Ubuntu Installation :: Graphic Crash When Installing?
Jul 9, 2011
I've downloaded both Kubuntu and Ubuntu and tried to install them. Both methods (wubi and cd).However I encounter the same problem, I think it's a graphic crash because I see some patern of pixels right after it loaded.I've made a pic (here) using my phone.However this problem doesn't occure in Ubuntu 8.04 (8.04 because I ordered some CD at that time).An option would be to install 8.04 then upgrade till the latest, but I'm worried about encoutering the problem right after that.Some specs:AMD Athlon II X4 3.0 GHz2 GB RAM DDR2NVidia 240GT160 GB HDD
View 2 Replies
ADVERTISEMENT
Jul 27, 2010
I try to boot up Ubuntu.It seems like everything goes on as normal (I can tell from sounds), but the screen becomes just a jumble of randomly colored lines (see photos; I couldn't get screenshots for obvious reasons).I also included some info about my computer (see pic), but I don't know anything about my graphics card, how do I find that?
P.S. I just installed a fresh version of 10.04 Lucid (dual-boot with WinXP), and as far as I remember, I haven't changed any settings or even installed any software yet!
View 2 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
May 31, 2011
While I was installing screenlets via
Code:
sudo apt-get install screenlets
My pc restarted due to electricity cut off! and now when I try to re-install I get that error in terminal
Code:
dpkg: error processing python-numpy (--configure):
dependency problems - leaving unconfigured
[Code]....
View 3 Replies
View Related
May 17, 2011
i was about to install fedora i had checked first and then when i reenter the disk to install it on hdd it shows me gnome bug error and some kind of crash but the desktop was ready with 2 bug it says gnome crash and other i didnt remember ..so what you say , should i install using that cd or i have to recreate a cd with fedora 14.i m using win7 already i wanna dualboot
View 6 Replies
View Related
Jan 2, 2010
I was multitab browsing (around 15 tabs) in latest firefox for karmic koala (9.10) and at the same time downloading (probably already auto-installing) in synaptic-package-manager the package: textlive-fonts-extra (and other necessary packages; this was around 90 mb download and 250 mb installation)suddenly the pointer doesn't move anymore, (Alt+tab , and other combinations also didn't work anymore)
and I hold the power button untill the computer is turned off,when I reboot I get this message"invalid system disk, replace it and press any key to continue"now I'm using a livedisc to boot the computer (jaunty 9.04)To rebuild the system i think to manually install the packages that probably were interupted while installing and made it not work anymoreThe packages to be installed when text-live-fonts is marked for install (in synaptic opened from the livedisc) are:
dvipdfmx
lmodern
text-common
texlive-base
texlive-base-bin
[code]...
This may be different with 9.10 configuration (can anybody look to see which are necessary with 9.10) I think the computer wasn't responding anymore because I used too many tabs at ones. I had this same problem a few times before in the past weeks but then I wasn't installing something and the computer did restart and firefox restored all the tabs. I cannot enter /home/ from the livedisc (no permission) and it's necessary , I am in the middle of exams and i need to print the paper that is on the disc by monday Is there a way to enter it via command console?
View 2 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Jun 22, 2010
I was installing supertux for my daugter, which doesn't apparently have a yum repo, I'm pretty sure I had the right rpm. Anyway, I got a hard-boot/crash in the middle of install, and now she's bricked. I had alot of configuration done on the box that I'd rather not redo. Where do I start debugging it? If I hammer on ctrl-alt-F1 on boot, instead of hanging on the "f", I see all the services start, then I get a (literally) blue screen with a blinking cursor at the bottom, and a ctrl-alt-F2 will get me a login screen, whereupon I can 'startx', but all the applets on the gnome panel are missing, so the thing is clearly fubar.
I've alot of freeBSD experience, but it's alot more nuts&bolts than fedora (and it's laptop support is total crap). I have no idea how we get from boot->gdm normally, or where to start looking for which .so's or whatever got hammered...
View 10 Replies
View Related
Jan 2, 2010
mother board- M2A-MX
Chip-set- Ati x 1200
cpu- AMD 5600+
i am new to linux
I'm trying to run the 'ati-driver-installer-8.20.8-i386.run' program to install [URL]..
View 2 Replies
View Related
Oct 24, 2010
ATI Radeon HD 4350 256MB DDR2
Product id: 11142-08-20R
After struggling for days with trying to install with GUI - did not work Tried installing with "linux text" - installation went through - but I get no Centos GUI logon/desktop Tried installing with network installation - installation went through - but I get no Centos GUI logon/desktop Even tried making CentOS - USB pens, installing from, and booting from.... without luck. ...then finally, I got some "smileys"...
Solution:
I downloaded the ATI package for the card;
[URL]
I installed this;
sh ati-driver-installer-10-10-x86.x86_64.run
...and then I rebooted.After boot, I only got terminal (tty1) and I did:
"startx"
NOW - i finally got GUI But the whole problem seems to driver support for new graphic cards.So what I did was actually find an old card, Radeon 7000, installed this.. I got the Centos installation - GUI, installed gnome and ...
View 3 Replies
View Related
Oct 28, 2010
I have an ubuntu PC with 512 MB ram and an 3d graphic card that can normally support Guild Wars on windows xp. I installed the game with Wine an the game opens, I can see my character menu but the problem is none of the 3D graphic parts works, I just see a black screen.I even installed directX.
View 3 Replies
View Related
Jan 7, 2010
I just downloaded and installed the latest version of Ubuntu on my laptop. After installing the drivers for the visual effects I restarted the computer, and now after the all black screen with the little white Ubuntu symbol in the middle the screen goes blank, lots of horizontal lines appear and it contrasts out to a completely blank, white, useless screen. Any suggestions? EDIT: laptop is a Toshiba 5105, bumped up to 1.2gb of RAM
View 5 Replies
View Related
Jun 15, 2011
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
View 4 Replies
View Related
Feb 14, 2011
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies
View Related
Jan 22, 2010
I have recently installed 9.10 on my pc. All seems ok except there is a lot of noise coming from the tower now. It sounds like one of those old dial up modems that computers used to have. It starts right after the ubuntu starts. On the first install I had vertical lines on the screen that would become more broken the busier th computer was.So I installed again selecting to use lower graphics mode before installation. The lines have gone but I can't use avant window navigator as I get an error message saying the screen hasn't been composited. It invites me to use compiz to do this but a really can't see how.Also it won't let me select visual effects in appearance preferences. The most annoying thing is the noise like an old modem is constantly trying to connect to the web.
View 1 Replies
View Related
May 1, 2010
I'm having problems installing 10.04 on a IBM Thinkpad R51. It boots fine, loads the graphics... saying "UBUNTU", and below are some dots red/white moving... then it all goes BLANK... silent.. nothing happens (probably waiting for user imput?)
I've tried getting out of "normal" install by hitting ESC key, and selecting noapic and noa..p..l something?
No improvements.
View 6 Replies
View Related
Jan 3, 2011
I am trying to install Ubuntu Server on a tower with no graphic output (no graphic card, no graphic on the motherboard). Then, I�ve solved two ways:
1. (What I wanna try): Take a graphic card "rent", just for the installation. And remove it after.
2. Take the Server HD and install it on another computer, then replace.
View 6 Replies
View Related
Jun 10, 2011
I'm using Ubuntu 11.04. I should have two graphic cards, and they are both detected in the terminal.
Code:
lspci | grep VGA
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200] [10de:084b] (rev a2)
03:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400GS] [10de:10c3] (rev a2)
Both cards have monitors plugged into their VGA ports, but only one of the monitors shows a display. The other monitor goes into power saver mode right after start up. Nvidia X Server settings only shows a single graphics card (the 8200) and a single monitor (detect monitor finds nothing). Going through Prefences: Monitors also only shows a single monitor and doesn't detect a thing when detect monitors is clicked.
Monitor one has 1440 x 900 resolution and I'm not sure what the resolution of Monitor two is supposed to be, but it displays rather nicely at being set to 1440 x 900.
Both graphics cards are detected and usable in Vista, but a quick switch of the plugs shows that only the 8200 is registering in Ubuntu.
Ideally I want to have a dual monitor set up, with one screen showing documents or pictures with the other using Gimp or Blender.
View 4 Replies
View Related
Aug 1, 2010
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies
View Related
Sep 3, 2010
I have installed latest Nvidia driver from the official website i had no problem installing it ( i stopped gdm installed the driver and then restarted gdm ) but the problem is that each time i reboot my ubuntu 10.04 i lose the graphic configurations and i have just to reinstall the Nvidia Driver to make 3d acceleration enabled how can i solve this by installing the driver once and for all
View 1 Replies
View Related
Oct 1, 2010
I've just installed a driver for ATI HD 4850, and I have a huge delay while scrolling, or when entering a folder which contains more files.(While scrolling down/up, vertical lines go down or up slowly, refreshing the image, 1 line/time if I noticed well.. takes like 2-3 secs to 'clear' the image..) I'm a total beginner at ubuntu, so please reply in standard language, or explain what to do I don't know if I installed the ATI driver properly, I just found that guide on the net..
[Code]...
View 9 Replies
View Related
Jul 17, 2011
I am trying to install the game NetHack. I am having trouble installing the Vulture's eye graphic pack. How to do that? Any working link to a downloader.
View 2 Replies
View Related
Apr 16, 2009
I'm attempting to install CentOS 5.3 on my IBM IntelliStation Z Pro 6221/37G, powered by some extra equipments as nVidia NV44 GeForce 6200 video card, MV88SX6041 SATA II Controller, 2x1GB DRAM.
The problem: CentOS 5.3 DVD i386 didn't install, the screen becomes unreadable because of vertical bars just after anaconda start running. Choosing at boot time different "linux resolutions" did not help, as well as the "text mode" still useless because Logical Volumes need to be created/handled and the graphical interface is mandatory.
Same result booting CentOS 5.2 Live CD. This sounds really strange to me. I checked iso images against their md5sum and are ok. Centos 5.3 x86_64 does not boot yet :"Your CPU does not support long mode", evem they are 2 x Xeon 2.8GHz / 512KB
View 8 Replies
View Related
Apr 1, 2010
I have just installed Lenny but I can not see any graphic Desktop. I got only a movil window with the message:Input not supported. Because of it I think the resolution my screen is not fixed right.I tried to re-configure with:# dpkg-reconfigure xserver-xorgbut I can not reconfigure the screen.
View 2 Replies
View Related
Sep 5, 2011
However I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies
View Related
Nov 30, 2014
I want to install debian 7.7 to a laptop with encrypted LVM, but some how i can't install inside the LVM a separate /home and swap partition. Graphic Installer says i cannot change anymore after i made a encrypted LVM. When i make the separate partitions before making an LVM, i can encrypt them but i have to enter for every partition my passphrase. How I can create a LVM with /, /home and swap without entering three times my passphrase.
View 7 Replies
View Related
Oct 11, 2010
I've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
View 2 Replies
View Related
Apr 28, 2010
I did a text installation of the Minimal Install CD of 9.10 (Karmic) and wound up with a console only. I installed Icewm, how to boot to graphic (GUI) mode.
View 5 Replies
View Related
Oct 15, 2010
I don't understand how i should install the driver for my code...
View 2 Replies
View Related
