table in Joomla db. I don't have access to source for making the Java Chat Server store the data directly to joomla db is not possible.Any pointer will be appreciated.Below if the code that read s the information from Java Chat Server.
Code:
function chat_getChattersFromLocalServer()
{
[code]...
View 3 Replies
View Related
Apr 7, 2009
I have recently merged two Joomla 1.0 sites I ran into one. I imported the articles I wanted to keep to the new site, and I have the old site's domain pointing as an alias at the new site. The new site is www.theouthousers.com . The old site was www.bludblood.com .
I also have the core SEF URLs on, using the htaccess.txt file that came with Joomla.
I have one writer for the old site who linked to his articles in various places, so I am trying to set up redirects for him so that he doesn't have to change all of his links.
For instance, I need something like:
http://www.bludblood.com/joomla/inde...d=25&Itemid=51
To redirect to the equivalent location on the new site:
[url]
And I also need specific links like:
[url]
To redirect to their new counterparts:
[url]
Keeping in mind that www.bludblood.com is now an alias of www.theouthousers.com, is there any way to do this? I have been trying with rewrite rules and redirects, and cannot seem to achieve the desired effect.
Tried various versions of:
Code:
Redirect [url] [url]
With the http, without, as regexps, as 301s, as permanents, etc, and it just will not work. Also tried as RewriteRule.
View 2 Replies
View Related
Aug 18, 2011
How to install IRC server in linux debian ?
View 1 Replies
View Related
Jul 29, 2011
I have tried a few time now installing the GUI on debian. I would do the following
Code:
apt-get install x-window-system
apt-get install gnome
apt-get install vnc4server
This time I got
[Code]...
W: Some index files failed to download, they have been ignored, or old ones used instead.W: You may want to run apt-get update to correct these problems I am somewhat new to linux servers. I have played and used linux on laptops and desktops.
View 2 Replies
View Related
Feb 17, 2011
I need to install LAMP server in Debian 6. But like Ubuntu there is no option to install Lamp Server
View 7 Replies
View Related
Sep 4, 2009
Debian Lenny, Stable: So I followed this procedure:
Step 1:
* Copy files to the /etc/openvpn/easy-rsa/ directory
sudo mkdir /etc/openvpn/easy-rsa/
sudo cp -R /usr/share/doc/openvpn/examples/easy-rsa/2.0/* /etc/openvpn/easy-rsa/
Step 2:
* Edit /etc/openvpn/easy-rsa/vars
sudo vi /etc/openvpn/easy-rsa/vars
Change these lines at the bottom so that they reflect your new CA.
export KEY_COUNTRY="US"
export KEY_PROVINCE="CA"
export KEY_CITY="SanFrancisco"
[code]....
I can login with my other machine to my server but wehen I start hte server it does not fail. seem sto work, but windows see nothing. How to give the passwords to my users?
View 7 Replies
View Related
Sep 22, 2010
I would like to install a file server on an old computer and access it via USB from my laptop.
View 2 Replies
View Related
Sep 1, 2014
I would like to enable SSH on my debian server but not for MySQL. For MySQL, I want to connect normally.
View 7 Replies
View Related
Apr 16, 2011
This is my first time to use Debian. I ordered the discs from LinuxCD - Debian 5.0.7. I am at the install point of Software Selection packages and I don't want to install unnecessary ones. Desktop environment and Standard system are ticked by default. I am installing to a desktop machine. I don't think I need Web server and going to Apache's FAQ still didn't answer my question whether I need it or not. I am not sure about DNS server, either. At this point, the only one I am sure I need is the Printer server. I found one page that loosely describes these software collections, but I am still unsure. Since most people do not use dial up these days it isn't taken into account of the description.
View 2 Replies
View Related
Jun 15, 2011
I am running virtualbox on a Mac Mini Server. I would like to install Debian on it and give it an internal static IP address. E.g. 192.168.1.xxx
I am looking at all the downloads. The Mac Mini Server Snow Leopard has no CD/DVD but plenty of disk space.
It will be used as a LAMP webserver, Java, Ghostscript and pdftk but also install ISPConfig on it.
I was looking at this ISO: [URL] Is this ok?
The Mac is a 64 bit Intel based machine. If I wanted 64 bit on the VirtualBox, which 64 bit ISO should I get?
View 1 Replies
View Related
Sep 28, 2010
I'm trying to install nfs-kernel-server on my squeeze and have strange error.
Here the console output:
The following NEW packages will be installed:
I tried to google for this errors and find that manually restarting nfs-common, portmap should help but no luck.
View 1 Replies
View Related
