Debian :: Finding Video Driver For Mac Ibook?
Sep 19, 2010
I installed debian 5.06 on my Mac ibook g3, I had the same problem, the interface is only on a portion of the screen (about 70% x 70%) of the size of the screen.The screen is configured for 800x600, there is no another resolution, so I suppose I need another driver.here is the lspci output ; vga compatible controller : ATI technologies Inc Rage Mobility M3 AGP 2x (rev 02). secondly, If i couldn't install linux on this mac, can I retrive or reinstall ? the mac OS ?
View 1 Replies
ADVERTISEMENT
Jun 8, 2010
I set up Ubuntu on an old iBook G4, planning to use it as a front end to my main box. Installed 10.04 no problem, and from there, used Software Center to install MythTV Front end. Have done the same thing on a netbook, no problem.
However, on this PPC Mac, the front end works fine, navigation, menus, etc, until I try to play a recorded programme - the screen is blank, and I just get white noise from the speakers.
(BTW am trying Ubuntu as I don't have a Mac OS new enough to get any of the current Mac MythFrontEnd builds working)
View 2 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Jul 17, 2010
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
View 4 Replies
View Related
Oct 19, 2010
I'm trying to run/use the Intel GMA 4500 on my Debian Linux (Lenny), but I'm having some problems. I just can't find the drivers and the default installation does not install the correct driver.
View 3 Replies
View Related
Jul 24, 2014
I just purchased an Acer Aspire V5-123 notebook with AMD processor and graphic and installed Debian 7.6 (stable) on it. first of all, I had to install a newer (3.14.0.bpo.1-amd64) kernel image to get the ethernet card working. Then, I got problem with Xorg not starting.
Here is the error lines from /var/log/Xorg.0.log:
Code: Select all(EE) VESA(0): V_BIOS address 0x0 out of range
...
(EE) Screen(s) found, but none have a usable configuration.
and this is the output by issuing lspci:
Code: Select alllspci -nn | grep VGA:
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Device [1002:9834]
I installed the libgl1-mesa-dri, xserver-xorg-video-ati, and firmware-linux-nonfree packages, as suggested by AtiHowTo from Debian Wiki, but the problem still persists and the last one (firmware-linux-nonfree) actually caused the notebook to freeze on boot. so, I removed it.
View 7 Replies
View Related
Feb 16, 2015
Just used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
View 14 Replies
View Related
Feb 18, 2016
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
View 7 Replies
View Related
Jan 31, 2010
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
View 6 Replies
View Related
Sep 7, 2014
I use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies
View Related
Aug 28, 2010
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
View 9 Replies
View Related
Jul 17, 2011
since a whole week now i am trying to set up a Debian System on an old Ibook G4, with 1.2 GHz and 768 MB RAM. My Install Media is the Wheezy 8-CD-Set. I am not going to have anything besides Debian on the Notebook.
The Install process works fine until the Installation of the Core System. At the end of this process a window pops up and tells me that the CD with the title Wheezy-CD-1 or something like that is inserted and asks me to insert another CD or DVD now. Up to this point everything seems fine to me, but when i hit the "OK" Button the CD won´t come out of the Notebook, and besides that the Installer freezes. A progress bar, entitled with "executing cdset", is shown at a progress of 25% and does not move, also nothing happens when i try to cancel the process.
Whats the problem with my Installation? I already downloaded a second copy of the first Image and burned it again in case something was wrong with Installation Media, but the problem is still the same.
View 5 Replies
View Related
Jul 18, 2011
I´ve set up a Squeeze System on an old Ibook G4 and, besides wlan, everything works fine.i guess i need some firmware, i have tried several things and couldnt resolve the problem. I am unsure which firmware i actually need, or of something else has to be done.i´ll post the outputs of ifconfig, iwconfig and lspci and hope someone who could guess the problem or find the solution with it.
root@debian:/home/robert# ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:11:24:32:20:54
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[code]....
View 1 Replies
View Related
Jun 26, 2011
I have installed Debian Lenny with LXDE on a Dual USB 500Mhz iBook g3 the login screen appears displaying the screen using "800x600" pixels with the screen resolution at "1024x768" - so the login screen fills 2/3 of the LCD with black space to the right and the image repeating itself in the bottom 1/3 of the screen The "System Tools" > "Monitors Settings" only list one setting size of "800x600" and "Auto" After trying to search for answers I have tried editing the /etc/X11/xorg.conf file (after stopping gdm and rebooting afterwards)
# ... after these lines
Section "Screen"
Identifier "Default Screen"
[code]...
But nothing changes.
I have also tried [ dpkg-reconfigure xserver-xorg ] but there is no prompt for resolution
View 5 Replies
View Related
May 27, 2011
I have a 2003 iBook G3 White Dual USB laptop running Squeeze. I have a weird question. I found that get the WEP or WPA to work with the card, I basically delete the firmware "agere_sta_fw.bin". As the computer boots, it complains that it can't find the firmware, because it obviously isn't there anymore. However, the wireless card works just fine once it boots up. I can connect to my WEP wifi immediately, which is impossible if it uses the firmware. However, when the computer sleeps (which it likes to do all the time when it isn't plugged in) it hangs on wake trying to find the firmware. After awhile, it gives up and comes back up. The network controllers (LAN and Wireless) are completely missing and cannot be re-activated unless the computer is rebooted.
Now my question is this. What is driving my Orinoco Airport card and Network port when it can't find the correct firmware. Is there a command or program that will tell me what driver it is using to run it. Then, do you suppose that I could map the firmware file to that driver so the computer can wake with out problems?
[code]...
View 2 Replies
View Related
Apr 8, 2010
I've been searching for an hour or so and can't seem to find a concrete answer. My endgame is having Ubuntu successfully installed (either 9.10 or 10.04) with a fully working Ati 4870x2. I desperately need some help on finding the proper configuration of OS version and driver version. I installed 10.04 with the 10.3 driver package from ATI's site and it was a no go - I had nothing but problems.
I would like to have full 3d acceleration so I can play some games through Wine. This is a powerful card - I know ATI doesn't have a great reputation in the Linux world but I really hope there is a driver version I can install to get some good results.The rest of my specs are in my signature I need to install 64 bit Ubuntu to make use all of the system and video ram.
View 2 Replies
View Related
Apr 21, 2010
I was going to try out Squeeze on my ibook so I downloaded one of the weekly snapshots of the netinstall image and booted the installer. The installer was unable to recognize the ethernet card of my ibook which I found odd since I have used Lenny in the past without having any problems. Does anyone know if this is a bug in the installer or has firmware for my ethernet card been dropped from Squeeze? I searched around and couldn't find any bugs that were specific to PPC with this installer. It is not a deal breaker as I can just install Lenny and then dist upgrade to Squeeze,
View 4 Replies
View Related
Jul 20, 2010
I was trying to get a SMART board to work with my install of Lenny on my iBook G4. By work with, I just need it to display what's on the iBook's screen, I don't need any kind of interactivity. Since it is an iBook, it uses a PowerPC processor, instead of an Intel, and the SMART board driver only works on an x86 processor, I can't use the driver provided. Is there any way to get this to work? I imagine that I need to edit the X.org configuration file!
View 1 Replies
View Related
Mar 22, 2015
I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
View 1 Replies
View Related
Jun 19, 2011
The machine I'm using has a PowerPC architecture so I'm somewhat limited to what flavors of Linux I can use and I don't want to go back to Mac OS 8.9. The HD is only 3.3 GB so I can't get both Debian and GNOME on it.
View 1 Replies
View Related
Mar 7, 2010
I have an white iBook (G3 900mz model) and it doesn't autodetect the sound card. Running lspci | grep audio doesn't produce anything but running alsaconf does detect the PowerMac sound card which works if you follow all the prompts. Unfortunatly this doesn't make anything permanent and I was looking for advice as to how to set this up so that the sound configuration is actually there across boots.
One of the screens of alsaconf after selecting PowerMac and watching it say configuring snd-powermac it asks; Would you like to modify /etc/modprobe.d/sound? (and /etc/modprobe.conf)
Which I say yes to and then it gives me the happy message about having fun with your working sound card. I then log out and back in and the sound works great.
I've tried using alsactl store but that doesn't seem to work because at every boot there is a message that scrolls past saying "alsactl restore" failed with a state of 1573: No Sound Cards found.
View 1 Replies
View Related
Jan 28, 2011
I've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
View 4 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Jul 20, 2010
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
View 9 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Feb 13, 2011
I installed Debian recently, and everything seems to be working fine, except some video games are unusually slow compared to what they would normally be. Tremulous, for example, worked reasonably fine on this computer with Windows XP, but now (Debian) for some reason it's laggy even on the title screen.
Something wrong with my video drivers?
All of the information I know:
The computer is a Dell Dimension 3000
RAM: 256mb? Gnome System Monitor says 247.1mb, SWAP: about 730mb
Processor: Intel Celeron 2.40GHz
HD: 25gb out of a 40gb HD free, and an external 1tb HD with about 920gb free
Debian Release 6.0 (squeeze)
Kernel Linux 2.6.32-5-686
GNOME 2.30.2 (I've tried LXDE also, no noticeable change)
Only linux on the machine.
glxinfo told me this:
Code:
64 GLX Visuals
128 GLXFBConfigs:
lspci told me this:
Code:
View 9 Replies
View Related
Aug 6, 2011
I am running gnome 3 on ubuntu 11.04, a clean installation from the gNatty version, 32 bit. The machine is a Lenovo t420, with 6GB RAM and a integrated video card.
Everything is running smoothly but not for games. I tried urban terror, Tremulous, Nexuiz, all of the lags from the very beginning as if I was using a machine 5 years ago to run today's video games (ie, takes 10 seconds for a mouse move a show, audio lags, .etc). From my experience it should come from video card driver not installed, but the update manager shows all device works fine (indeed, the screen resolution is 1600X900).
View 9 Replies
View Related
Jan 15, 2011
is there any video editor for opensuse11.3?
View 9 Replies
View Related
Sep 29, 2010
I am interfacing ADE7758 to At91sam9261 spi interface. Linux 2.6.28 is running on my custom board. have driver for this 12-bit ADC (ADE7758) on linux ?
View 11 Replies
View Related
Feb 17, 2010
From time to time I try to play saved video from ..... but it is not working.<br> I receive the following lines from MPlayer.<br>
Quote:
Playing /tmp/FlashqikYbO.
libavformat file format detected.
[flv @ 0xb7f27c48]Unsupported video codec (7)
[flv @ 0xb7f27c48]Unsupported audio codec (a)
and
Quote:
Cannot find codec matching selected -vo and video format 0x7. Read DOCS/HTML/en/codecs.html! But I can't find DOCS/HTML/en/codecs.html this at my machine, damn I guess it is some rare flv format, no one of my video players are able to play following video.<br> [URL] it happens often, so I was wondering maybe exist some video diagnostic tool that will provide me all info about video file?
View 4 Replies
View Related
