Debian Installation :: Xauthority Does Not Exist - File Or Directory Not Found
May 2, 2015
I am running a fairly new Debain Jessie stable installation with Xfce desktop. I need to use Xfce4 becuas the standard Gnome 3 does ot work when logging in with xrdp which I use becuase the actual box is headless.
I have an issue when starting synaptic. When I start it from the menu entry it just does not start. When I start from the terminal with
Code: Select allgksudo synaptic
I get an error box "Unable to copy the user's Xauthorization file" At the same time I can see in the terminal window a message
"Error copying '/home/userxxx/.Xauthority' to /'tmp/libgksu-SwcIe0': File or Directory not found".
I assume it is related to that I use a rdp session to connect, but I am otherwise clueless.
Code: Select alluserxxx@server2>xauth
xauth: file /home/userxxx/.Xauthority does not exist
View 2 Replies
ADVERTISEMENT
Dec 20, 2009
Been trying to get nxserver running on 11.2 i386 at location A and keep getting an error on connecting from client at location B.
Code:
NX> 203 NXSSH running with pid: 6439
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[code].....
View 6 Replies
View Related
Jan 25, 2010
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies
View Related
Oct 22, 2010
here is the most importent part of the file setup.shhere link to pastebin:http://pastebin.com/mwQ1UArHand here the part:
cd
chmod 777 ../bin/panel
cd ../bin/panel
[code]....
View 2 Replies
View Related
Apr 17, 2015
Installed Debian 7.8 KDE next to Windows 8.1.
Installed perfect perfect (except for network part). Grub came up, I selected Linux. After start up I typed
Code: Select allstartx
And I get the
Code: Select allFatal server error: no screens found
Also when I run
Code: Select allsudo iwconfig all I get is
Code: Select alllo no wireless extensions
eth0 no wireless extensions
Running lspci I get (vga for startx problem and network for WiFi problem)
Code: Select allVGA compatible controller: Intel Corporation ValleyView SSA-CUnit (rev 0e)
Code: Select allNetwork controller: Atheros Comm. AR9485 Wireless network adapter (rev 01)
View 6 Replies
View Related
Aug 8, 2011
since I upgraded to F15 I noticed that "su -l" is very slow, it takes about 20sec before it gives the prompt. I traced it down to a problem with "xauth" as su asks for the authorization for the display running "xauth nlist :0" which times out with an error. Actually, the command "xauth nlist :0" by itself gives:
xauth: timeout in locking authority file /home/user/.kde/tmp-host.domain/xauth-200-_0
If I put SELinux in permissive mode both command work without problem so I suppose SEL is the problem. I checked the permissions and settings of the file which is "unconfined_u:object_r:config_home_t:s0" but I have no idea if this is the right value, running "restorecon" on the file, directory or the whole /home/user didn't change anything.
View 4 Replies
View Related
Dec 20, 2009
Been trying to get nxserver running on 11.2 i386 at location A and keep getting an error on connecting from client at location B.
Code:
NX> 203 NXSSH running with pid: 6439
NX> 285 Enabling check on switch command
[code]....
View 1 Replies
View Related
Apr 27, 2011
I agree deleting .Xauthority files work, but thats not a good solution. I mean, everytime I have to run any X forwarding application I have to delete the .Xauthority file. Here is my scenarioThe applications that I want to run are on Linux Server [NFS] and the client machines [CIFS] that are having problem in locking theXauthority files are Macs which share the same domain as that of client solaris machine. i.e. The home directory of particular user on Solaris & the home directory of that user on Mac have same contents.When I ssh -X from Solaris to the server, everything works fine, no error messages.When I ssh -X from MACs to the server, I get the following warning messages.
Code:
/usr/X/bin/xauth: error in locking authority file /home/user/.Xauthority
/usr/X/bin/xauth is the path on the server. If I try to break the lock by sudo
[code]....
View 3 Replies
View Related
Jul 31, 2010
I need to compile "/usr/share/zoneinfo/" to a directory in /home/dir/ so I can use it in a program to find and assign a time zone to users (example: UTC +3 or similar) and I need all available cities and town in it. it seems I should be able to do that with "zic" but what I found and tried does not work. I needed examples and I found the only info giving examples comes from: [URL]... Trying the 2 first lines verbatim after creating the "test-tz" directory gives an error that was to be expected although I use the distro used in the example, this is because the directory "australasia" does not exist but directory "Australia" does.
[code]...
I should be able to extract the info mentioned above is correct?
View 1 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Sep 22, 2015
OS:Debian Jessie -- Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Apache version 2.4.10
IF i test the link http://localhost/123456789 , I can't find the message in /var/log/apache2/error.log
like : [Tue Sep 22 23:30:34 2015] [error] [client 192.168.10.177] File does not exist: /var/www/html/123456789
View 0 Replies
View Related
Aug 12, 2014
Install cifs-utils on wheezy armhf
apt-get install cifs-utils --fix-missing
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
View 7 Replies
View Related
Feb 7, 2011
I'm getting openbox up and running on squeeze. I performed a netinstall and did a simple apt-get openboxI need to modify a file called ~/.xinitrc, but it does not exist. I read that I can copy one over from /var/x11r6/lib/xinitrc, but the /x11r6/ directory doesn't exist either. I've installed xorg, but the directory still eludes me. A package search yields nothing useful. I am using the SLiM display/login manager, which I believe calls startx, which should theoretically generate the ~/.xinitrc file.
View 2 Replies
View Related
Nov 3, 2010
fakeroot debian/rules clean dh clean dh_testdir i met error after "debuild -S", did anybody meet the same issue?
[Code]...
View 1 Replies
View Related
Nov 15, 2010
-the command to copy the file Practice.txt to a new name of Myfile.txt while in the home directory-found
-command to create a directory in the home directory-found
-say i just created a new directory called "test". whats the command to delete the test directory.-found
-command to create a blank, text file without using an editor.
-the exact syntax in Linux you would need to rename the file to a new name-found
View 4 Replies
View Related
Dec 7, 2010
I was using the following command to search for tmp files older than 15 days for deletionI used "ls -l" first just in case
Code:
find somedirectory/ -type f -ctime +15 -exec ls -l {} ;
then i noticed that occasionally i get a "No such file or directory" error
When I looked at the directory, the file was not there.How does "find" find a file that doesn't exist?Is it possible that the file can be deleted right at the moment after a file is found and before the command executed?
View 3 Replies
View Related
Jun 30, 2011
How would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1
img001.jpg
img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Code:
$ls /dir2
img003.jpg
View 7 Replies
View Related
Jul 17, 2011
My desktop just froze for some reason and I had to force shut down. When I logged back in I could not get into my /home/username directory, a message popped up that it does not appear to exist and if I would like to put it as root.
what should do to get it back?
View 1 Replies
View Related
Jul 3, 2011
I want to copy a file from an old directory to a new directory and ideally I would like that the 'mv' command itself could create the directory for me in one step...That is to say that the directory would not exist until 'mv' has been called as in:Code:mv olddirectory/file.dat newdirectory/file.datso mv would create the directory 'newdirectory' in the above call....I am not sure if this is possible however, that is to say I think it may be necessary that the directory 'newdirectory' already exists before I make the above call to mv, as when I make try the above call when 'newdirectory' doesn't exist I get the following error:Quote:mv: cannot move `test1/4215/4215-001R.fit' to `test2/test.fit': No such file or directoryso to sum up, my question is:is there some paramater for 'mv' that I can change so that it will create the new directory as well as copy the file and if not, are there other commands that might do this?
View 3 Replies
View Related
Jun 30, 2011
how to check two arguments whether it is a file and the other is a directory, check if files exist in directory and copy it if it is a newer version. Seriously i need idea to do tis, jst some simple sample wil do
View 3 Replies
View Related
May 10, 2010
i tried to create a if else statements or either an else statement I get a message saying that the directory exists (mkdir: cannot create directory `./MAY2010': File exists I am running this in a crontab file and I dont want any output telling me that the directory exists. I just want to check if the directory doesnt exist, create one else do nothing (not even a message telling me that the directory exists).
[Code]....
View 8 Replies
View Related
Oct 16, 2010
I think as a result of a script that started duplicating files in a loop, the allotted capacity on my VPS filled up with multiple nested copies of the same files... After a reboot, I could delete most of them, but got rm stalled in certain directories...
after isolating which ones, I found this: a directory listing that lists the files, and at the same time tells me they are not there!!!
partial listing:
Code:
ls
ls: cannot access userkey.php: No such file or directory
ls: cannot access workshop.php: No such file or directory
ls: cannot access quiz.php: No such file or directory
ls: cannot access webservice_rest.php: No such file or directory
[Code]....
View 5 Replies
View Related
Jun 12, 2010
in order to install OpenFOAM, I need to
> source ~/.bashrc
but I get an error file or directory not found...
View 6 Replies
View Related
Sep 4, 2010
I'm using rtorrent and have several torrents successfully downloaded with it. However I have one torrent that doesn't want to start downloading. At first it said
Code:
Could not create directory "./torrentdirectory" File not found
(or something to that effect). So I removed the torrent from rtorrent and tried to load it again after manually creating then chmod 777 the directory. Now it says
Code:
Could not open file "./torrentdirectory/torrentfile.avi" No such file or directory
I've tried searching on google and could only find a few posts about the problem, and those all appear to have tried chmod 777 but with no luck either
edit: weird, so I just nano torrentfile.avi, wrote the blank text, then chmod 777 and it started right up. So I guess this is solved lol
edit2: err the file started downloading but then rtorrent crashed > I'll try running it without screen this time so I can see why it crashed
edit3: well I restarted rtorrent and reloaded the file and after a hash check and being only 30% done it went ahead and finished the other 70%. I installed utorrent though aptitude but it didn't have put a ~/.rtorrent.rc file and rtorrent mentions this on startup. Could this be the reason for the issue?
View 1 Replies
View Related
Mar 23, 2011
Have Apache running on Ubuntu Server. Say I have a domain, www.somewhere.com, and I have uploaded a file, phpinfo.php. If I hit http://www.somewhere.com/phpinfo.php, I get my file as expected. However, If I hit non-existent file http://www.somewhere.com/phpinfo/somefile.dat, it also acts as if I hit phpinfo.php, instead of giving me a 404 error. It seems that because the DIRECTORY "phpinfo" does not exist, it decided that I must have meant to hit phpinfo.php at the root of the site.
If I create an empty "phpinfo" directory then it behaves as expected and gives me a 404 not found page. This is reproducible for any other file name you can think of. I'm sure this is some Apache convenience behavior but I would like to disable it (it is messing with some mod_rewrite stuff I would like to do). Because it's hard to describe I cannot figure out which Apache option it might be (whatever I Google for gives me completely unrelated results).
View 9 Replies
View Related
Nov 8, 2010
I just recently bought a second hand netbook (HP Mini Mi 110) from ebay which use linux ubuntu as OS. I changed the previous username to mine but when i tried to login again...this warning pop out "your home directory is listed as: '/home/mazlin' but it does not appear to exist. Do you want to log in with the /(root) directory as you home directory? It is unlikely anything will work unless you use a failsafe session" so i click yes. then...
user's $HOME/.drmc file is being ignored. This prevents the default session and language from being saved. File should be owned by user and have 644 permissions. user's $HOME directory must be owned by user and not writable by other users. next i click OK, then... your session only lasted less than 10 seconds. if you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. try logging in with one of the failsafe sessions to see if you can fix this problem. when i click ok, the login screen reappear again... how to use failsafe sessions.
View 7 Replies
View Related
Jan 20, 2010
When i try to share a folder from linux ubuntu desktop i am facing a problem a error reported are as follow:
loaded services file OK.
ERROR: lock directory /var/run/samba does not exist
ERROR: pid directory /var/run/samba does not exist
or i have no permission to open samba
View 1 Replies
View Related
Feb 16, 2010
Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?
View 1 Replies
View Related
Aug 28, 2010
new to ubuntu and linux, and using Lucid 10.04 LTS ok, i'm trying to get XBMC going, and following a nice step by step instruction on wiki.xbmc.org, but now i'm stuck at this step... In Ubuntu the SVN Repositories are not automatically added. You must add them manually. First, download the SVN Repo Installer from: [URL] Extract it to the ~/.xbmc/plugins/programs directory. If this directory does not exist, run XBMC one time and then exit back to Ubuntu. The directory should now exist.
i ran xbmc once (after the video driver problem was solved, though it messed up my dual monitors, gotta figure that one out yet.) i got the zip file, it's in my downloads. now my newbness really shows... i can't find an 'extract' command for gnome, can't find the .xbmc directory using the file browser, can't figure out how to hunt for folders instead of files, and don't know how to look inside folders i don't have permission to, that is, i don't know if there's a 'sudo' like option for the file browser. i've been searching the forums, but without the correct search terms, i'm wading in an ocean. i really want to give ubuntu an honest try, but i feel like a foreigner. EDIT: btw, up to this point, the forums have been invaluable, you all are great.
View 2 Replies
View Related
Feb 15, 2010
there are number of threads floating on installation of ns2..however i am unable to get it on my 64 bit system ns: error while loading shared libraries: libotcl.so: cannot open shared object file: No such file or directory
View 1 Replies
View Related
