I'm just wondering if it's possible to install "fedora"'s gnome-packagekit with it's GUI (gpk-application) in debian squeeze rather than installing "ubuntu" software center? Are there packages availabe in .deb file format in any repository?
View 2 Replies
I wanted to install TeamViewer (for Linux). I downloaded the RPM, but when I double-clicked on it to start the installation I got the following error: The name org.freedesktop.PackageKit was not provided by any .service files I Googled around for possible solutions but I couldn't find any. Does anyone know how to fix this error and install TeamViewer? I'm using openSUSE 11.2 with GNOME desktop.
View 1 Replies View RelatedTrying to install gnome-commander, but my terminal hangs with message
Loaded plugins: refresh-packagekit
I tried to google but did not find much info..I am using Fedora 11
When I try to install an application using the software center it simply does nothing when I click install. The following is the output in terminal when I click install -
Code:
jeff@sager-ubuntu:~$ software-center
WARNING:root:No styling hints for Raleigh were found... using Human hints .....
/usr/share/software-center/softwarecenter/apt/aptcache.py:40: GtkWarning: gtk_container_add: assertion 'GTK_IS_CONTAINER (container)' failed gtk.main_iteration()
WARNING:root:_on_trans_error: org.freedesktop.PolicyKit.Error.NotAuthorized: ('system-bus-name', {'name': ':1.103'}) is not authorized: org.debian.apt.install-packages
** Message: console message: undefined @1: ReferenceError: Can't find variable: showProgress
What is wrong? Fully up to date 10.04 32bit install.
Just got my 11.04 and tried to use some settings in Compiz. I`ve made these steps: Install the CompizConfig Settings Manager (ccsm) application from the Software Center. If you need assistance with installing the application, consult the software installation help, or review the Ubuntu Software Center Manual.
After you have installed the program, click the power icon at the very right of the panel and select System Settings. In the Personal section, click CompizConfig Settings Manager. In the Desktop section of the CompizConfig Settings Manager, click Ubuntu Unity Plugin, and select the Experimental tab.
I`ve clicked on the left side there was something like "enable plugin" or sort of. And my launcher, and the pane on the top dissapeared! I got nothing. Just the screen. Nothing is workin. What the f>..?
I'm new to debian. I just installed Debian 6 via a single CD image. For some reason, I cannot find any kind of application that allows me to select software or install it. I've tried the instructions in many different threads on how to install software including synaptic package manager, software-center, etc. None of them seem to work or maybe there is something that I don't understand about this process in Debian.
I've used Ubuntu, openSuse, and !# so I am relatively familiar with terminal and installing software using different methods, but am not used to not having any kind of package manager to work with. I've downloaded "Software Center" for debian but terminal will not dpkg the package, advising errors. How to install some kind of package manager; "Software Center" or Synaptic would be preferable. I really want to try out Debian and get to know this operating system.
I have a problem with installing application from so could software center just because in the line with the program there is no bottom install that is present in some programs. So could any body explain me why is so and what is necessary to do. i am relatively new in linux so no have much idea on using it.
View 10 Replies View RelatedBeen using Debian Squeeze for a few days now and I think it's a SUPERB distro. Everything works perfectly.
To my topic: "Software-center" hangs forever when I try to browse non-installed packages. A search on this forum shows that it's probably a non-solvable bug. No problem, I use Synaptic and am very willing to learn CLI apt-get commands. But for now, uninstalling software-center through Synaptic also wants to uninstall gnome (I assume "all of it"?), and I'm not going to agree on that!
Seems like such an unbelievably basic question, but a day of google searches as well as directly on this site with key word combinations like "jessie gnome application launch" or "jessie gnome launcher" has only yielded one remark somewhere that the only way to get any kind of custom application launcher working on a gnome 3.14 desktop is to copy an already existing one from an older gnome setup, such as Wheezy.
I know gnome is a bit limited compared to many other desktops, but besides this I consider gnome in Jessie very good and just can't believe the ability to customize application launchers could have really been made completely impossible to do. This single omission alone would make gnome extremely lame in my view, so I sure hope that is not in fact the way it is.
I've been Gnome user since I made switch from Ubuntu to Debian. But now I want to try xfce in Debian, but I do not know well what are alternatives for Gnome applications there. I haven't used xfce since Ubuntu 9.10 (Xubuntu).some alternatives for theese apps:
Archive Manager: (like file-roller)
Text Editor: (like gedit)
Screenshot: (like gnome-screenshot)
[code].....
somewhere along the line I disabled the description that appears below icons in all gnome application menus. I don't know how I did it, and I cannot seem to find the way to undo it I would like full descriptions under the icons in my menus. I tried System -> Preferences -> Appearance but could not find what I was looking for. I also tried System -> Preferences -> File Management. Neither seems to help me out. This is not an urgent problem, but an annoying one.
View 4 Replies View RelatedI've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
app deployment on Linux/debian and I'm using Debreate to create .deb packages which works fine. I install the software itself to /usr/bin but want to install the program's database to /home/username/myapp/ The problem is it that I don't know how to add the env variable 'username' to the target path. What is the exact syntax for this installation path?
View 3 Replies View RelatedI currently run a dual boot system Windows Vista & Ubuntu, I am trying to use the Playonlinux application in the software center, for those who may not know what this is, it allows you to install windows application (ie games) on your linux system.. but im getting an error when installing software, it keeps saying that there is not enough space on my HD to install then shows me the current amount of HD space that is availible, its only saying i have about 7gigs free, but i have well over 200gigs free on my HD, Im guessing that Ubuntu made a partition to install on, and it didnt make it big enough. (Just my best guess) Is there a way i can increase this partition size? without having to reinstall? or am i just totally off track and should be trying something else!
View 6 Replies View RelatedI'm having problems with the ubuntu software center. When I try to install any software it does nothing when I click the install button. I can click on the visit website page and download the source and compile it manually but I was under the assumption that you could use the install button and it would do it automatically for you. Am I wrong? I am running UNR 9.10 on an Acer Aspire One 110-1588.
View 1 Replies View RelatedHad a boot failure last night; first one for 11.3 64 bit:
Aug 23 19:32:06 suse1 gnome-session[4822]: WARNING: could not read /etc/xdg/autostart/ksmolt-autostart.desktop
Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: unable to create keyring dir: /home/rthornto/.gnome2/keyrings
Aug 23 19:32:06 suse1 gnome-keyring-daemon[4800]: couldn't write to file: /home/rthornto/.gnome2/keyrings/login.keyring: No such file or direct
ory
[Code]...
I am getting no packages listed in Gnome application manager gpk-application 2.27.2. I have tried 'yum clean all' and get the following error messages.
View 3 Replies View RelatedIs it possible to suggest an application to appear in the "Featured Applications" list in the Ubuntu Software Center?I would like to suggest that "OpenShot Video Editor" is included.
View 2 Replies View Relatedthis is a kind of strange question but is it possible to use up2date-gnome-applet on Fedora 13? I loved the clean and stable update mechanism used in FC 3 but I am unsure whether it will also work with F 13.For those who can't remember: Take a look at the red icon in the panel:I queried yum for rhn-packages and found the following:
Code:
$ yum search rhn
Geladene Plugins: presto, refresh-packagekit
================================= Matched: rhn =================================
rhn-check.noarch : Check for RHN actions
[code]...
Can I use one or more of the packages to get the old mechanism back? I tried to find some information about yum-rhn-plugin but I was unable to find a way to use the old up2date-applet.
Whenever I try to install an .rpm by double-clicking on it, a window comes up with this error:
'The name org.freedesktop.PackageKit was not provided by any .service files'
There is a file called org.freedesktop.PackageKit.service in /usr/share/dbus-1/system-services, so I know that it exists. Why can't dbus find it?
Running openSuSE 11.2 with GNOME.
Is there a way to install packages with PackageKit without having to put in the root password every time I want to install a package? I set up sudo so I can install packages in a terminal without having to put in a password but I dont want to go to the terminal every time I want to install a package. And I dont want to become a root user or anything I just want to install packages without having to put in a password.
View 4 Replies View RelatedJust installed 11.3 KDE 64bit and I get this error:
PackageKit Error internal-error: Installation aborted by user
I didn't do anything. What does this mean? How can I get Package Kit installed?
Im trying to run yum install PackageKit and i keep getting :
Error:"" ""
I've Debian 7.8 and i tried to install gnome URL... I've used tasksel but after rebooting i don't see any change...also logging in with "GNOME" or "GNOME Classic" instead of "Deault system" nothing happen... i tried to run Code: Select allgnome-shell --replace and the gnome shell appeared but flicking,and to make it stop i had to reboot.I think i should try to install the radeonATI driver following this tutorial URL...
View 1 Replies View RelatedJust wanted to know whether I can install KDE along side GNOME in Debian Lenny? The reason I ask is Gnome was installed by default and I didn't get an option to install KDE during the text based setup. So I put in the dvd and to see if there was an option to install kde, and it does Install with KDE Environment (to that affect). Would it currently erase the current Debian installation with Gnome or will KDE install as a second desktop option to use?
View 2 Replies View RelatedI installed Debian 6.0.1.a on Friday, but the problem is that installing xfce installed a few packages that have nothing to do with it, like Brasero and metacity. I'm using the xfwm but why were these extra packages installed? All I installed at the time were wicd, gdebi, xorg and xfce4. Everything is working fine...but why the extra bits?
View 11 Replies View RelatedI installed Mono on Debian 8 using apt-get. Specifically, I followed these instructions: [URL]..
Then suddenly, my entire machine locked up . . . I gave it a few minutes and then cold booted. It came up to a login prompt but no gnome. sigh. So, I use apt-get to uninstall all of the mono stuff and I also did apt-get clean, apt-get autoclean, apt-get autoremove . . . and rebooted . . . to a login prompt.
So, I installed gnome using apt-get install gnome-core and then after a reboot I got gnome again.
However, every time I log in, I see an "Oops" message flash briefly and then the GUI loads. Everything seems to be ok . . . but I don't like seeing that message; it says something like "something went wrong, please log out . . ."
I kind of dug around /var/logs a little and there are some error messages in kern.log files . . . how I can get my machine back to the state it was in, i.e., not flashing an Oops message when I authenticate?
I just started to use debian at what i would call full speed as soon as i received my copy of the debian 6.0.0 DVDs. i installed it on two offline desktops, one for a friend. i have been able to install certain softwares that don't come along with the distribution such as firefox 4, openoffice 3.3, the latest jdk_update_24, and others, and i've been able to configure them to work well i think... but now, i learnt of the new gnome 3 that has been released recently. i've ofcourse downloaded all the source files at [URL] but now am facing a problem of how i can install these on to the debian computers (they don't have any internet connection).
View 4 Replies View RelatedHowto install gnome-mplayer under Lenny with Gnome?
View 1 Replies View RelatedI'm planning to replace kde with gnome so my plan is to visit Yast pattern view check Gnome Desktopand Gnome Base System then unchecking Kde4 Desktop and Kde base system.i'm seeking stability I know openSUSE has it but no with kde.is this the right way to replace my desktop environment , I will not download the gnome iso and make a new installation
View 4 Replies View Related
