I downloaded cd1 of amd64 debian os. Its not booting from the CD. There are no problems with the drive or the laptop. I have successfully installed ubuntu from its cd image booting from the CD-ROM drive.
View 1 RepliesI recently did a side by side install of lubuntu on my windows 7 laptop. My HDD is actually 2 x 250GB HDDs. I have Win7 on the first, and chose to put Lubuntu on a part of the second. However, when I boot, I can only see the options for that second drive. when I went into the boot order It only shows the Harddrive as an option, not which one. Is there any way I can boot from my first drive again? I need to be able to get at my Windows 7, it is my main OS as I need Excel 07 for a college course. (due to auto-grading none others will work, not even office for mac (which is missing pivot-tables anyways).
So to summarize, I seem to have lost the ability to boot from the first hard drive, and cant find the separate hard disks in the boot order. Preferrablly I would like both OSes (Win7 and Lubuntu) to appear on the same boot choice list, but at least I would like to be able to access Windows7 and only use Lubuntu when I need it. (mainly for my Compouter Science coursework)
I had Ubuntu installed in Windows XP (with Wubi). One day my motherboard, let's just say stopped working. So, I had to replace my motherboard..., well I bought a new PC, but with the Hard Drive of the old one. When I first started it i got the same boot screen letting me choose between Ubuntu and Windows XP. Well, you can pretty much figure out that none of them worked. So, I installed Windows 7 (as the new configuration is pretty powerful). So, from the boot menu Windows XP was replaced by Windows 7 but still Ubuntu stays there and I can't figure out how to delete it.
View 2 Replies View RelatedI had (and still do) a working dual-boot XP/Karmic (GRUB version 1.97 beta4). I shrank the Ubuntu partition and set up partitions and installed Debian 5.04. When I got to the point of installing GRUB, I told Debian to install grub to MBR. On rebooting, Ubuntu was not an option on the NEW (looked different) grub menu.Maybe it was GRUB2? Could boot to either XP or Debian though.
Thought easiest thing was to reinstall Ubuntu since it seems to "see" other OS's more reliably. So I did, and installed GRUB again during its install to MBR. Then, all three were in the GRUB menu (version 1.97 beta4 again), but when tried booting to Debian, got an error (forget the wording), but think it was because the partitions got renumbered when installing Ubuntu.
SO, reinstalled Debian, reformatting the partitions but not deleting them first so the numbering stayed the same. When got to the part for installing GRUB, I told it to skip (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..."), hoping now the current GRUB would work.
Now, all three were on the GRUB menu, but when I tried to boot Debian, I got "no such device" and a list of numbers/letters after it. And "press any key to continue", which takes you back to the GRUB menu (version 1.97 beta4, by the way).
O.K., did sudo update-grub in ubuntu and rebooted. Now, Debian 5.04 shows as last entry in GRUB, and choosing it starts a boot, which hangs at "Begin: Waiting for root file system....".
Waiting long enough at the "Waiting for root file system..." hang results in a series of notifications:
WARNING bootdevice may be renamed. Try root=dev/hda3
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the sytem wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda3 does not exist. Dropping to a shell!
In Gparted, the partition with Debian root is hdc3, although on the GRUB menu it's listed as /dev/sda3. However, in Gparted the Windows partition is hdc1 and on GRUB it's /dev/sda1, and it boots fine.....
Is my Debian install just borked? Did telling it to skip installing a bootloader (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..." ruin it?
If skipping the bootloader install did ruin it, how do you install Debian without borking your current GRUB? That's what happened the first time.
Alright so I am trying to setup a dualboot with desbian on windows 8.1. I have it installed on a usb using Unet, got secure startup disabled as well as fast startup, and I have USB first on the boot menu, but when I restart it just loads as normal and doesn't boot up the usb.
View 10 Replies View Relatedhaving major trouble installing Debian.erased the data on one of the partitons that used to hold Vector Linux and tried to install Debian on but it failed for some reason.Since I'm dead tired (well, was) I thought I would call it a night and just wait until tomorrow to finish the installation.So, I rebooted my computer and all it would do is this:
99 99 99 99 99 99 99 99 99
99 99 99 99 99 99 99 99 99
It would just do two or three rows of 99's and then it would hang. Does anyone know what is happening? Right now I have Windows on this computer and I can't even boot into that. The data for Windows is safe but I just can't boot into Windows for some reason.n erasing sda6, did I accidentally erase LILO too (Vector was the first option on LILO)?If someone has posted this problem in the past
I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.
After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.
I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.
Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.
Got Wintendo7 on one samsung S-ATA disk. ( need it for starcraft2 and Homeworld2... sorry.. )
Now..: Booting Debian Unstable from USB or CD-ROM, then start installer. Tell it to install on second samsung S-ATA disk.
Before I go on, I just feel i will get into some serious trouble with GRUB?
Or will the installer understand, and see the windows7 installation and add it to Grub?
If not, what should I do inside /boot/grub/menu.lst when Debian is up and running?
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
Debian not booting from USB external SSD drive. Linux 3.2.0-4-686-pae been installed on new SSD, attached to Windows 7 laptop. When I select "USB storage" in Windows boot order menu and try to boot, Linux not booting, every time loading Windows. Is it ever possible to boot linux with such setup?
[URL] .....
I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code:
Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso
and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
Code:
Select all~$ md5sum debian-8.1.0-i386-netinst.iso
095a83b715e1b74b6d30b2259275f4af debian-8.1.0-i386-netinst.iso
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code:
Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum
645120+0 records in
645120+0 records out
330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s
095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
I'm trying to rebuild an old laptop, EeePc 1001PX and I've issues to boot on the usb on it.
I've followed [URL] .... and the only way I manage to make a usb key that will boot is by hd-media/boot.img.gz:
Code: Select all# zcat boot.img.gz > /dev/sdb
# mount /dev/sdb /media/usb
# cp /tmp/debian-8.4.0-i386-CD-1.iso /media/usb
# sync
# umount /media/usb
I managed to install Debian using this technique to build the usb key.
However I'm having an issue on the laptop with the wifi card (Atheros AR9285) and after a night trying to make it work I'd like to check if I'd would have the same issue Ubuntu.
So I've been desperately trying to make a bootable usb key with Ubuntu on it.... It boots on my laptop but not on this EeePc...
I've tried:
Code: Select allcat /tmp/myimage.iso > /dev/sdb
Code: Select alldd if=/tmp/myimage.iso of=/dev/sdb && sync
I've installed multibootusb [URL] ... and liveUsb install [URL] .... which doesn't work on my EeePc...
Wh only this technique of using is hd-media/boot.img.gz is working on that laptop?
I'd like to try to install Ubuntu via grub using a partition [URL] .... but I need to create 2 partitions and so to boot on a external system.
I've downloaded gparted-live-0.25.0-3-i686.iso but like with Ubuntu I don't manage to create a bootable USB key for this crappy EeePc.
I recently did a single boot install of Lenny-xfce on a Compaq Armada laptop. There were no errors and grub indeed found that Lenny was the only OS on the hard drive and installed itself on the MBR. My problem is that I'm getting an error 18 when booting the freshly installed system from hard disk. I booted into rescue mode and started a shell to take a look around. There are files on the drive and /etc/grub exists. device.map shows dev(0,0) as being mapped to /dev/hda. A search on the forum for "grub error 18" came up with nothing.
View 2 Replies View RelatedI found out that my installation was incomplete. So I reinstalled Debian using the businesscard image on a DVD. It worked fine, but I have a hardware constraint on my computer. I have two SATA hard drives and one SATA CD/DVD drive, and only two SATA connections on the motherboard. So, to install Debian I had to remove one hard drive and put the CD/DVD drive. When I saw that Debian was working, I removed the CD/DVD drive, and that's when Debian stopped booting. It said it couldn't find tty and opened BusyBox, giving me a command-line interface, and the line started with (initramfs) before the commands (with the parenthesis).
View 1 Replies View Relatedi have a pc having OS Windows XP and Windows 7 installed (hd0,0 and hd0,1). Yesterday i installed Debian 6(hd0,5). But it doesn't show boot menu on startup. It automatically load GRUB and start loading Debian. While i m on GNOME or KDE i can see all the files of windows XP n 7. Is any way to rescue and boot with Windows???
And yah one more thing ... i also dont have menu.lst file in /boot/grub/.
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
When trying to install Debian 6.02 from a boot cd, the boot halts with the error message Kernel panic - not syncing: No init found. Try passing init= option to kernel. In looking for a solution I see a great deal about this problem occurring after messy upgrades and the like, but when when booting from a cd downloaded right from the debian website.
View 3 Replies View RelatedERROR: No configuration file found
No Default or UI configuration directive found!
boot:_
This appears when I try to boot Debian 7.6.0 from my USB drive
I'm trying to manually boot (from the GRUB console) into a system set up as follows: crypt partition -> LVM -> root LV, and I'm having some trouble figuring out how to do this from the GRUB console.
I have successfully manually booted a system which is set up as just LVM -> VG -> root LV. All I have to do is load the LVM module. In GRUB, that partition shows up as (hd0,gpt5). Once I load the GRUB LVM module, I can see the logical volume within the LVM as well. (My volume group name is "caesar", and the single logical volume is named "root".)
Code: Select allgrub> ls
... (hd0,gpt5) ...
grub> insmod lvm
grub> ls
... (lvm/caesar-root) ...
It's fairly simple to manually boot:
Code: Select allgrub> set root=(lvm/caesar-root)
grub> linux /vmlinuz root=/dev/mapper/caesar-root
grub> initrd /initrd.img
grub> boot
Where I am having difficulty is in trying to insert crypt before LVM. I can set up such a scheme, and put a minimal installation on it, without issues. It's booting into it upon reboot that I can't figure out. Once I load the GRUB crypto, cryptodisk and luks modules, I can mount the crypto partition:
Code: Select allgrub> ls
... (hd0,gpt5) ...
grub> insmod crypto
grub> insmod cryptodisk
grub> insmod luks
grub> cryptomount (hd0,gpt5)
Attempting to decrypt master key...
Enter passphrase for hd0,gpt5 (<long hex string here>): <type my password>
Slot 0 opened
grub> ls
... (crypto0) ...
At this point, GRUB sees the crypto partition as (crypto0). But the GRUB LVM module doesn't see "inside" of the crypto partition, so I don't see the root logical volume within the LVM listed; all I see is (crypto0).
Code: Select allgrub> insmod lvm
grub> ls
... (crypt0) ...
Setting it as root doesn't work:
Code: Select allgrub> set root=(crypto0)
grub> ls /
error: disk `crypto0' not found.
So, How do I get GRUB to "see" LVM inside the crypto partition?
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
Although I'm a linux user, I don't know much about the whole booting process myself. I normally have a friend that I can consult when things don't go the way I expected. But here's the thing: he updated my computer and went away. And of course I can't reach him and I really need it to work. And moreover, I want to be able to sole things myself.
The booting process stops halfway. The last thing it says is: can't access tty: job control turned off (initramfs) ...
I am getting this error when I try to install Debian in my Toshiba L650D Laptop.
[0.417999] [<ffffffff 814f3140>] ? early_idt_handler+0x0/0x71
[0.418045] [<ffffffff 814f351f>] ? kernel_init+0x0/0x1a2
[0.418091] [<ffffffff 81411ba0>] ? child_rip+0x0/0x20
I'm trying to boot from cd so that I can reinstall 9.10 after the upgrade to 10.04 has caused some issues with programs I've been running.
However, I can't seem to get the comp to boot from cd. i know the 9.10 cd works because I had originally installed Ubuntu using it and can't figure out why now with ubuntu installed I can't get the cd to boot.
I would need your help to solve some problems that came after upgrading to Squeeze:first: xserver is not working. When I manually launch startx I got an error message: vesa kernel modesetting driver in use refusing to load no screens found
View 8 Replies View RelatedI installed debian 8.1.0 (netinist-i386) in my laptop at work using ethernet (installed mate desktop). At home I do not have such thing, so I should use my phone connection. I can not use wifi due to b43-firmware. I use usb tethering as my only solution. Now I connected to my phone but do jot have internet access in laptop. ping http://www.google.com or 8.8.8.8 or any other address says destination host unreachable,
ifconfig shows usb0 is ok
/etc/resolv.conf:
#generated by networkmanager
nameserver 192.168.42.129
How to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.
So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.
lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
[Code] ....
I have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies View RelatedI need to get Debian ETCH working with Flash, due to professional issues I cannot update to a newer Debian distribution (Squeeze for instance) now.[URL]Which tells me to use swfdec0.4 or swfdec0.5. but the archive repository for Etch only provides this swfdec0.3 are there any repository able to provide this out of date lib
View 4 Replies View RelatedI installed Debian awhile ago, but then replaced the mobo. Now my system doesn't detect the onboard LAN card, installing the windows driver fixed that problem on windows but I can't seem to find the appropriate driver for Linux.
The card is an Atheros 8151.
The problem is that my install of linux (64bit) does not recognize any adapter on the system. I went and downloaded a driver, after a make, make install, and reboot it still wasn't fixed.
I can find on this recommends downloading from some partner.atheros.com which seems defunct.