Debian Multimedia :: 7.8 Startx - No Screens Found > Wlan0 Doesn't Exist
Apr 17, 2015
Installed Debian 7.8 KDE next to Windows 8.1.
Installed perfect perfect (except for network part). Grub came up, I selected Linux. After start up I typed
Code: Select allstartx
And I get the
Code: Select allFatal server error: no screens found
Also when I run
Code: Select allsudo iwconfig all I get is
Code: Select alllo    no wireless extensions
eth0Â Â Â Â Â Â no wireless extensions
Running lspci I get (vga for startx problem and network for WiFi problem)
Code: Select allVGA compatible controller: Intel Corporation ValleyView SSA-CUnit (rev 0e)
Code: Select allNetwork controller: Atheros Comm. AR9485 Wireless network adapter (rev 01)
View 6 Replies
ADVERTISEMENT
Nov 19, 2015
I tried to install NVIDIA drivers to my asus computer . When I rebooted startx did not launch.
These are the commands and source i used to install nvidia driver
Code: Select alldeb http://http.debian.net/debian/ jessie main contrib non-free
apt-get update
apt-get install nvidia-glx nvidia-kernel-dkms nvidia-xconfig nvidia-settings
nvidia-xconfig
shutdown -r now
Here is my log
Here is my lspci | grep -i vga
Here is my xorg.conf file
View 2 Replies
View Related
Mar 4, 2009
Just downloaded f10 last night. Install goes fine, but when I boot it goes to root command line. I enter in startx and recieve and error.
(EE)Unable to locate/open config file
(EE)open /dev/fb0: no such file or directory
(EE)No devices detected
Fatal Server Error:
no screens found
xinit: no such file or directory (errno 2): unable to connect to X server
xinit: no such process (errno 3): server error
View 4 Replies
View Related
Oct 18, 2010
I was trying to install the nvidia drivers then when I reboot all I get is a command line. Startx does not work, it says no screens found. I was dumb and uninstalled the nvidia drivers too not realizing my internet didn't work in the command line. I need to install the drivers from the live cd unless there is another way. I don't want to have to reinstall!
View 9 Replies
View Related
Jul 17, 2010
I've been looking for help on the #debian irc chan, this was my problem :when I startx, my two screens stop receiving any signal.I was using the vesa driver, so the guy told me to use radeonhd driver instead (I have a radeonhd graphic card)when using radeonhd driver, it tells me that no screen or monitor is found then he told me that I should install fglrx and that he couldn't help me for this
View 14 Replies
View Related
Apr 15, 2011
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
View 8 Replies
View Related
Feb 15, 2011
I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.
I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.
View 1 Replies
View Related
Jul 31, 2015
After upgrading from Debian Wheezy to Jessie, I figured out I needed to install the nvidia drivers in order to play some Steam games. Went to Debian wiki, installed drivers from there, rebooted, stuck in command line. I can't remember what errors did it give though. After a couple days of searching on the internet the problems and trying different things like purging everything nvidia and reinstalling the drivers in different ways and still no success I thought : Perhaps I installed the wrong nvidia drivers?
Did some research, found out that I might have an Optimus system ( from what I read, I have one because I am in possession of 2 graphic cards, an intel and an nvidia one . Installed Bumblebee, everything worked fine until I rebooted and once again, I couldn't move out of the command line. Tried to startx, error no screens found. Opened log, nothing wrong until it gets to the part of loading the nvidia module, which fails and tells me such module does not exist.
Looked into the module folder, there is no nvidia there. I'm also running a dual-boot Dell Inspiron N5110, with Windows 8.1, which I am currently on and Debian Jessie with GNOME.
View 8 Replies
View Related
Jan 9, 2010
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.
View 3 Replies
View Related
Jan 19, 2015
I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...
Here you have my output...
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck
[Code] .....
View 7 Replies
View Related
May 2, 2015
I am running a fairly new Debain Jessie stable installation with Xfce desktop. I need to use Xfce4 becuas the standard Gnome 3 does ot work when logging in with xrdp which I use becuase the actual box is headless.
I have an issue when starting synaptic. When I start it from the menu entry it just does not start. When I start from the terminal with
Code: Select allgksudo synaptic
I get an error box "Unable to copy the user's Xauthorization file" At the same time I can see in the terminal window a message
"Error copying '/home/userxxx/.Xauthority' to /'tmp/libgksu-SwcIe0': File or Directory not found".
I assume it is related to that I use a rdp session to connect, but I am otherwise clueless.
Code: Select alluserxxx@server2>xauth
xauth: file /home/userxxx/.Xauthority does not exist
View 2 Replies
View Related
Aug 17, 2010
I was just trying to get the now playing for banshee to show on conky but the way I was going to do it required me to make a wrapper for banshee.sh but I can't seem to find it or it doesn't exist.
View 4 Replies
View Related
Jul 4, 2010
mplayer complains about not being able to find libvdpau_nvidia.so. I checked in /usr/lib, and it's there, but it's a link that points to /usr/lib/vdpau libvdpau_nvidia.so. The folder vdpau doesn't exist.
Which package do I need to install to get this to work?
View 4 Replies
View Related
Apr 11, 2016
I have had to revert my VM to a previous image (did something to screw it up) anyway I have to reinstall icedove into my VM and I noticed after doing: sudo apt-get update && sudo apt-get install icedove that icedove can't seem to be found in the libraries anymore and simply wont install.
View 14 Replies
View Related
Dec 7, 2010
I've experienced 3 1/2 years of Ubuntu bliss. I have run into the first issue that I cannot solve using these forums, and I'm at my wit's end. Problem: I cannot start gdm (gnome?). I get the "Fatal server error: no screens found" error. Also, my terminal screen is duplicated on the top and bottom of the laptop monitor, indicating something gone terribly wrong.
When the problem started: immediately after running standard update to 2.6.32-26 (this time). Last time, it happened after running a standard update, but that was weeks ago. I did a complete reinstall (three times, including once to 10.1)
My system:
Ubuntu 10.04.1 LTS (clean install + recent updates)
Kernel version 2.6.32-26
Also have 2.6.32-25. Neither one works in recovery mode, either.
Machine: Dell Inspiron 1420
Intel Core2 Duo
Nvidia GeForce 8400M GS
View 9 Replies
View Related
Sep 20, 2015
I have been able to log into a tty[1-6] as root or my user, and then startx -- :1, while logged in as myuser and running X on tty7, , but this somehow skips my default desktop manager (GDM3) and boot straight into LXDE (with no menus!). In /etc/X11/default-diplay-manager I have: /usr/sbin/gdm3 ? How do I get startx -- :1 to start a desktop manager?
Related 2nd question: When I did the above startx -- :1, it would start the X session in the same tty (e.g. tty2) where I was logged in when running the startx command. It used to be (in older Linux versions) that startx -- :1 would start an X session on tty8 (and the default would be :0 on tty7). Is this the (new) way things are supposed to work?
View 2 Replies
View Related
Dec 21, 2015
I updated Debian system yesterday. I am getting black screen after I execute startx command. I am using system as server and manually boot into GUI mode whenever required.
View 10 Replies
View Related
Jan 27, 2016
As a long time FreeBSD user, I consider give Debian a try upon the arrival of my new laptop. However, seems I couldn't launch desktop environment by simply typing startx on console as on FreeBSD. I can start desktop through a display manager like lightdm on Stretch, which is quite easy and straightforward, but I still prefer the "startx way".
I setup Debian Stretch on Virtualbox (4.3.43) using official debian-installer, login as a normal user, and install xfce4 via Code: Select allsudo apt-get install xfce4. The installation of xfce4 was very fast and it also introduced xorg related packages here. Then I edit my $HOME/.xinitrc as follows:
Code: Select allexec startxfce4
I typed startx to expect Xfce desktop but got the errors complained instead: [URL]....
while the xorg.0.log had the following contents: [URL]....
So, I failed to start xfce4 by startx as a normal user and had to install and start lightdm to go into desktop, but when I login as root, it worked and launched Xfce4 by startx without any problem. I couldn't figure it out now.
View 6 Replies
View Related
Jan 25, 2011
I use Debian Squeeze and I have the following desktop environment installed: fluxbox, lxde, openbox and icewm. I make login in text mode and I start X using startx command manually in terminal. When I do that, fluxbox is loaded, because my ~/.xinitrc is configured this way:
#!/bin/sh
# fix dbus problem
eval "$(dbus-launch --sh-syntax --exit-with-session)"
# start session
exec startfluxbox
[Code]...
And "%session" is the variable value (fluxbox/lxde/openbox/icewm) chosen during the graphical login. This script works with Slim, but I want to login in a non-graphical mode. Could I use this script somehow to do a non-graphical login using startx? Is there some way that I could run startx with some parameter that it would pass the "%session" value to .xinitrc?
View 6 Replies
View Related
Jun 1, 2011
I rebooted my system about a few days ago to find that whenever X was started, my mouse and keyboard would not function. I am unable to even switch to another tty when this occurs, however alt+sysrq+r will allow me to switch ttys again.
Xorg.0.log
[ 70.287]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[code]....
View 11 Replies
View Related
Aug 28, 2010
Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?
View 2 Replies
View Related
May 30, 2010
i can't use kde because the startx and xorgsetup commands are not found (from root account). i know i installed x and kde, documentation doesn't say anything about specifying a path, locale and whereis don't show a path. what should i do?
edit: it also isn't found in /usr/bin/X11R6 or /usr/bin or /usr/bin/X11
View 4 Replies
View Related
May 9, 2010
I'm trying to install 10.04, but have hit a few bumps. The first time I tried to boot the live cd, the monitor frequency would go out of range. I fixed this by deleting the
Code:
ro quiet splash
from the end of the boot line, and replacing it with
Code:
ro vga=773 nomodeset
After booting with this modification to the kernel line, rather than booting into the live cd desktop, it takes me to a command setting. To try and get things moving I type
[Code]...
View 5 Replies
View Related
Oct 28, 2010
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
View 9 Replies
View Related
Oct 10, 2010
I downloaded the new gparted (6.4.1 I think) and when I try to run it from a live cd in the default settings it keeps telling me that it can't find my screens. I have an intel video card. I haven't had this problem with older versions of gparted. I suppose I could use an older version, but I'd like to know what the problem is.
View 2 Replies
View Related
Oct 14, 2010
Running Ubuntu 10.10 x64, fully updated kernel and stuff, in VMWare Workstation 7.
Before I tried installing the Nvidia driver, I set up all my stuff, settings, etc. Restarted several times, everything went okay.
I then decided to install the Nvidia drivers for my GTS 250. I first tried the manual install (sudo sh NVIDIA-INSTALL-NAME.run) and it failed saying something about the nvidia.ko or nvidia.so. I tried using this page http://ubuntuforums.org/showthread.php?p=9203671 to fix it, but it still failed, so then I used the automatic method (sudo apt-get install nvidia-current) and it installed fine, then I ran nvidia-xconfig and restarted.
The VM started up, but no GUI came up, instead, a black screen with a terminal (I think it's called a Virtual Terminal) came up and asked me to log in. I tried the command "startx" from there, and it told me no screens were found.
What can I try?
View 2 Replies
View Related
Nov 7, 2010
Some background to summarise, I have installed 10.10 clean over the top of 10.04. I did not have X/display problems on 10.04. After installing the Nvidia display driver for my device (Asus 8800GT - display driver: NVIDIA-Linux-x86_64-260.19.12.run) in order to get dual-headed display working under TwinView (as I had previously have used on 10.04 problem-free) I cannot reboot/shutdown my machine without a Fatal Error No Screens Found message appearing at boot time.I can hibernate, but this is less than ideal, especially after installing updates which require a restart. Every time this does happen I can re-run the driver installation and all is well again.Below are two copies of my Xorg log. The first is the erroneous log, the second the successful log. Below that is my xorg config file generated via nvidia-xconfig.
ERRONEOUS XORG LOG FILE
[ 29.712]
X.Org X Server 1.9.0
[code]...
View 9 Replies
View Related
Feb 7, 2011
I'm getting openbox up and running on squeeze. I performed a netinstall and did a simple apt-get openboxI need to modify a file called ~/.xinitrc, but it does not exist. I read that I can copy one over from /var/x11r6/lib/xinitrc, but the /x11r6/ directory doesn't exist either. I've installed xorg, but the directory still eludes me. A package search yields nothing useful. I am using the SLiM display/login manager, which I believe calls startx, which should theoretically generate the ~/.xinitrc file.
View 2 Replies
View Related
Dec 27, 2009
I previously used 11.1 with KDE 3.5. Since I have /home on a separate partition I decided to install 11.2 from scratch to avoid any conflicts with KDE 4 installing. No problems on first reboot and some updates were installed. Now at each boot I'm dropped into text login. If I try <startx> I get <no screens found> and /var/log/Xorg.0.log gives <screens found but none have usable configuration>. However if I add vga=952 at the boot screen (for a 1280x800 laptop) I get into graphical login and everything works well (yes even KDE 4). Below is an snip from /etc/X11/xorg.conf.
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 305 230
HorizSync 30-52
Identifier "Monitor[0]"
ModelName "1280X800@60HZ"
Option "DPMS"
Option "PreferredMode" "1280x800"
VendorName "--> LCD"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection .....
View 4 Replies
View Related
May 31, 2010
husam@ubuntu:~$ compiz setting manager compiz (core) - Error: Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager. compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1e000b4 (Mozilla Fi)Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. Now, if i close terminal, window's will be bugged .
View 3 Replies
View Related
