Debian Installation :: Ethernet Not Found Squeeze Net Install PPC Ibook G4?
Apr 21, 2010
I was going to try out Squeeze on my ibook so I downloaded one of the weekly snapshots of the netinstall image and booted the installer. The installer was unable to recognize the ethernet card of my ibook which I found odd since I have used Lenny in the past without having any problems. Does anyone know if this is a bug in the installer or has firmware for my ethernet card been dropped from Squeeze? I searched around and couldn't find any bugs that were specific to PPC with this installer. It is not a deal breaker as I can just install Lenny and then dist upgrade to Squeeze,
View 4 Replies
ADVERTISEMENT
May 15, 2010
I am attempting to install Debian 5.0 amd64 to my Toshiba laptop, which has an Atheros AR8131 Gigabit network card.Unfortunately the installer is not finding the card. I have downloaded the Linux drivers for my card to a USB drive. When I tell the installer to load the drivers from removable media it is telling me that it is not able to read the files. I am guessing that I either need to place the files into a particular named directory or I have the wrong file format (currently a .tar)
View 11 Replies
View Related
Jan 28, 2011
I've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
View 4 Replies
View Related
Aug 28, 2010
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
View 9 Replies
View Related
Jul 17, 2011
since a whole week now i am trying to set up a Debian System on an old Ibook G4, with 1.2 GHz and 768 MB RAM. My Install Media is the Wheezy 8-CD-Set. I am not going to have anything besides Debian on the Notebook.
The Install process works fine until the Installation of the Core System. At the end of this process a window pops up and tells me that the CD with the title Wheezy-CD-1 or something like that is inserted and asks me to insert another CD or DVD now. Up to this point everything seems fine to me, but when i hit the "OK" Button the CD wont come out of the Notebook, and besides that the Installer freezes. A progress bar, entitled with "executing cdset", is shown at a progress of 25% and does not move, also nothing happens when i try to cancel the process.
Whats the problem with my Installation? I already downloaded a second copy of the first Image and burned it again in case something was wrong with Installation Media, but the problem is still the same.
View 5 Replies
View Related
Sep 26, 2010
I get the following error message when attempting to boot: No DEFAULT or UI configuration directive found.
View 1 Replies
View Related
Aug 17, 2010
i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?
View 12 Replies
View Related
Jan 22, 2011
I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.
View 5 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Jul 17, 2010
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
View 4 Replies
View Related
Jun 6, 2011
I'm attempting to dual boot my computer with Slackware, Debian and Windows. I've installed Lilo to the mbr from Slackware, i've edited my lilo.conf file so I can boot Debian. When I boot debian though, it says it's boot kernel 2.6.37 which is the slackware kernael it fails to load the modules. I think my problem is in the lilo.conf file in the debian line, "image = /boot/vmlinuz", if I've understood correctly I should put the debian kernals name after that line, I've done as I saw on the internet, but it comes up with, "kernel can not be found" or something similar to that. I think it's looking for it in a slackware directory. Is there a place on the debian dvds (i've all eight) I can get the kernel?
View 6 Replies
View Related
May 21, 2010
I've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
[ 0.380308] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.380310] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380401] NET: Registered protocol family 2
[code]...
View 9 Replies
View Related
Sep 15, 2010
A Linux user for about 10 years, distro hopping for half of them. Finally found peace with PCLinuxOS (great distro), and MintLinux. When Mint went over to Debian, I thought why not try the original, so here I am.Booted the dvd, checked everything was working well (excellently, actually), and started the install over an existing PCLinuxOS system (dual booting with XP). First time installed while inside the gnome system, from the desktop icon, second and subsequent times from the welcome screen after boot (only text modes were available).In all cases, everything goes fine until I partition and install the packages. Partitioning is no secret to me, unless there is a "Debian way" of doing it: went through "guided partitioning," and chose the existing PCLinuxOS partitions, 37 Gb for /, ext3 (tried ext4 later with same results), and 2 Gb for swap, both on sda (sda1 and sda5). This is a full hard-disk, just for Linux. The other disk is for XP (sdb).
Tried formatting existing partitions, erasing contents of disk, and keeping as is. In all cases, when partitioning is done, the system installation fires up and I see all packages being transferred (up to 100%). Then I have a pop-up window telling me to continue to package manager, which I do, but then I get a message saying that I am trying to install on an "unclean target," over an existing installation (even after fully erasing the disks). It asks whether to continue or not and, whatever I do, I'm taken back to system install again, and see the progress go up to 100% and the same question again.
If I go back to the install menu and ignore the message, jumping to installing grub, I get an error message saying that grub install has failed, and that's it. I can't progress further because of these error messages.If I ignore all and boot without the live dvd, I get a prompt and nothing else, and I can't even use XP. Basically, I'm stuck unless I install another distro again to have a working system.First searched this forum and Google to get answers to this problem, but couldn't find anything applicable to my case.
View 14 Replies
View Related
Jan 2, 2011
I burned an .iso of a recent Squeeze Live DVD - KDE edition. I was checking it out but I'm not sure it's reliable for installing.I was wondering if anyone has tried it or could comment.I noticed a few things that was a bit disconcerting.One, there were a lot of 'question marks' in the kickback menu.Is that normal?Two, when you (I) try to reboot the system or otherwise 'leave' the live state, it doesn't reboot properly.Some distributions will 'shut down' and then give you a prompt for taking out your CD or DVD and then there is some script or program that reboots the machine for you. But, the Debian Live DVD I used didn't do that. It's a recent one, dated Dec. 20.What happened is that it just looped back and re-started.There was no prompt or even much of a delay. I couldn't open the optical drive tray at any time.I had to cold restart the machine so I could take the DVD out.
I was disappointed since I thought it is a good project and a worthwhile venture to try and have a live media option for installing the later editions of Debian such as Squeeze or if they can keep up progress, whatever edition it's at.I am a bit hesitant to try this version for a true install so I am wondering what others say.I thought I should go for the 'desktop Squeeze/Testing AMD-64-KDE' CD ISO instead?There's no live media but I have tried the live DVD so it looked okay other than the two issues mentioned.
View 2 Replies
View Related
Feb 13, 2011
I want to give Debian a try in a VM (4.0.2) on Ubuntu 10.10,I use the netinst 64.Everything runs fine and it downloads it all but, when gets time to install it, I get an installation error...
View 3 Replies
View Related
Jun 11, 2011
I am trying to load Debian Squeeze from a net install CD on an old Wallstreet laptop. I am using BootX in OS 9.2. The problem I have is after the install gets to the bootloader section I tell it to continue without a bootloader, then open a shell so I can mount the Mac hard drive and copy the kernel and image file to the correct places. However, the Mac drive does not show up using df. I tried mounting to /dev/hda8 ( I know this is where the Mac HD is supposed to be) but get device not found error. I recall in previous version (etch) installing from full CD I had the option to install hfsutil, but I did not get that option with this netinstall CD. I changed the debconf priority to low hoping I would get more options of software to install but to no avail. Any ideas on how to get the kernel and image file to the Mac hard drive?
View 3 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Mar 18, 2011
I'm newbie so I didn't know where to post my question. Well, here's my question: I'm trying to install bochs on Debian Squeeze but no success. I'd downloaded last version of bochs (2.4.6), then decompressed it and tried this: ./configure --enable-debugger --enable-disasm --prefix=/opt/bochs-2.4.2 --enable-mmx --enable-sse=4 --enable-fpu --enable-vbe --enable-sse-extension --enable-cpu-level=6
[Code]...
View 1 Replies
View Related
Apr 3, 2011
I was using Lenny until now, and I liked it very much. Now I've seen that squeeze is finally released, so I decided to make a fresh install of squeeze, as I made some mistakes while installing lenny, like downloading kde meta-package (full of useless programs), small root partition etc...Now, I want to install Squeeze with KDE, but not the meta-package, just the required programs in order to run the GUI, and then I want to select which programs to install by myself... How can I do that?
View 2 Replies
View Related
Jun 8, 2011
my dvd drive broke and i read that usb storage is more dependable than optical installation media so i want to know how to install debian squeeze through a usb thumb drivewill unetbootin work, if notthen what will
View 11 Replies
View Related
Aug 11, 2010
I am trying to install squeeze on a new netbook Packard Bell Dot S2 installer fails at not able to make an ethernet connection through this >> Atheros AR8131/AR8132 Gigabit/Fast Ethernet Controller. So i am unable to make progress with the install? I am using the debian-testing-i386-businesscard image.
I also have a wireless connection but thats a wpa setup that doesnt seem to be supported on the installer just wep or am I wrong?
View 4 Replies
View Related
Oct 28, 2010
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
View 14 Replies
View Related
Jun 17, 2011
I am trying to install webmin on my Debian virtual machine and it is not working.
Here is what i am following [url]
I ad the 2 lines to /etc/apt/sources.list I ad the key ok But when i do apt-get install webmin it goes through everything ok as far as i can see, except when it gets to " **initializing cache. This may take a while **Setting up webmin (1.550) ... " It is like it just stops doing anything, it just hangs there.
If i reboot and try "dpkg --configure -a" it starts at the same place "Setting up webmin" but nothing is happening.
View 2 Replies
View Related
Feb 19, 2010
I am trying to figure out where the harddisk power management can be found in Squeeze. Before it was in the scripts under /etc/acpi, but in Squeeze it's not. I'd like to be able to change the hdparm -B value from 128 to 200 when using battery.
View 3 Replies
View Related
Feb 1, 2010
i try to install a recent squeeze of this January on a new laptop, HP dv6-2044el. The installation get blocked on the "Detect network hardware" step. The network interface is a "Realtek RTL8168d/8111D Family PCI-E GBE NIC controller".
View 1 Replies
View Related
Sep 2, 2010
Every where I look online, people are posting ridiculous non-working ways to upgrade their system from one release to another--they do not work for me and I need a definite expert reply. I am working with a fresh install of Debian Lenny/Stable and wish to upgrade to the frozen Squeeze distribution. Supplementing the word "squeeze" in place of "lenny" in my sources.list file does not work and believe this to be an inappropriate way of upgrading. I have tried upgrading apt, dpkg, and aptitude before beginning the upgrade process, cleaning dpkg cache, rebooting, etc.
After updating the above packages I tried all methods of upgrading: safe-upgrade, full-upgrade, and dist-upgrade. All produce dependency problems and try to remove the gnome-desktop package or upgrade everything else except gnome-desktop. (Other packages are also affected, gnome-desktop is the most important in this instance). As I understand it, when upgrading you can comment out the volatile repositories as well as the security updates, is this correct?--either way I have tried countless combination's off commenting/uncommenting to try to get the needed results. I do not want use sid repos or reinstall.
View 14 Replies
View Related
Jan 24, 2010
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies
View Related
Jun 3, 2015
I am attempting to install some applications on Debian 8 Jessie, with Gnome Desktop, and every package I try to install keeps coming up with the error E: Package Not found, I have been searching then trying for a solution on the Web, which includes apt-get update, and there are none for Debian 8 at all.
View 14 Replies
View Related
Jun 7, 2011
I've decided to move to Debian because I have noticed Ubuntu releases getting progressively more unstable.I am following the official Debian installation guide. Just did this with the Debian 6.0 Net install .iso: 4.3.1. Preparing a USB stick using a hybrid CD or DVD image. Debian CD and DVD images can now be written directly a USB stick, which is a very easy way to make a bootable USB stick. Simply choose a CD or DVD image that will fit on your USB stick. See Section 4.1,Official Debian GNU/Linux CD-ROM Sets to get a CD or DVD image.
Alternatively, for very small USB sticks, only a few megabytes in size, you can download the mini.iso image from the netboot directory (at the location mentioned in Section 4.2.1,Where to Find Installation Image).The CD or DVD image you choose should be written directly to the USB stick, overwriting its current contents.
View 5 Replies
View Related
