Debian Installation :: No Desktop Environment In CD 1?

Aug 12, 2015

I'm sure you will laugh at me, however I do have to ask : is there a desktop environment at all in Jessie installation CD 1 , I mean the one I've downloaded here [URL].... , and to be precise this one [URL].... .

I've installed it in a virtualbox thinking that I'd see a Gnome desktop (assuming it is the default one and seeing that nothing was specified in the CD name), but there is no graphical environment at all, it boots to a console: dpkg -l finds no desktop components and there is no default display manager in /etc/X11 (of course startx only gets me another terminal, probably xterm) .

It should not be a virtualbox issue because the LXDE version there runs OK, I'm just a bit puzzled that no desktop environment at all is apparently installed even if I'm positive that I've checked that option during the installation: I've installed this CD without a network connection, but nevertheless, if the installer says "install a desktop environment" that's what I'm expecting to find...

I don't remember such an issue with Wheezy, in fact I only used CD 1 and there was indeed a Gnome desktop after installation - it's not a big deal, I'd just like to know if this is normal.

View 10 Replies


ADVERTISEMENT

Debian Installation :: What Does Desktop Environment Checkbox Mean In DI

Aug 13, 2015

Debian installer (if you use the DVD image) asks what desktop environment to install, and there is a checkbox there for "Debian desktop environment" which you can uncheck even if let's say some environment like KDE.

View 9 Replies View Related

Debian Installation :: Remove Accidentally Installed "Desktop Environment"?

May 30, 2010

I recently started an installation of Debian Lenny. During the install, I accidentally chose to install "Desktop environment" when I meant to de-select it (I hit enter, which was obviously the wrong key to de-select) so what should I do now? Should I restart the install, and be more careful the next time the task selector comes up? Should I let it continue, and uninstall all the X stuff afterwards (and how would I remove ALL of the stuff installed with the "Desktop environment", 10GB hard drive

View 3 Replies View Related

Debian :: 8.3.0 - Can Change Desktop Environment After Install

Feb 17, 2016

I am new to Linux and I just installed Debian Jessie about a week ago. I have been tweaking it and learning the command line and all that, but I also have been reading and studying about different aspects of Debian that I was unaware of before I installed it. Because of my reading, I think that I would like to change my desktop environment. When I installed Debian, I consciously chose the Cinnamon desktop because I felt that the simplicity would suit my needs, but I have recently read about KDE and I think that it has some features that I would be interested in. Is it possible to change my desktop environment now, even though I have already installed Debian? If so, how difficult is it?

On a very closely related question, I do have an extra 60 GB partition just sitting there with nothing on it. As an alternative to the above scenario of changing desktop environments before I know exactly which one I will like better, I can make another installation of Debian on my free partition and run both Cinnamon and KDE side-by-side for a little while until I learn which one suits my needs the best.

View 14 Replies View Related

Debian :: Does Netinstall Include Desktop Environment?

Dec 16, 2010

if debian lenny is installed using a netinstall cd would it contain a desktop environment if no internet connection is available at installation?

View 2 Replies View Related

Debian :: Install Xen With Xfce Desktop Environment

Mar 4, 2011

i am trying to install xen on Debian with xfce desktop environment. The instruction for xen at the following link

[URL]

says it is required to do the following:

- The Linux hotplug system (e.g., /sbin/hotplug and related scripts. I have downloaded the package "hotplug-2004_03_29.tar" and uzipped the package. I have the following files/packages:

testusr@debian:~/Downloads/hotplug-2004_03_29$ ls
ChangeLog etc hotplug.spec mkinstalldirs sbin
debian hotplug.8 Makefile README
-------------------------------------

[Code]....

View 5 Replies View Related

Debian Multimedia :: How To Update Cinnamon Desktop Environment

Jul 9, 2015

I'm using debian with cinnamon desktop on a laptop with a second monitor. The panel (the bar where there are the application title bars with some system infos like battery status and clock) is only displaying on one screen depending if it is set as a primary screen. I wanted a way to get a second bar on the second monitor.

Ideally I wanted that each bar should display only the application which is present on that screen but this is completely optional. The most important thing I wanted is at least to duplicate the bar on the second monitor so I can check the clock and other infos..

First I thought that this should be only a little configuration problem.. But I rapidly understand that this is simply not possible. But I also discovered that the new version of the cinnamon desktop (2.6) have got many improvement and is that provide this dual screen options.

I then saw that my version of cinnamon is the version 2.2.16 (the version that is supported by debian). I went to the cinnamon website but I don't find any information on how to install this version.. All the information is related to the linuxmint distro.

View 1 Replies View Related

Debian Multimedia :: Select Multiple Desktop Environment Using Startx?

Jan 25, 2011

I use Debian Squeeze and I have the following desktop environment installed: fluxbox, lxde, openbox and icewm. I make login in text mode and I start X using startx command manually in terminal. When I do that, fluxbox is loaded, because my ~/.xinitrc is configured this way:

#!/bin/sh
# fix dbus problem
eval "$(dbus-launch --sh-syntax --exit-with-session)"
# start session
exec startfluxbox

[Code]...

And "%session" is the variable value (fluxbox/lxde/openbox/icewm) chosen during the graphical login. This script works with Slim, but I want to login in a non-graphical mode. Could I use this script somehow to do a non-graphical login using startx? Is there some way that I could run startx with some parameter that it would pass the "%session" value to .xinitrc?

View 6 Replies View Related

Fedora Installation :: Installing Desktop Environment (KDE 4) F12

Feb 25, 2010

I installed Fedora 12 on my computer using the install DVD and that worked fine. However, upon booting up, I was dismayed to find that all I could access was the command line where it says:
[root@localhost~]#

So naturally I went searching and found that the problem was that no desktop environment had been installed. So I went to try to install KDE since I really like the way its screenshots worked and a number of my friends recommended it. I hooked my computer into my router(since I'm finding wireless on my machine is going to be tricky right now) and used yum to try to install the desktop. I found the appropriate code at [URL] to install with yum. I promptly did and allowed yum to do its thing, downloading and installing all the necessary files after which I went through the steps on the website.

The problem comes now, when I try to boot my new desktop environment from the command line. After entering "startx" I get the following error:
xauth: creating nw authority file /root/serverauth.1250
xinit: No such file or directory (errno2): no server "/usr/bin//X" in PATH
Use the -- option or make sure that /usr/bin is in your path and that "/usr/bin/X" is a program or a link to the right type of server for your display.

Possible server names include:
Xorg Common X server for most displays
Xvfb Vertual frame buffer
Xfake kdrive-based virtual fram buffer
Xnest X server nested in a window on another x server
xephyr kdrive-based nested X server
xinit: Server error.
How to get the startx command to work. Or maybe I'm not even supposed to use startx...

View 3 Replies View Related

Ubuntu Installation :: Install X11 As The Desktop Environment

Feb 8, 2010

I recently had to get a new PC, I am left with one that while it doesn't do what I needed to, still works just fine so I would like to turn it into a barebones file server. I could do this under Windows, I have an old copy of W2K server install I got from my networking class... but I'd rather do it via Ubuntu.I know there are automated install options but I can't figure out how to make use of them. All I need to have it do, is on install:Install X11 as the desktop environment (lightweight, resource friendly).Install VNC to allow me to remotely administer the server and fine-tune any configurations Setup up the NIC so I can obviously network it.

If there's a way to strip off the extra programs (ie: games, office software, graphics editors, etc), that'd be fine. I'm unsure if I want to do any media streaming (specifically of music, unsure if the onboard graphics is suited to video)I don't have a spare monitor to hook this up with, and I want to stash this machine in an out-of-the way place where it won't be noticed.Can anyone help me or point out an 'idiot's guide to automated installing Ubuntu' by any chance?

View 1 Replies View Related

Ubuntu Installation :: Cannot Get Back To The Desktop Environment?

Feb 13, 2011

I just set up a new PC with a copy of 10.04.2 from the disk that came with "The official Umbuntu book" This morning it prompted me to run updates so I did; now I cannot get back to the desktop invironment. Tried F7, but it stops at "checking battery state."

View 1 Replies View Related

Ubuntu Installation :: UNR Graphics Glitch - No Desktop Environment

Oct 12, 2010

I upgraded the UNR from 10.04 (which worked ok) to 10.10. Now, if I log in with the UNR session I get a weird graphics glitch (see attached screenshots). The panels are transparent and all the icons are invisible, though drop-menus seem to work (see: Unity02.jpg). Also, the side panel is transparent and does not display any icons (see: Unity01.jpg)

My system: MSI s420 laptop
video: radeon xpress 200M
cpu: dualcore intel of some sort
ram: 2 GB

View 2 Replies View Related

Ubuntu Installation :: KDE 3.5 - Remove Gnome Desktop Environment?

Nov 26, 2010

I am using ubuntu 10.04, I want to know if I can change to kde 3.5 and remove gnome desktop environment.

View 1 Replies View Related

Ubuntu Installation :: Desktop Environment (gnome) On Server 11.04 - Setup A Graphical App?

Aug 2, 2011

I install ubuntu server 11.04 I select ubuntu server from boot menu then enter username and password and then i see a command line line and a black background How i can setup a graphical app (some thing like genome) for my server I do not know any thing Any body can explain all step of this for me how I connect to internet how download graphical app and install it? (I connect to web with windows 7 and adsl internet)

View 6 Replies View Related

OpenSUSE :: Lost KDE Desktop Effects Settings After Install Gnome Desktop Environment

Jun 6, 2010

I installed Gnome desktop environment recently then ;I' ve lost KDE desktop effects settings. I just can see Compiz Configirator. I cant configure effects independently. There is same settings in gnome and kde. And also I cant change windows appearence.

View 4 Replies View Related

General :: Desktop Environment As Root - Files Created By The Desktop That Could Compromise The System

Jul 20, 2011

a server at work has been accessed through the desktop environment as root. I know this is a risk and since I have never done it before I was wondering if there are any files created by the desktop that could compromise the system and how could I clean it up.

View 2 Replies View Related

Debian Multimedia :: "apt-get Install Gnome-desktop-environment"?

Mar 19, 2010

I have a problem with my server. When i try to "apt-get install gnome-desktop-environment" it comes out with a failure. When i try to apt-get -f install it comes out with this

ks365539:~# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done

[Code]...

I heard that it is possibly because I have Lilo on my server, instead of grub. How do I make the desktop-base work?

View 1 Replies View Related

Debian Installation :: 4.0 Freezes After Environment Selections?

Jan 19, 2010

I've tried this with 4.0r3 and 4.0r7 CDs, using two different networks to access repositories, and the same result each time: install goes fine until the "OK" for the "Desktop/Web Server/Mail Server/etc." selections, it brings up the "Select and install software" page and then it freezes, showing "5%" and "Please wait..." under the progress bar.

If I hadn't built 20+ servers this way I'd think it was me, but it's not... I think. What's going on?

(No, we're not upgrading to 5.0. Reference above mention of lots o' servers! )

View 3 Replies View Related

Debian Installation :: Can't Install Gnucash 2.4.7 On 6 Xfce Environment

Jul 8, 2011

I can't install gnucash 2.4.7 on Debian 6,xfce environment with did not install the gnome environment

View 4 Replies View Related

Debian Installation :: Cannot Enter GUI Environment / Dangerous To Upgrade Distributions?

Jan 26, 2010

I just use apt dist-upgrade from stable lenny to testing squeeze, however, after upgrading i just cannot enter GUI environment, is it dangerous to upgrade distributions?

View 9 Replies View Related

Ubuntu Installation :: Install Debian Testing / Minimum Gnome Environment?

Apr 4, 2010

I wanted to check it out.I want to install the minimum gnome environment.

View 7 Replies View Related

Ubuntu :: Best Desktop Environment For A Old Pc?

Nov 25, 2010

what best desktop environment for a pentiun iii 1GHz, 256 Mb RAM and 64 Mb of video card. Like Gnome, KDE, Fluxbox, Openbox, Blackbox, XFCE or other, don't care if have or not menus or docks, I need it became fast and can see videos not in slow-motion.

View 4 Replies View Related

General :: Best Looking Desktop Environment?

Mar 13, 2010

I heard Enlightenment is one of the best looking desktop envioronments.

And KDE can be very amazing if you install a rendering engine on it.

View 5 Replies View Related

Fedora :: 12 Hangs In 3d Desktop Environment?

Jan 23, 2010

Initially I have A system with XP sp3,1GB RAM and 250GB Hard Disk,Intel Dual Core Processor 1.8GHz. After I Installed Fedora10 with dual booting option. Till now everything is fine.. After I updated the Fedora10 to Fedora 12. Fedora 12 is hanging in 3d Desktop Environmnet.It is working well in normal Desktop environment..

View 6 Replies View Related

Fedora :: Change Desktop Environment?

Apr 24, 2010

i got my fedora 12 cd today. only thing is, i got the KDE version instead of the gnome version, which i want for software compatibility reasons. if i install the KDE version, how do i go about uninstalling the KDE and switching over to gnome

View 7 Replies View Related

OpenSUSE :: GDM - How To Switch Desktop Environment

Dec 31, 2008

How do you change the GDM theme? Also how do I switch desktop environment. I installed both kde and gnome with the installer but at the login screen there is no sessions button

View 9 Replies View Related

OpenSUSE :: Which Desktop Environment Is Better Between Kde Or Gnome?

Jan 10, 2010

I would like to install opensuse 11.2 on my children's new pc with nvidia 7025 graphic onboard card. which desktop environment is better between kde or gnome? I haven't a preference yet but I wolud like to install a light graphic system that can be used by a child of 5 yo.

View 9 Replies View Related

OpenSUSE Install :: Can Keep Two Different GUI - Desktop Environment ?

Jun 14, 2011

I am using openSUSE 11.4 with two different desktop environments(gnome and kde).is this good?

View 4 Replies View Related

Ubuntu :: Way To Change The Desktop Environment ?

Jan 12, 2010

Now I know this is an Ubuntu forum, but my question is really for Linux distros in general. An obvious newbie to linux, I was just wondering if I could change the default desktop environment that comes with distros: for example Ubuntu comes with GNOME. There is a way to change that to something like, for example, xfce or Openbox right? Or are these environments set for each distro?

View 1 Replies View Related

Ubuntu :: Use A Mono App As A Desktop Environment?

Apr 19, 2010

I have a shell I have written in C# for Windows. I have ported it over to Linux (Ubuntu) and it works well as an app running under Gnome.

What I would like to know is how to use the shell I have written instead of Gnome? What I want is a way of booting straight into my custom shell without the default desktop environment loading.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved