I have just installed Lenny but I can not see any graphic Desktop. I got only a movil window with the message:Input not supported. Because of it I think the resolution my screen is not fixed right.I tried to re-configure with:# dpkg-reconfigure xserver-xorgbut I can not reconfigure the screen.
View 2 RepliesSo I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I want to install debian 7.7 to a laptop with encrypted LVM, but some how i can't install inside the LVM a separate /home and swap partition. Graphic Installer says i cannot change anymore after i made a encrypted LVM. When i make the separate partitions before making an LVM, i can encrypt them but i have to enter for every partition my passphrase. How I can create a LVM with /, /home and swap without entering three times my passphrase.
View 7 Replies View RelatedHowever I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies View RelatedIn Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedCan we enable or install 3d Graphic effects on Debian(5.05 Lenny) Gnome Desktop.
Like ..what we see in Open-SUSE(desktop effects,3d workspace-switching,etc....)
can it be installed in Debian to look different.
I've seen some desktop screengrabs which have included a transparent graphic (usually in the upper right corner of the screen) that displays current system information such as the hostname, kernel revision, CPU utilization, etc., that is constantly updated.Is that something that is available from Debian? I would like to install it to check it out, if it's available.
View 5 Replies View RelatedI installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies View RelatedI'm attempting to install CentOS 5.3 on my IBM IntelliStation Z Pro 6221/37G, powered by some extra equipments as nVidia NV44 GeForce 6200 video card, MV88SX6041 SATA II Controller, 2x1GB DRAM.
The problem: CentOS 5.3 DVD i386 didn't install, the screen becomes unreadable because of vertical bars just after anaconda start running. Choosing at boot time different "linux resolutions" did not help, as well as the "text mode" still useless because Logical Volumes need to be created/handled and the graphical interface is mandatory.
Same result booting CentOS 5.2 Live CD. This sounds really strange to me. I checked iso images against their md5sum and are ok. Centos 5.3 x86_64 does not boot yet :"Your CPU does not support long mode", evem they are 2 x Xeon 2.8GHz / 512KB
I've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
I have recently installed 9.10 on my pc. All seems ok except there is a lot of noise coming from the tower now. It sounds like one of those old dial up modems that computers used to have. It starts right after the ubuntu starts. On the first install I had vertical lines on the screen that would become more broken the busier th computer was.So I installed again selecting to use lower graphics mode before installation. The lines have gone but I can't use avant window navigator as I get an error message saying the screen hasn't been composited. It invites me to use compiz to do this but a really can't see how.Also it won't let me select visual effects in appearance preferences. The most annoying thing is the noise like an old modem is constantly trying to connect to the web.
View 1 Replies View RelatedI'm having problems installing 10.04 on a IBM Thinkpad R51. It boots fine, loads the graphics... saying "UBUNTU", and below are some dots red/white moving... then it all goes BLANK... silent.. nothing happens (probably waiting for user imput?)
I've tried getting out of "normal" install by hitting ESC key, and selecting noapic and noa..p..l something?
No improvements.
I am trying to install Ubuntu Server on a tower with no graphic output (no graphic card, no graphic on the motherboard). Then, I�ve solved two ways:
1. (What I wanna try): Take a graphic card "rent", just for the installation. And remove it after.
2. Take the Server HD and install it on another computer, then replace.
I'm using Ubuntu 11.04. I should have two graphic cards, and they are both detected in the terminal.
Code:
lspci | grep VGA
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200] [10de:084b] (rev a2)
03:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400GS] [10de:10c3] (rev a2)
Both cards have monitors plugged into their VGA ports, but only one of the monitors shows a display. The other monitor goes into power saver mode right after start up. Nvidia X Server settings only shows a single graphics card (the 8200) and a single monitor (detect monitor finds nothing). Going through Prefences: Monitors also only shows a single monitor and doesn't detect a thing when detect monitors is clicked.
Monitor one has 1440 x 900 resolution and I'm not sure what the resolution of Monitor two is supposed to be, but it displays rather nicely at being set to 1440 x 900.
Both graphics cards are detected and usable in Vista, but a quick switch of the plugs shows that only the 8200 is registering in Ubuntu.
Ideally I want to have a dual monitor set up, with one screen showing documents or pictures with the other using Gimp or Blender.
I've downloaded both Kubuntu and Ubuntu and tried to install them. Both methods (wubi and cd).However I encounter the same problem, I think it's a graphic crash because I see some patern of pixels right after it loaded.I've made a pic (here) using my phone.However this problem doesn't occure in Ubuntu 8.04 (8.04 because I ordered some CD at that time).An option would be to install 8.04 then upgrade till the latest, but I'm worried about encoutering the problem right after that.Some specs:AMD Athlon II X4 3.0 GHz2 GB RAM DDR2NVidia 240GT160 GB HDD
View 2 Replies View RelatedI'm sure you will laugh at me, however I do have to ask : is there a desktop environment at all in Jessie installation CD 1 , I mean the one I've downloaded here [URL].... , and to be precise this one [URL].... .
I've installed it in a virtualbox thinking that I'd see a Gnome desktop (assuming it is the default one and seeing that nothing was specified in the CD name), but there is no graphical environment at all, it boots to a console: dpkg -l finds no desktop components and there is no default display manager in /etc/X11 (of course startx only gets me another terminal, probably xterm) .
It should not be a virtualbox issue because the LXDE version there runs OK, I'm just a bit puzzled that no desktop environment at all is apparently installed even if I'm positive that I've checked that option during the installation: I've installed this CD without a network connection, but nevertheless, if the installer says "install a desktop environment" that's what I'm expecting to find...
I don't remember such an issue with Wheezy, in fact I only used CD 1 and there was indeed a Gnome desktop after installation - it's not a big deal, I'd just like to know if this is normal.
I have just installed Debian Sqeeze with xfce4 desktop and when i boot, i just get a terminal prompt ... and so i have to manually type startxfce to start the desktop ...
How do i do this automatically at boot?
I tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies View RelatedI had the following problem while i installed fedora on my machine: The boot record was normally read from the installation CD and the boot screen appear, (up to this moment my Graphic Adapter is going fine) then i select the first option (which is the default as well) to boot fedora from the CD, and suddenly my monitor inform me that there is no input signal. I think it might be some driver problem, but my adapter is pretty common i think (NVIDIA GeForce 9600 GT), so its not very likely.
Things i have to note:
1. My Adapter is working on my Windows installation.
2. I manage to install fedora by removing my GeForce 9600 GT and using the on board Graphical Card from my main board.
I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies View RelatedI have installed latest Nvidia driver from the official website i had no problem installing it ( i stopped gdm installed the driver and then restarted gdm ) but the problem is that each time i reboot my ubuntu 10.04 i lose the graphic configurations and i have just to reinstall the Nvidia Driver to make 3d acceleration enabled how can i solve this by installing the driver once and for all
View 1 Replies View RelatedI've just installed a driver for ATI HD 4850, and I have a huge delay while scrolling, or when entering a folder which contains more files.(While scrolling down/up, vertical lines go down or up slowly, refreshing the image, 1 line/time if I noticed well.. takes like 2-3 secs to 'clear' the image..) I'm a total beginner at ubuntu, so please reply in standard language, or explain what to do I don't know if I installed the ATI driver properly, I just found that guide on the net..
[Code]...
I am trying to install the game NetHack. I am having trouble installing the Vulture's eye graphic pack. How to do that? Any working link to a downloader.
View 2 Replies View RelatedDebian installer (if you use the DVD image) asks what desktop environment to install, and there is a checkbox there for "Debian desktop environment" which you can uncheck even if let's say some environment like KDE.
View 9 Replies View RelatedI'm going to install Debian on a friend's desktop. Since he lives far from me, I think that being able to administer his machine from remote would be nice. OpenSSH is supposed to do that, isn't it? Thus, I'm going to install OpenSSH server on his Debian, but - to avoid security holes - I'll write two scripts to start and to stop the OpenSSH service; he will run such scripts whenever I need to check his machine, to make OpenSSH server available only when needed. I'm also aware that disabling console access for root is better, and that I should log in as a regular user and then do "su".
View 10 Replies View RelatedI try install debian squeeze or sid to my notebook acer aspire timeline X 5820tI try mini iso and netinstall but isntallation not detect eth0 (Atheros AR8151 PCI-E gigabit ethernet) wlan0(Atheros 5B93 wirelles network adapter) is detected but not working.I try DVD http://cdimage.debian.org/cdimage/weekl ... -DVD-1.isourning is OK, but on boot edd: not reed sector and long numberError not configured file found or ......md5of burn dvd is ok, i burn it 2x, K3B, Brasero, burning is complete, check of burning files too but, not boot (I try boot on my desktop PC and its OK, but on notebook dvd not boot.
View 2 Replies View RelatedI have installed Debian Squeeze 6.0.1a i386 via download DVD image from [URL]. Eventhough I specifically selected "Desktop" from installation menu, only basic system is installed.
I have only 1st DVD, which I understand is sufficient for desktop setup. if I have missed any of the steps or any saperate installation is required.
i tried to upgrade my geforce fx5700 driver. After upgrading i cant login. Before the login screen appears there is a black screen and when i type it writes first "^[[4~" and then i can write and nothing happens. I have two options in the bootloader : Fedora (2.6.31.12-174.2.3.fc12x86_64) and Fedora (2.6.31.5-127.fc12x86_64). I am afraid to kill the second konfig.
View 14 Replies View Related