Debian Installation :: Unable To Install 7.6 On Kvm
Jan 21, 2016
Earlier , centos 6.6 & kvm was installed & over it debian 7.6 was installed & it was running fine.
Due to some issue we had to format the server , now we are able to install centos 6.6 & kvm but not debian 7.6. We are installing via media, from where can i download debian 7.6 iso.
we are installing it on hp dl 360 g9 server, we are able to format the disk inside the kvm & after when it start copy the operating system it throws error & error is Installation Setup failed, try run the failing item from the menu, I have tried the following
1. Replace the media & checked same error
2. Realter the partion & checked same error
3. Tried to install with guided partion & checked same error.
View 8 Replies
ADVERTISEMENT
Dec 23, 2015
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
View 14 Replies
View Related
Jul 20, 2011
I have unstable installed and wanting to play around with gnome 3 but I am having trouble. When I go to synaptic or terminal and try and install I can not find gnome 3. Here is my sources.list
[Code]...
View 13 Replies
View Related
Dec 19, 2015
I had downloaded Debian 8.2 (Jessie) below files all are checksum passed. During installation after the 'Select and install software' stage the process halts and unable to proceed further.
debian-8.2.0-amd64-DVD-1.iso
debian-8.2.0-amd64-DVD-2.iso
debian-8.2.0-amd64-DVD-3.iso
I get the following error.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation step failed
An installation step failed. You can try to run the failing item again from the menu,or skip it and choose something else. The failing step is: Install the system.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
View 13 Replies
View Related
Jan 30, 2011
I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
View 7 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Jul 31, 2011
I am running Debian testing on my box and iceweasel 5 with several addons. My question is the following: is there a way to export above all my addons settings to a file? I would like to be able to install on another debian machine the same iceweasel 5 and have the same addons installed (if I could have even the same toolbar it would be dream) automatically.
View 1 Replies
View Related
Jun 27, 2010
The aptitude install command and aptitude safe-upgrade do not complete for me. Whenever I run these commands, I receive many messages stating: insserv: Starting vpnagentd_init depends on rmnologin and therefore on system facility `$all' which can not be true!
I am using Debian Squeeze.
Here is the output for uname:
The end of my aptitude output is:
Here are my sources.list
What can I do to be able to install using aptitude once again?
View 8 Replies
View Related
Jul 16, 2015
For about the last 24 hours I have been unable to install any packages with APT. A connection to ftp3.nrc.ca can never be established.
1) Is this a problem on my end, or is this mirror down?
2) Is there a way for me to (temporarily) change mirror?
View 4 Replies
View Related
Aug 22, 2011
I have just undertaken my first install of debian after a couple years of using ubuntu. I used netinstall and have made a minimal install with wheezy and lxde. I am trying to install the ubuntu-font-family because it is so pretty!
1. I tried downloading the .ttf files, extracting them to a directory and using the program 'font-manager' (which I had used on ubuntu previously,) and it says they are installed but I can not access the font from any program.
2. I tried using fontmatrix, another graphical program. Same thing.
3. I tried installing the .deb package for the fonts after downloading from the ubuntu repos. still cannot use them. (but I can physically see the font files in the folder, same as with above methods.)3. i tried manually installing the fonts via the command fc-cache -f -v (after placing them in /usr/share/fonts, /usr/local/share/fonts, and ~/.fonts [none of which worked.]) After running the command 'fc-cache -f -v,' I run the command 'fc-list' and the fonts are still not in the list.
View 14 Replies
View Related
May 28, 2011
i am am unable to use apt-get install honeyd or any other software this give error like
- connect (111 Connection refused)
View 4 Replies
View Related
Sep 7, 2011
I am unable to install proftpd-basic:
The following NEW packages will be installed:
proftpd-basic{a}
The following partially installed packages will be configured:
proftpd proftpd-mod-ldap proftpd-mod-mysql proftpd-mod-pgsql
0 packages upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
[Code].....
View 1 Replies
View Related
Jan 23, 2011
I guess I am still a beginner since I can't do this. I was able to install Java in another computer successfully. I have both running now. The successful one, had a folder for firefox the one with the problem does not have that folder, (firefox). The instuctions I trying to follow are here: [URL]
Not having a firefox folder I installed using /usr/lib/mozilla/plugin . But the plugin has an X attached to the respective icon in /usr/lib/mozilla/plugins.
[URL] This website seems to offer the solution to my problem, I will need help in undoing my previous steps or in removing the incorrect plugin. But will I still need a firefox folder or directory as I have on the other machine? I have a K7S5A PRO MB and Athlon Xp 1800 + processor.
View 3 Replies
View Related
Aug 15, 2011
Cant install libfltk1.3.
apt-get install libfltk1.3
root@debian:/# apt-get install libfltk1.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
The following packages have unmet dependencies:
libc6-dev : Breaks: gcc-4.4 (< 4.4.6-4) but 4.4.5-8 is to be installed
E: Broken packages
root@debian:/#
I Have debian squeeze but i have install same programs from wheazy and sid reposity.i try to install fltk 1.3 from wheazy, sid and experimental reposity but none of the work.i want to try a program that use the fltk1.3 (dillo3) and cant becouse i cant install fltk 1.3!
I try to compile the fltk but this dosent work, the last text in the terminal was:
configure: error: Configure could not find required X11 libraries
./configure: line 11558: exit: aborting.: numeric argument required
./configure: line 11558: exit: aborting.: numeric argument required
make: *** [makeinclude] Error 255
How i cant install fltk-1.3.0
View 10 Replies
View Related
Jan 17, 2010
I am using Debian 5.0 (Lenny) upgraded from Debian 4.0 ( Etch). Being an upgraded install seems to make quite a difference in a number of areas as I am still running several applications which are no longer available due to lack of maintenance. I am running a number of applications that would simply not be available on a clean Debian 5.0 install.
I installed Adobe Flash 10 not from the Debian repository but using dpkg -i and the Ubuntu deb package from the Adobe website. The Flash version in the Debian repository was down level from the version I wanted installed. The install ran fine and the verification of flash in Iceweasel, Iceape, Chrome and the Gnome web browser all verified as version 10 on the Adobe web site.
Subsequently I discovered that Iceweasel was being misidentified as not running Flash 10 on a web site that required Flash 10. This was not happening with any of my other browsers. I looked in Tools/AddOns/Plugins in Iceweasel and found that Flash 9 and Flash 10 were both present. Disabling the Flash 9 plugin caused Flash verification to fail as if Flash were not on my system.
I did an apt-get remove flashplugin-nonfree which appears to have removed all traces of Flash 10. Now all of my browsers verify on the Adobe site as Flash 9 and work properly on all sites that require Flash 9 or lower. Looking in /usr/lib/iceweasel/plugins I see no flash plugin library at all. A Flash plugin library was in this folder until I did the above remove operation.
I do not understand how Flash 9 can be installed and operational and not have a library appear in the Iceweasel's plugins folder. Using dpkg -l as well as Synaptic I cannot seem to find a package to remove that would remove Flash 9.
Anyone know the name of a package I can remove to uninstall Flash 9?
Anyone know in what folder I might look for the Flash 9 library?
Anyone know if a fresh install of Iceweasel supports the automatic installation of Flash when visiting a web site that requires flash? This may well be how Flash was installed originally and part of the reason why I can find no reference to it in the expected folders.
View 6 Replies
View Related
Oct 8, 2015
I have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y
View 10 Replies
View Related
Sep 1, 2010
I'm using Epiphany. Some, but not all, Java apps are not rendering, that did render in Windows. I'm getting dialogue that says applet and Java plugin not installed.
View 5 Replies
View Related
Apr 27, 2011
I would like to install svn, but I am unable to install. sudo apt-get update gives me :
Ign file: eeepc Release.gpg
Ign file:/home/user/packages/ eeepc/main Translation-en
Ign file:/home/user/packages/ eeepc/main Translation-en_US
Ign file: eeepc Release
Ign file: eeepc/main amd64 Packages
Err file: eeepc/main amd64 Packages
File not found
W: Failed to fetch file:/home/user/packages/dists/eeepc/main/binary-amd64/Packages.gz
File not found
E: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get install apache2 gives me :
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apache2
View 8 Replies
View Related
Mar 17, 2010
I am a total Newbie in the matter of Linux installation and configuration and I just ran into my first major problem. I have a Dell XPS 720 with a Creative Labs Soundblaster X-Fi extreme Gamer Soundcard. But when I tried to set the Sound-Preferences, I got the following error message:"audiotestsrc wave=sine freq=512 ! audioconvert ! audiosample ! gconfaudiosink: Could not open audio device for playback."By now I know, why the system is unable to open the device, because during the installation of Debian (Lenny) the system recognized another "sounddevice", which is called SP2208WFP. That is my monitor with integrated webcam and microphone. And of course, it doesn't make a noise. So I have disconnected the USB cable to the monitor to avoid an automatic recognition (that costs me 3 important USB plugs) and I tried (now since 3 days) to configure the Sounblaster as the current sound device. But without success. lspci -v shows me, that there is a Soundblaster device:
02:04.0 Audio device: Creative Labs SB X-Fi
Subsystem: Creative Labs Device 6002
Flags: bus master, medium devsel, latency 64, IRQ 11
[code]....
View 3 Replies
View Related
Jul 16, 2015
I am unable to install matplotlib. I already have installed latest libfreetype and libfreetype-dev.But it still errors out on freetype, I am running Debian testing on my machine. Python is latest 3.5.b3 compiled from source and in virtual env , running the command :
pip install matplotlib
...... freetype: no [Requires freetype2 2.3 or later. Found ...] png: yes [version 1.2.50] ..... .....
* The following required packages can not be built: * freetype ....
Full error log here: [URL]....
I do not understand why requirement is not marked for compilation even though found.
View 5 Replies
View Related
Apr 2, 2010
I'm newb to Debian OS. I have ASUS X51RL laptop. I'm not able to install driver for my wireless internet that's called Atheros Communications Inc. AR242X 802.11abg Wireless PCI Express Adapter.
View 8 Replies
View Related
May 4, 2010
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
View 12 Replies
View Related
Mar 22, 2011
iam unable to install axel in debian 6.0 i386 while installing through Synaptic Package Manager its Saying that there is No package of "axel"
View 1 Replies
View Related
Jul 2, 2015
I have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies
View Related
Oct 27, 2015
got a lenovo B50-30 (no touchscreen) that came preeinstalled with windows 8. after installing debian im unable to boot windows , im not too great with grub configuration.this is what i suspect is the menu entry for windows in the grub boot menu .
Code: Select all### BEGIN /etc/grub.d/30_otheros ###
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda3
menuentry "Windows Vista (loader)" {
set root=(hostdisk//dev/sda,gpt3)
search --no-floppy --fs-uuid --set=root 8CA2-D25B
chainloader +1
}
here is info about the partition table (ive alocated / and swap part for debian nothing else. )
Code: Select allDisk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
[code]....
i would like to know how to configure windows to boot from the grub2 menu.
View 9 Replies
View Related
Apr 14, 2010
After my install I have no print control panel in the Gnome menu > System > Administration
What Packages do I need to install to be able to set up printers with the GUI?
View 2 Replies
View Related
Dec 19, 2008
I recently reinstalled Debian on my desktop to migrate to 64-bit. Everything was working swimmingly before but I've encountered a bizarre error i have never seen before. After installing the Nvidia driver and rebooting when X comes up it complains it cant find any screens. However, if I kill X and start it again it starts with no issues. I also have an odd message at startup which might be part of the problem as well.I'm running Debian Testing AMD64 with and Nvidia 9800 GTX+. I compiled 2.6.27.8 for the install.
For what its worth the Nvidia module is showing up for lsmod so I don't really know what is wrong. I have tried reinstalling the nvidia driver as well which didn't help. The error message during bootup is:
Code:
Loading kernel modules...Usage: modprobe[-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] [ --dump-modversions ] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
[code]....
View 5 Replies
View Related
Jun 14, 2010
I made a huge mistake. I was installing dtc-toaster in a Lenny box, and i accidentally closed the aptitude window. Then I opened another konsole (I have kde 3.5 installed), and I couldn't switch to root via "su" command. I can't remember the error message that i got, but it was something like "module not recognized".
Next i reboot the PC, and when I tried to login in tty1, system saids that root "is not a valid username". I had no better luck with other users.
As I'm not an experienced user, I really don't know where to begin. The good news are that starting in recovery mode seems to work.
I have no extra data by now, except that I ran fsck (from a System Rescue CD) on the lenny root partition, and it found no errors.
View 3 Replies
View Related
Aug 9, 2010
I noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
View 11 Replies
View Related
