I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?
View 2 RepliesI am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code:
Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso
and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
Code:
Select all~$ md5sum debian-8.1.0-i386-netinst.iso
095a83b715e1b74b6d30b2259275f4af debian-8.1.0-i386-netinst.iso
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code:
Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum
645120+0 records in
645120+0 records out
330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s
095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
Tried to install Jessie RC1,but installer hangs on formatting the partition,at 33%.
View 7 Replies View RelatedI have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
I am trying to clean install Jessie 8.3.0 onto an old PC, where I already have wheezy 7.7 working. I am using the 3 DVD- i386, which passed the integrity check.
Installation goes on smoothly till completing the "Select and Install SW" stage from 1st and 2nd DVD. At this point I get the warning that "Installation step failed, ..", giving the choice to repeat.
When repeated, the process gets completed (without asking for 2nd DVD), the new installation boots normally, but the KDE desktop opens irregularly, with some basic applications missing, and some flaws during certain operations.
The APT does not show any missing/broken link. I tried and repeat the installation with different choices as for kernels and/or desktops, but got the same result. I cannot guess where the problem originates, nor whether it is a known bug of the installer.
I've just decided to downgrade from 64-bit to 32-bit Ubuntu. I created a live USB from the most recent (as of today) 11.04 download, booted up, and selected the option to replace Ubuntu. (Also on my HDD are a Windows partition and a shared partition for documents.)The installer hung at the timezone select page - and, foolishly, I hard-restarted the PC. I can get into 'try Ubuntu' without problems, but every time I try to actually install, it hangs. I can't boot into Windows, since GRUB seems to have been overwritten in my failed partial install. (I can get to a 'grub rescue' prompt, though.)
I suspected it might have something to do with my internet connection - I need to go through a university proxy script, so I'm not sure whether the installer will actually have internet access, even after I've been able to apply proxy settings while running Ubuntu from the USB.
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
For some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
View 5 Replies View RelatedSo I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedI'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.
View 4 Replies View RelatedI have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.
For example, something, it fails at the following:
[ OK ] Started LSB: REP portmapper replacement
[ OK ] Reached target RPC Port Mapper
Starting LSB: NFS Support files common to client and server
Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.
I had downloaded Debian 8.2 (Jessie) below files all are checksum passed. During installation after the 'Select and install software' stage the process halts and unable to proceed further.
debian-8.2.0-amd64-DVD-1.iso
debian-8.2.0-amd64-DVD-2.iso
debian-8.2.0-amd64-DVD-3.iso
I get the following error.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation step failed
An installation step failed. You can try to run the failing item again from the menu,or skip it and choose something else. The failing step is: Install the system.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
what's going wrong? :S:S
View 3 Replies View RelatedI installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.
After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.
I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.
Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.
I have just Upgraded debian wheezy to jessie but after upgrading , the gui seems to flicker areas of gui are not repainting on closing applications ,windows do not render properly.
View 5 Replies View RelatedHow to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.
So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.
lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
[Code] ....
I installed the 32 bit version of Debian Jessie (8.0) on an Asus X205TA. The Asus X205TA laptop is quirky like a lot of Intel Baytrail Atom laptops/tablets in that it has 32 bit EFI but a 64 bit capable CPU, and installing Linux on them is an exercise in frustration. Jessie is probably the first distro to support 32bit EFI out of the box, and the install went surprisingly smoothly. As expected the sound and built in WIFI does not work, but everything else seems to work well.
I spent half a day compiling the 4.03 kernel but it crashes on boot, and I ended uninstalling it in frustration.
Is there any backport of the 4.0 (or 4.1 which is currently a release candidate) for Jessie? Debian also seems to have pulled the kernel image off of their "experimental" repository.
[URL] ....
I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.
I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?
I have a new installation of Debian 8.3.0 Jessie which I have been playing with and enjoying for a couple of weeks. Ever since I installed the operating system to my computer, I have noticed a few different programs just won't open. For example Nepomuk Back Up and Nepomuk Cleaner. I do not know if these programs shipped with the original installation or if they got installed with a package later, but when I try to open these applications the ball just bounces for a minute then disappears. I went to my package manager and uninstalled these applications and then reinstalled them, but there has been no change in behavior. Gparted also does the same thing, but with Gparted the little ball bounces for quite awhile before it disappears.
View 14 Replies View RelatedI'm just trying to install a Jessie i386 image in Oracle Virtualbox.
My host specs are:
Windows 7 Home Premium x64
Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.
When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..
I just installed Jessie amd64 for the first time. Few problems so far, but Alt-F2 to Alt-F6 no longer switch to another tty - there's just a black screen with a flashing cursor that doesn't respond to keystrokes. I rely on being able to switch between ttys a lot, so this is inconvenient.
I've searched and found a workaround for grub2, but I'm using grub-legacy (and don't want to switch to grub-pc as it's over complicated IMO). Graphics hardware is AMD 780G/SB700 (using firmware in firmware-linux-nonfree).
I have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?
Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
[code]....
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies View RelatedI was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all <variant>
<configItem>
<name>accentsFR</name>
<description>English (UK with french accents)</description>
</configItem>
</variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
I am doing a new Debian install on an older Dell laptop (Latitude D520, but that should not matter). I downloaded the net install .iso, burned it to disk, and ran it. Everything was progressing like any other installation I have done until I was asked to pick the mirror. I chose ftp.us.debian.org like I normally do and it was rejected. When I checked the output on virtual console 4, I am seeing the message "mirror does not support the specified release (jessie)."
I tried a bunch of random mirrors, including international ones, and they all give me that message.
Somehow got it partly to work. I have a new installation and I am using the 4.1 kernel now. I can switch on the Radeon chip which is great, but still have some trouble when trying to turn it completely off.
I have an Acer Aspire 4820TG Laptop with:
Core: i7-640M
integrated graphics: Intel
discrete graphics: Radeon Mobility 5650HD
I have installed Debian Jessie. After installing the non-free firmware for my ATI chip (following [URL] .....) so I could use vgaswitcheroo, the system broke.
The problem looks as follows: When I start the system the graphical login screen gets stuck and the console tells me first:
Code: Select allradeon 0000:01:00.0: Userspace still has active objects!
then a lot of numbers, then
Code: Select allradeon 0000:01:00.0: ring 5 stalled for more than 10000 msec
[drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
[drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
and this repeats once (or twice?) until several new messages arrive.
Those pause at
Code: Select allFixing recursive faul but reboot is needed !
Then again lots of more error messages until the everything freezes, with the last message
Code: Select all---[ end trace 13dfd971ff8e0aed]---
(Might contain typos. I don't know how to get the whole messages since the system dies a minute after booting and I only have a few seconds after the error messages start)
Even when I prevented the xserver from starting at boot I still got the same problems.
I would very much like to be able to switch between my chips, because I can only use external monitors when the ATI chip is active, but I would also like to be able to use the battery saving internal chip option.
I also tried to install the proprietary driver (though I would prefer if I didn't have to do that), but I couldn't get the xserver to work while it was installed.
lscpi output:
Code: Select all00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code] ....
is it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
View 2 Replies View RelatedI had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -
Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)
The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:
[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios
How can I make it boot up like others?
I have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.
I have tried the following simulation command, but it gives the error message shown:
Code: Select all~# apt-get --simulate -t stretch install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources
The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:
/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf
What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.