I have big problem. I want to learn how to make a web site via joomla or wordpress. I install joomla and wordpress via repository. So i have all what i need. So....i have problem with permissions.
I have Mandriva 2010 one GNOME
Here is link to image
[url]
[url]
I'm trying to get wordpress to work with lighttpd and my home test server... <name>.dnsalias.org as my IP is not static... When I install wordpress ( via apt-get ) and set it up through install script like this:
bash /usr/share/doc/wordpress/examples/setup-mysql -n wordpress <name>.dnsalias.org It is accessible from outside of my network but not from local one where the sever ip is 10.0.0.200 From outside it is using correctly domain <name>.dnsalias.org but from inside when I try to use ip 10.0.0.200 from other pc on net it will not work..a s it still using <name>.dnsalias.org in all links... Also I would like to have it in <name>.dnsalias.org/wordpress as I have another test site in <name>.dnsalias.org/<test_Site> which by thee way works from inside and outside of my network.... its just wordpress ...
I have followed this guide: [URL] but its for apache... I spend whole night searching for some solution and now I'm dead tired and you are my last hope ...( ....Obi Wan Kenobi ) So does someone running wordpress in setup like I described above, if yes
I need to install joomla on ubuntu. how can i do it? please provide me full information regarding this.
View 2 Replies View RelatedI have gone through the whole installation process of installing joomla onto my Server under ispconfig3. After installing and deleting the installation file as required when i try to get to the log in page i get this message on my screen "No configuration file found and no installation code available. Exiting..."
View 2 Replies View RelatedI want to install Joomla on my laptop. Do I need ubutu Server to do this?
View 1 Replies View RelatedI have my own server that I am trying to install joomla on... (i have done to types on installs, One Via FTP (Joomla 1.5.15) and One Via SSH (joomla 1.5.10)) both installed with out issue and runs. the issue I am having is that the templates being installed dont look right [url] I have installed it on a DreamHost Server with out issue. I am thinking its my server, After installing debian (with Apache2, PhP5, Mysql, PhPMyAdmin, Webmin) I had to change two things, add modrewrite and add virtual host (to home more then one domain).
View 1 Replies View RelatedI want to install joomla on apache
View 6 Replies View RelatedMy current situation involves me having webmin (virtualmin) installed on my current centos server. Im using virtualmin gpl and my users/hosted sites are not very smart when it comes to making a website. They can upload sites via FTP and manage minor things but thats about it. What i want to do is make a couple of scripts using the terminal style that can do a quick auto install of Joomla. The command will run as the user who is executing it in WebMin.
Here is the Locations of the items in transfer.
I will have 2 premade sets; one Joomla SourceCode-FileSystem ; A Joomla MySql database to go along with it.
Heres what I need to do;
Variable: TheUsername = The WebMin user as described above
1. Check to make sure File /home/TheUsername/public_html/index.php dose not exist. If dose then cancel the install.
2. Copy files /NoodleServerFiles/AutoInstall/Joomla/ to /home/TheUsername/public_html/
3. Create a Database Named: TheUsername-Joomla
4. Enable TheUsername to beable to read and write to it.
5. Inport /NoodleServerFiles/AutoInstall/Databases/Joomla.sql to that database
6. Edit the file /home/TheUsername/public_html/configuration.php on specific lines Example: Line10: DB_user: TheUsername
7. Save it.
8. Display Text in the Terminal Command saying "Success in creating your website. Go look!"
I made a full install of Slackware and have been using one of my boxes as an Apache web server. I recently tried to install Joomla, the PHP CMS software, and when I ran the pre-install requisite checker (The second step of the installation), the installer notified me that I do not have MySQL support. I find this especially strange as I've made webpages using PHP that made use of MySQL databases.
My pre-post research has lead me to several other people with the same problem. Half were using windows, and just had not uncommented the "extension mysql.so" line in the php.ini file. The other half solved their problem by installing their distro's php-mysql module. According to what I'd read, you can still use MySQL if you don't have that module installed, but Joomla does need it to be able to use the MySQL database.
I've searched long and hard for this plugin/add-on/module for Slackware, but to no avail. It's available in RPM format, and I know that it's possible to use rpm2tgz to convert these files, but I don't know exactly what the issue is, and if Slackware may be different. I don't want to install that and then find out that it overwrote something that I'd needed.
i havea server linux ubuntu 10.04, i want to install Word press on it. how can i do it, i need step by stepguide please, from downloading relevant softwares to installing them.
View 5 Replies View RelatedCan anyone tell me how to install WordPress on Ubuntu 10.10?
View 5 Replies View RelatedI have a local install of Wordpress and I've added a port forward rule in my firewall to share our site with family and friends (we're using a members only plugin). I have a DYNDNS account and my router automatically updates with this account.The problem I'm having is when I test accessing our local site from outside my network. I use my dyndns account name and port number to access my local Wordpress, I can see the login screen but once I login, the url changes from my dyndns name to the IP Address of my local server and then I never see any pages on my site.
I'm thinking it has something to do with either the WordPress address (URL) or the Site address (URL) since they currently have the ip address of my local ubuntu server that hosts our Wordpress site.So what have I configured incorrectly here?
I've been on the #ubuntu IRC for hours trying to figure this out. Here are some outputs of relevant commands.
ls -ltr /var/
Code:
total 40
drwxrwsr-x 2 root staff 4096 Oct 20 00:04 local
drwxr-xr-x 2 root root 4096 Oct 30 17:57 opt
drwxrwxrwx 11 root root 4096 Jan 25 11:02 cache
[Code].....
I can log in via FTP absolutely fine, I cannot CHMOD files or upload files though.
I've been trying to get Joomla! up and running on my hp 64-bit laptop which runs ubuntu 10.04. I want to use it to develop websites and upload them later. I also want to use it as a testing environment for other sites I make using HTML/CSS. I know I need LAMP and then Joomla!. But it all seemed to be a little too unclear right now. I've looked around for a smooth and straight-forward instruction to install it on my machine. Alas, it has not come to my screen, ... at least not for now. The Joomla wiki does not have Ubuntu instructions and I am absolutely sure somebody has done this in Ubuntu and can give me a step-by-step instruction on how to do that.
View 6 Replies View RelatedI am setting up an ubuntu server, in order to use it with Joomla.
Does someone knows if is possible to use PostFix as SMTP server for Joomla?
If does; would be necessary to install IMAP or POP3, Webmail etc if I just want to send automatics mails via Joomla.
Ive installed Uubntu 10.04 with some virtual servers. On some of them i'm running Joomla CMS and i have problem with php mail function... i think. The problem is, when i register some new user in the Joomla, Joomla cant send the user notification mail and the admin dont get the notification mail too. So is the problem with joomla, phpmail or in the configuration of apache or php?
View 1 Replies View RelatedI have just installed joomla and proceeded to do the web install. Got the interface up and running and its now complaining it does not see the mysql server running. I do in fact have it running. Veryfied it with mysql command on command line and it complained with missing attributes.
I read a thread that it needs php-mysql installed. So went to proceed to install it. Well, I did not have that and went to install it. Verified it. Package mysql-server-5.0.77-3.el5.i386 already installed and latest version
I then did a service mysql reset.
Checked back at the joomla web install interface and still, it says there is no mysql support! What is next? Im running centos OS. Also, I am running LAMP
My task is to set-up a dedicated LAMP server to host a site with joomla (this is basically LAMP + joomla which is a PHP-based content management system). Beside the basic web content, the site will hold a large amount of sample videos and similar large files (2TB on a RAID is available a lot of them will be used).
I googled a lot, and I read a lot about all the virtualisation solutions such as kvm, xen, virtualbox, vmware, openvz and vserver, I more or less understand their properties, but I cannot decide which one to choose.
I tried a few of them but I have no experience about its long term usage, stability etc.
In short I need an advice from people who successfully running real-word sites with some virtualisation solution. Basically I would like to know which one to use for the more robust, stable server.
Only read further if you have a similar system.
I would like to use some kind of virtualisation solution for the joomla server, becauseI have no trust in such systems, so if it is hacked I will just recover from a backup (or reinstall) the guest, but I do not need to go to the server-park. (after it, I have to find out how it was hacked) perhaps later we would like to use some other services which is also good if they are separated
I would like to use Slackware as a host and a guest.
I would like to put one file-system to the large raid array, and share it among the virtual-servers if it is possible (there is only one server now but there could be more with different applications). Or do I need to use lvm on the raid for the different servers?
Here is what I think:Because I want to "run linux on linux", first I thought that a container based solution (vserver, openvz) is perfect for the job, because of the low overhead and because I can use the whole file system for the storage, and I can share free space with other services in the future. The problem is vserver and openvz are big patches for the kernel, but I would like to change slackware as small as possible. So I would like to stay with the kernel of slack-13.0. openvz does not even support 2.6.29 while vserver is, but I have to compile a new patched kernel. So the the options here are to use a different kernel with openvz, or use the same but patched kernel with vserver.
Another option is to use "real" virtualisation solutions such as kvm, xen, virtualbox and vmware. It seems that kvm is the future, because it is already in the official kernel and "powered" by Red Hat, so it will be well supported. I likely will choose kvm.
As i wrote I tried a few of them but I have no experience about its long term usage, stability, so I want here about which one is used in real word servers, what kind of problems (stability) they have, etc.?
I've created a mysql user and he can connect Joomla to mysqld when everyone has full permissions to the mysql homedir but I know this is bad from a security standpoint. If I set mysql user as the only one with permissions then I can't connect. I know Joomla support is not very help from past experience, wish I could dump it for something else but it does work great once it is configured so I need to keep it around, can anyone make a guess as to what permissions I need to have set on mysql's home dir so that joomla can still connect yet I am more secure than now?
View 11 Replies View RelatedI need to be able to store users logged at chat server. The chat program stores the login information in a text file (no db). I need a modification so the user info is read from the flat file and stores into a table in Joomla db. I don't have access to source for making the Java Chat Server store the data directly to joomla db is not possible.Any pointer will be appreciated.Below if the code that read s the information from Java Chat Server.
Code:
function chat_getChattersFromLocalServer()
{
[code]...
I have recently merged two Joomla 1.0 sites I ran into one. I imported the articles I wanted to keep to the new site, and I have the old site's domain pointing as an alias at the new site. The new site is www.theouthousers.com . The old site was www.bludblood.com .
I also have the core SEF URLs on, using the htaccess.txt file that came with Joomla.
I have one writer for the old site who linked to his articles in various places, so I am trying to set up redirects for him so that he doesn't have to change all of his links.
For instance, I need something like:
http://www.bludblood.com/joomla/inde...d=25&Itemid=51
To redirect to the equivalent location on the new site:
[url]
And I also need specific links like:
[url]
To redirect to their new counterparts:
[url]
Keeping in mind that www.bludblood.com is now an alias of www.theouthousers.com, is there any way to do this? I have been trying with rewrite rules and redirects, and cannot seem to achieve the desired effect.
Tried various versions of:
Code:
Redirect [url] [url]
With the http, without, as regexps, as 301s, as permanents, etc, and it just will not work. Also tried as RewriteRule.
I am having a time at trying to get a simple FTP setup to my Var/www/html folder for my canned Joomla website. I can log in anon with no write permissions, but it will not log in using any users I have setup on the server. I've googled a bunch, but nothing to correct my 530 authentication failure when I try to log in as one of my user accounts for the server.
View 2 Replies View RelatedI host a number of sites and recently migrated to a new server (both old and new are running Ubuntu 10.04 [I only upgrade my web server when there is a new LTS release]). After the migration, Wordpress is asking for ftp credentials to update plugins, which it never used to do. I'm certain this is user/group/permissions related, but because of the new setup, I'm not sure what these should be set to.
On the previous server, each site was a subdirectory of /var/www/ and everything was owned by www-data. This wasn't the best setup, since it meant my users didn't have direct access to their own sites. In the new setup, each page I host is in /home/username/www/. Consequently, all the files are owned by 'username'.
My guess is that Wordpress' request for ftp credentials stems from a conflict between the apache2 user and the usernames that own the sites. Is this accurate? If so, how do I rectify this?
I run Debian 5.4 with ISP Manager as CP. I put a .htaccess in the root directory of my wordpress blog. The content of the .htaccess is:
# BEGIN WordPress
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-f
[Code]....
But after I created a static page and change permalinks in wordpress with anything other than standard I get a browser 404 error (not 404 error with template).
Location of the blog content that is shown in CP: /var/www/sorin/data/sitename.ro Only the index of the blog is loading. What can I do? I have Debian up-to-date.
But I can't upload files or pictures all the time.Everytime I tried to upload , it tips me : "can't create file or folder ...... . is its parents folder writable by the server?"Now it's considered as a bug.But I tried 3 methods introduced on the net . But none of them worked. They are : 1: change the folder permission to 777 , not work for me.2: change the URL to "wp-content/uploads" not "/wp-content/uploads" , not work for me.3: use full url not "wp-content/uploads" also not work.
View 8 Replies View RelatedI have a problem with my Wordpress installation.It works from inside of my LAN but not from Internet.I have opened for the port on my router and the default html page works from Apache2 from Internet.
View 5 Replies View RelatedI have my own personal web server with xubuntu on it, but after I upgraded to 9.10 my wordpress blog stopped working.
View 9 Replies View RelatedI have question regarding setting permissions on wp-content/uploads... in wordpres. I read a tutorial where they want you to set permissions: chown -R julie.julie uploads/ chmod -R 777 uploads/ 777 makes it rwx for others as well. It's not secure! It works but is temporary fix. How I can make sure that the user julie (wordpress) will be able to write to it but anybody else wont.
View 3 Replies View Relatedi have been using kloxo with apache for my websites and it's on a high load, i have to change with lighttpd and i don't know how to make wordpress use permalinks, i tried to install mod magnet but it wasn't in centos.
View 1 Replies View RelatedI have a blog on my site and am using htaccess rewrite rules to block all those nasty scripts from trying to execute various things mostly relating to phpmyadmin and wordpress. This has reduced my httpd error logs to less than half from before.
Am trying to come up with a rule to rewrite all calls to certain files if they are not originating from my domain, here is how it looks right now but it's not working as I can see scripts trying to hit "wp-comments-post.php" getting a 500 Internal Server Error.