Debian Installation :: Safe To Install Dual Boot Windows 32bit
Jan 28, 2011is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?
View 14 Replies
ADVERTISEMENT
Ubuntu Installation :: Safe To Dual Boot Kubuntu With Windows 7?
Jan 19, 2010I really hate to ask this. I have been searching for almost 2 days for a comforting answer but still not satisfied. I have a new Dell Studio 1555 64 bit system with Windows 7. I really like running dual boot systems and this is my first W7 machine. Is it vaguely safe to attempt to install Kubuntu 9.10 on this system? It still smells new and I'd hate to wreck it this soon, LOL. The vast amount of info on this forum along with the sheer number of posts makes it difficult to sift through sometimes.
View 1 Replies View RelatedDebian Installation :: Cannot Boot Into Windows XP After Dual Jessie Install
Sep 4, 2015I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
Debian Installation :: Dual Boot - Install After Windows Is Already Installed
Jul 29, 2011how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies View RelatedUbuntu :: Does Having A Dual Boot System Effect How To Boot Into Windows Safe Mode
Apr 10, 2011I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedUbuntu Installation :: Is Updating On A Dual-boot Safe
Aug 1, 2011I have Ubuntu dual booted on the laptop I'm on, with Windows 7. I'm currently running 10.10. Is it safe to update Ubuntu to the latest version, despite it being on a dual boot? I'm not sure how it would work, but I imagine it'd be fine...I just wanted to double check first.
View 2 Replies View RelatedUbuntu Installation :: Cannot Install Or Boot 10.10 (dual Boot With Windows 7)
Oct 19, 2010I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedDebian Installation :: Dual Boot GPT UEFI - 8.2 And Windows 10
Dec 15, 2015I'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
Debian Installation :: Installing Next To Windows (dual Boot)?
Dec 13, 2010I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
Debian Installation :: Upgrading Windows On A Computer With Dual Boot
Aug 30, 2014I recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies View RelatedDebian Installation :: Dual Boot Windows And Linux Partitions
Dec 28, 2015I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
Debian Installation :: 8.3 And Windows 10 Dual Boot GRUB EFI Removed
Feb 3, 2016I've been using Debian for a few years but always on dedicated boxes and/or VMs.
Finally decided to dual boot Debian and Windows on my main Desktop PC.
Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.
The issue arrives when I reboot and load into Windows 10. It boots fine.
However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.
After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.
Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).
I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!
Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).
Debian Installation :: Dual Boot Problem Windows 7 And EeePC?
Feb 1, 2011I have used dual boot systems using various versions of windows and Debian for many years and have encountered no problems. However, I have a problem with installing Debian on a EeePC (ASUS PC1201) which uses Winows 7. I can not even get started because I can not understand the information that I have on my hard drive partitions. Windows 7 says that I have the following :
Local Disk(C:) 78.1 GB free of 99.9GB
Local Disk(D:) 49.8 GB free of 83.8.GB
NewVolume(G:) 948 KB of 0.99 GB
Local Disk(F:) 37.9 GB free of 38..0 GB
(Originally the ASUS only had two partitions C: and D: I used Gparted to genetate F: and G:)
gparted-live-0.7.1.5 says that I have the following :-
/dev/sda1 ntfs 992.5 KB
/devf/sda2 ntfs 100.00 GB with 66.09GB unused
/dev/sda3 ntfs 132.88GB with 129.88 GB unused
unallocated 1.00 GB
Debian Squeeze (the net install version) will not install. G was the result of trying to provide some swap space. How do I prepare the hard drive so that Squeeze it will install on F: ?
OpenSUSE Install :: Dual-boot Installation Of 11.3 With Windows 7?
Sep 29, 2010Yesterday (Sept. 28) I managed to install openSuSE 11.3 on my Toshiba Satellite Pro C650 laptop, side-by-side with Windows 7 which was pre-installed. In brief I'd like to report the problems I had encountered up to yesterday.
1. Upon inserting the DVD and after the start of the installation the system would take me to non-GUI (Text) Mode and would finally respond with the message: "No repository found."
2. After that I tried to install openSuSE 11.2 and 11.1. There, although the installation went through smoothly, I had to deal with a new problem; when I selected to boot Windows 7 from the grub menu the system responded with the message:
rootnoverify (hd0,1)
chainload +1
BOOTMGR is missing
Upon booting the computer from the DVD with the Linux OS and before I hit ENTER I changed the Kernel by hitting F5 (or whatever key corresponds to Kernel at the bottom of screen) to "Failsafe mode". That did the job. The installation started and ended smoothly. Oh! one other thing I did is to edit the preselected disk partition and delete the swap partition since the disk has to have four and not five partitions.After that, I became root and edited "/boot/grub/menu.lst" file to correct the "(hd0,1)" for the Windows 1 to "(hd0,0)" since it is the first OS.
OpenSUSE Install :: Dual Boot Installation With Windows 7?
Nov 5, 2010I am very much excited to try out openSUSE 11.3.. But i am very much afraid of losing my data in windows partitions without knowing the exact procedure to install it..here are my existing partition list... Please have a look at it and suggest me..
c : 40 GB
d: 120 GB
e: 140 GB
f: 140 GB
and i have some free space of 28 GB.It is unallocated.I want to install openSUSE into this free space.Now please tell me whether i can proceed with the default disk configurations given at the install time or do i have to modify and adjust the partitions or do i have to create partitions for the available free space.
Ubuntu Installation :: Windows 7 Dual Boot Grub2 Doesn't Install
Apr 26, 2010I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies View RelatedUbuntu Installation :: Windows Install Causing Dual Boot Quandary?
Jun 25, 2010I just bought a Fujitsu S760 with Win7 on it. I need it for testing purposes, but for everything else I use ubuntu. So I need a functioning copy of that Win 7. The problem is, they've spread it in 4 partitions all over the drive, and I don't know whether I can move any of that stuff around without blowing it up.
Here's the setup (all ntfs of course):
Code:
sda1 16GB (8 used) winOS files hidden partition...
sda2 200mb boot
sda3 150GB (12 used) winOS, program, and user files
sda4 150GB (3 used) some kind of recovery partition.
So, unless I move something, all 4 primary partitions are already used, and I can't even make an extended partition for my linuxOS. Plus, I like playing around trying to make hackintoshes, and that would take a primary partition too.And one more thing: on first boot, the Win7 talks to the mothership and completes its installation. So far, I've only used the machine with an ubuntu livecd (looks like everything works, btw), and I don't know how the drive will look once the Win7 is actually functional.Can I just dump that recovery partition? Unhide sda1, move boot there, ultimately make it bigger, and move the rest of the Win7 stuff there? Somehow, I doubt it.I know Windows checks for uuid (and MAC data??) to make sure it wasn't moved, so I haven't dared touch anything.
Ubuntu Installation :: Dual Boot - Can Install Windows On An Extended Partition
Mar 31, 2011I bought a PC with Window Vista on it as my partner needs it. Using gparted I set up Primary partitions for Vista OS (sda1) and Ubuntu OS (sda2), plus an extended partition for Vista files, Ubuntu /home and swap:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3969 31880961 7 HPFS/NTFS
/dev/sda2 3970 5294 10643062+ 83 Linux
[code]...
My problem is Vista (as always). The 30GB I allocated is not enough, even just for the OS and it won't now boot from GRUB, though I can see it from GRUB. I don't want to do anything that risks a problem for Ubuntu. Will grub still see both OS if I wipe sda1 (Vista OS) and reinstall Vista OS on the extended partition sda6? Ideally I would like to merge sda1 with sda6 and install Vista on that, but that looks way too risky / impossible.
Edit - There is another drive on the PC which is much larger and I use for backup. Is there any scope for installing Vista on that one so that GRUB still identifies both. Not ideal as I like having one as the backup for the other.
Ubuntu Installation :: Install It On A Dual Boot System With Windows Vista?
Jun 15, 2011I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies View RelatedFedora Installation :: Dual Boot 13 Onto Windows 7 Machine - Can't Install Onto Unpartitioned Space
Sep 20, 2010I am trying to dual boot Fedora 13 onto my Windows 7 machine. I have shrunk my Windows drive to create 100GB of unpartitioned space, but when trying to install Fedora onto this free space (it is recognized as "Free" space), the installer tells me that there is no space for the partition.
View 5 Replies View RelatedDebian Installation :: Install XP Dual Boot On 7.8 Box
Mar 6, 2015Is it possible to install Windows XP on a machine that already has Debian 7.8? I find lots of articles on installing Debian after but not before XP.
I would like to get a prompt at startup to select Windows XP or Debian 7.8 and then choose which one I want. The reason I want to do that is because I have Guitar Pro on XP and cant find anything as good and also I want to watch Netflix and cant seem to be able to find a way to do that on Debian 7.8 except windows emulator which defeats the point of Debian anyway. Also my Epson V500 will not work on Debian 7.1 and I have tried everything, been to Epson, installed drivers etc..
Fedora Installation :: Dual Boot Of 13 And Install Windows Xp On A Toshiba Satellite - Cannot Find C:inerrordialog.exe
Aug 4, 2010I figured I would begin delving more into the open source environment by dual booting fedora and windows xp pro. Windows xp WAS already installed on the laptop, so I went through the steps to get fedora installed. Everything appeared to be working fine. Fedora came up nicely, and then I tried to boot windows (using grub boot loader). The Windows splash screen appeared, making me think things were fine. But suddenly the screen went black, with the computer going through a restart. This happened every time I tried to boot windows. So I began scouring the web to see if someone had a similar problem. I tried numerous things, but none of them worked. Of them, this appears to have gotten me farther than anything:
Going into grub I changed: rootnoverify (hd0,0)
to: rootnoverify (hd0,1)
Everything else remained the same. When I made this change, the computer went through Ramdisk, and the Toshiba recovery tool. Then two dialog windows appear in secession.
The first stating: Windows cannot find c:inerrordialog.exe
The second stating: Windows cannot find c:inootpriority.exe
I stumbled across information about the recovery console tool. Well, since my laptop has an OEM installation, there is no recovery console tool. But eventually, I was able to find one that I could download. (In case anyone is interested, here is the link for the [URL]
I burned the image to a cd on another computer, and then attempted to boot to the console from the cd/dvd drive on the laptop. But the system crashed, with the customary blue screen. I was hoping to be able to execute the chdsk command to repair whatever damage there might be, but this problem occurs each time I run the image. Fortunately I backed stuff up before this. I'm just hoping that I won't have to go through the ugly process of restoring everything because it's a lot to restore.
Ubuntu Installation :: Repartition Hard Disc - Combine Two Unallocated Partitions To Install Windows 7 Dual Boot
Jul 28, 2010I would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies View RelatedDebian Installation :: Install To Intel Mac Dual Boot Using REFIt Not Loading
Jan 3, 2010I have installed Debian on my intel iMac, I installed grub first in my root partition and then in the Debian partition. When I boot my Mac, rEFIt brings me to the boot page and shows the Linux drive, but when I choose it, it tries to start up and then gives me the line "Not a bootable drive" and just hangs. How to get this to boot?
View 3 Replies View RelatedDebian Installation :: Windows Get Stuck On Logo Screen Or Safe Mode Loading Files
Nov 19, 2014Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
Fedora Installation :: Take The 686MB 32bit Iso Image And Put It On A 2GB Usb Drive And Boot / Install?
Feb 5, 2011i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
Ubuntu :: Dual Boot Win - Start Vista In Safe Mode?
Jul 10, 2010I didn't see a spot to do it in the grub menu or bios.I have that obnoxious AV Security Suit virus. This may be as good a reason as any to wipe the drives and install win7.
View 2 Replies View RelatedFedora Installation :: Install The Original Version Of Fedora 15 And Make It Dual Boot With Windows 7?
Aug 17, 2011So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
General :: Grub Boot Loader Installation In Dual Boot Machine After Windows 7 Installation?
Mar 23, 2010I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedUbuntu Installation :: Dual Boot Windows Vista / Lucid 10.04, Grub Doesnt See Windows?
May 7, 2010I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......