Debian Installation :: Booting Debian With Ubuntu/XP Triple / Warning Bootdevice May Be Renamed?
Mar 6, 2010
I had (and still do) a working dual-boot XP/Karmic (GRUB version 1.97 beta4). I shrank the Ubuntu partition and set up partitions and installed Debian 5.04. When I got to the point of installing GRUB, I told Debian to install grub to MBR. On rebooting, Ubuntu was not an option on the NEW (looked different) grub menu.Maybe it was GRUB2? Could boot to either XP or Debian though.
Thought easiest thing was to reinstall Ubuntu since it seems to "see" other OS's more reliably. So I did, and installed GRUB again during its install to MBR. Then, all three were in the GRUB menu (version 1.97 beta4 again), but when tried booting to Debian, got an error (forget the wording), but think it was because the partitions got renumbered when installing Ubuntu.
SO, reinstalled Debian, reformatting the partitions but not deleting them first so the numbering stayed the same. When got to the part for installing GRUB, I told it to skip (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..."), hoping now the current GRUB would work.
Now, all three were on the GRUB menu, but when I tried to boot Debian, I got "no such device" and a list of numbers/letters after it. And "press any key to continue", which takes you back to the GRUB menu (version 1.97 beta4, by the way).
O.K., did sudo update-grub in ubuntu and rebooted. Now, Debian 5.04 shows as last entry in GRUB, and choosing it starts a boot, which hangs at "Begin: Waiting for root file system....".
Waiting long enough at the "Waiting for root file system..." hang results in a series of notifications:
WARNING bootdevice may be renamed. Try root=dev/hda3
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the sytem wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda3 does not exist. Dropping to a shell!
In Gparted, the partition with Debian root is hdc3, although on the GRUB menu it's listed as /dev/sda3. However, in Gparted the Windows partition is hdc1 and on GRUB it's /dev/sda1, and it boots fine.....
Is my Debian install just borked? Did telling it to skip installing a bootloader (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..." ruin it?
If skipping the bootloader install did ruin it, how do you install Debian without borking your current GRUB? That's what happened the first time.
I'm trying to get a triple-boot setup working with rEFIt and OSX 10.6.5/Win7/Ubuntu 10.10. I'm finally to a point where rEFIt shows a OS X, Windows, and Linux option but the Linux item boots up windows. I just finished booting the live CD and installing grub on the ubuntu partition, but rEFIt is *still* booting windows with the Linux menu entry (and no new entries have appeared since the GRUB reinstall).
Here's what the rEFIt partition inspector is currently showing - can anyone spot any problems? Note: Currently I have 5 partitions (OS X @ 60GB, Win @ 120 GB, Ubuntu (swap) @ 2 GB, Ubuntu @ 58 GB, and a general storage partition (formatted in OS X's HFS).
Code: Report for internal hard disk
Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 117597143 Mac OS X HFS+
I used debian several years ago, and I'm interested in trying it out again.Right now, I have a laptop running Windows Vista and Ubuntu 9.10 in a dual boot configuration. Here is the output ofsudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes
I recently bought a netbook on which Windows 7 Start Edition was installed. I partitioned the disk to install 2 other linux distributions : Backtrack 4 and Debian Lenny. Here is my partition scheme :
Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc6a9bf3e [Code]...
Partition table entries are not in disk order During both of the installs, I chose to install Grub. Unfortunately, when I start my netbook, it launches Windows 7 automatically and I do not see grub...
Im trying to install Backtrack 4, XBMC live, and ultimate boot cd onto a 4gb usb flash drive and im wondering if my partition layout is acceptable for doing what i want to do, and im wondering how to install them to usb correctly (unetbootin doesnt work)
partition layout 100mb for boot 2.5gb for backtrack 4 700mb for UBCD 700mb for XBMC live
how do i install grub, or another boot loader that will read the adjacent partitions and boot them no matter what pc im on?
I have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB Windows 7 - 167 GB Ubuntu - Maverick - 73 GB Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
Hey there. Currently my Toshiba laptop is dual-booted with windows 7 and Ubuntu 10.10 and I think I may try and triple-boot it with Snow Leopard. I'm not too familiar at all with hackintoshes so, how should I go about configuring a partition for the OS?
Also: is there any known problems running windows and a mackintosh OS?
If someone can give me some insight here I can also provide my computer's specs.
I'm a former Ubuntu user who jumped ship to Linux Mint. I currently am dual booting Windows 7 and Linux Mint 11 using Grub 2. Is there a way to install Fedora last? Much of the reading I have done suggests Fedora needs to be installed before Mint/Ubuntu. By the way, I have searched the forums and it has been suggested to wipe out Ubuntu, install Fedora and then re-install Ubuntu. I would much rather shrink the Windows partition and install Fedora before Mint and update Grub.
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
I just downloaded the Debian (Squeeze) businesscard 'netinst' ISO and every time I attempted to run an install, I keep getting the following error:http://yfrog.com/ngdeberrorp
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory Processing triggers for gconf2 ...
I'm doing a fully automated install of Etch, installing the standard system task. I'm using PXE boot with a preseed file.
I do this a lot, and I've not had problems before. This morning, it's stuck at 5% on "Select and install software" saying "Please wait...". The log on console #4 says:
WARNING: untrusted versions of the following packages will be installed!
[snip]
Do you want to ignore this warning and proceed anyway?
I installed a system yesterday without any problems, so I wonder if there's a recent problem with the mirrors I'm using. My /target/etc/apt/sources.list contains:
deb [url] deb [url]
So it looks like either the UK mirror or security.debian.org.
Alright so I am trying to setup a dualboot with desbian on windows 8.1. I have it installed on a usb using Unet, got secure startup disabled as well as fast startup, and I have USB first on the boot menu, but when I restart it just loads as normal and doesn't boot up the usb.
having major trouble installing Debian.erased the data on one of the partitons that used to hold Vector Linux and tried to install Debian on but it failed for some reason.Since I'm dead tired (well, was) I thought I would call it a night and just wait until tomorrow to finish the installation.So, I rebooted my computer and all it would do is this:
It would just do two or three rows of 99's and then it would hang. Does anyone know what is happening? Right now I have Windows on this computer and I can't even boot into that. The data for Windows is safe but I just can't boot into Windows for some reason.n erasing sda6, did I accidentally erase LILO too (Vector was the first option on LILO)?If someone has posted this problem in the past
I downloaded cd1 of amd64 debian os. Its not booting from the CD. There are no problems with the drive or the laptop. I have successfully installed ubuntu from its cd image booting from the CD-ROM drive.
I have a working system with triple boot (Macos, Debian and Windows Xp).I have total 4 partitions, EFI, Macos, Linux Ext3 and Windows Ntfs. At this point I want to split my Windows partition and turn into the new user "Home" partition. I vaguely remember that there might have been some limitations with number of partitions regarding multiple boot schemes. Does anyone have an idea if there would be any problem if I go ahead and split my Windows partition and end up with 5 total partitions on this laptop?
I need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.
After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.
I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.
Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.
Got Wintendo7 on one samsung S-ATA disk. ( need it for starcraft2 and Homeworld2... sorry.. )
Now..: Booting Debian Unstable from USB or CD-ROM, then start installer. Tell it to install on second samsung S-ATA disk. Before I go on, I just feel i will get into some serious trouble with GRUB?
Or will the installer understand, and see the windows7 installation and add it to Grub?
If not, what should I do inside /boot/grub/menu.lst when Debian is up and running?
I have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192 LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm Identifier: 0x42 Timestamp: 143521 Subpixel: horizontal rgb Gamma: 1.0:1.0:1.0 Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192 LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm Identifier: 0x42 Timestamp: 5817108 Subpixel: horizontal rgb Gamma: 1.0:1.0:1.0 Brightness: 1.0
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
Debian not booting from USB external SSD drive. Linux 3.2.0-4-686-pae been installed on new SSD, attached to Windows 7 laptop. When I select "USB storage" in Windows boot order menu and try to boot, Linux not booting, every time loading Windows. Is it ever possible to boot linux with such setup?
I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code: Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code: Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum 645120+0 records in 645120+0 records out 330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s 095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
I managed to install Debian using this technique to build the usb key.
However I'm having an issue on the laptop with the wifi card (Atheros AR9285) and after a night trying to make it work I'd like to check if I'd would have the same issue Ubuntu.
So I've been desperately trying to make a bootable usb key with Ubuntu on it.... It boots on my laptop but not on this EeePc...
I recently did a single boot install of Lenny-xfce on a Compaq Armada laptop. There were no errors and grub indeed found that Lenny was the only OS on the hard drive and installed itself on the MBR. My problem is that I'm getting an error 18 when booting the freshly installed system from hard disk. I booted into rescue mode and started a shell to take a look around. There are files on the drive and /etc/grub exists. device.map shows dev(0,0) as being mapped to /dev/hda. A search on the forum for "grub error 18" came up with nothing.
I found out that my installation was incomplete. So I reinstalled Debian using the businesscard image on a DVD. It worked fine, but I have a hardware constraint on my computer. I have two SATA hard drives and one SATA CD/DVD drive, and only two SATA connections on the motherboard. So, to install Debian I had to remove one hard drive and put the CD/DVD drive. When I saw that Debian was working, I removed the CD/DVD drive, and that's when Debian stopped booting. It said it couldn't find tty and opened BusyBox, giving me a command-line interface, and the line started with (initramfs) before the commands (with the parenthesis).
