On a Zenbook UX305, I did a fresh install of Debian. After booting, the screen turns black and I can't switch between terminals by typing Ctrl-Alt-F1..F7. After a boot with the keyword debug, the file /var/log/debug has the following contents:
URL] ....
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies View RelatedI thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies View RelatedI am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.
I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.
I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same
Not actually solved, but in the end just reinstalling got rid of the problem.
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I've just installed debian on a rather old laptop (Toshiba satellite 1800). The installation process was ok, I selected desktop supprot when it asked me which additional software it should set up.
But then, when I tried to boot for the first time, i saw some messages for the first time, but then I coud see only a black screen (yet the backlight is not turned off). Immediately before the screen turns black, the last printed line is something like "starting gnome...". When I select single-user mode in GRUB, the system (with no window manager) starts well.
I am experiencing a weird problem with my dell latitude laptop. I installed debian amd64 once with gnome and after grub it echoes the following message: Unknown controller version (2). You may experience problems. and after the /dev procedure my screen (16:9) goes black.
After that I tried to reinstalled debian without gnome and I booted to shell. From there I installed manually (apt-get) gnome and started gdm3 and I my screen was ok, but after I did a reboot the same problem happened. Also, when I boot with an external VGA monitor, the vga looks ok but the laptop screen is still black.
output of lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
EDIT: I just realized another strange thing. If I boot without the vga plugged, I get the usual black screen and If I wait and understand that I am in the login screen and at this time I plug the vga, then miraculously my laptop screen works fine!!! But later on if I close the laptop lid and open it again, then again ... black screen but if I plug the vga it's ok again!
I first installed Debian 64bit on DM510MO. The Debian 64bit single user (CLI) is working OK. Win7-64 is working OK. When I boot Debian 64bit in X mode (graphical interface) after the message "Starting webserver appache2." I have a black screen.The video IC is Intel GMA3150.00:02.0 VGA compatible controller: Intel Corporation Device a001 (rev 02)
View 3 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedAfter doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/
View 2 Replies View RelatedLast weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies View RelatedI have an Acer Aspire One that runs Windows XP. I downloaded both the full Ubuntu (latest version but can't remember the number) and the Ubuntu for netbooks- each on a separate flash drive. I thought I had the netbook version in my Acer when I booted it up, but I saw it was booting the full Ubuntu version. Instead of allowing it to finish installing to run from the flash drive, I stupidly shut it down and removed the flash drive. Ever since then, when I try to boot my Acer, all I get is the black screen of death. I've tried the flashit.exe to flash the BIOS, but no luck. So, I'm guessing it's not a BIOS issue.
View 1 Replies View RelatedI wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies View RelatedI installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies View RelatedI have recently upgraded the hardware of my zenbook from i5 to i7. Unfortunately the battery discharges very fast (30 min instead 3 h with i5) because the system turns all time at maximum speed (I guess).
Is there any power management update for Debian Jessie8.3 on i7 processors?
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
i did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies View RelatedPC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
Had Ubuntu installed, it worked fine but I had to format for a new partition (out of space) I program in Windows, I would consider myself a Windows geek, and would like to try out Linux. After I boot into setup, it stays at a black screen. It did that when I was installed Ubuntu, the first time. I don't know how exactly it ended up working, after a lot of different things I was able to get it to boot.
View 3 Replies View RelatedI have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
I'm trying to update an older laptop for my nephew. It was running Hardy Heron (Ubuntu 8.04 LTS) successfully.
However, after installing a clean copy of Lucid Lynx (Ubuntu 10.04 LTS), the boot process halts almost immediately with a black screen. There is no blinking cursor and no hard-drive activity.
When I hold down the "Shift" key after the rebooting the computer, I'm able to edit the grub2 boot options.
When I remove the "quiet" boot option, I'm able to see about a page of text before the boot process halts and displays the black screen. Here is the last bit of text that appears just before the black screen:
Code:
...
Begin: Running /scripts/init-bottom ...
Done.
At this point, the font style changes slightly. Then the text is replaced by the solid black screen. There is no blinking cursor, and the hard drive activity ceases.
I've tried booting in rescue mode: This also halts at a solid black screen.
This is an older laptop: I had to boot the installation disc with the boot option "noapic" in order for the installation disc to run.
However, the installation seemed to run normally. I was able to finish installing the system. But, after removing the installer disc and rebooting, we were met with that solid black screen almost immediately after booting.
I used the minimal install disc: [URL]
I've verified the MD5 checksum for the disc image. And I've successfully used this same disc to install Ubuntu for my mother.
But my little nephew is left without a usable system.
Could we be missing a boot option?
I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
View 1 Replies View RelatedI am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.
When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.
With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?