when I try to install a package, I've the message The following packages have unmet dependencies:package-xy: Depends:lib-something (>= version_number) which is a virtual package.
View 14 RepliesI'm trying to install a package the depends on libgfortran1. libgfortran2 and libgfortran3 are installed on the system, but that doesn't satisfy the dependency. Here's the error: The following packages have unmet dependencies: r-base-core: Depends: libgfortran1 (>= 4.1.1-12) but it is not installable Recommends: r-recommended but it is not going to be installed Recommends: r-base-dev but it is not going to be installed is there a way around this problem, (eg; editing a dependency list to libgfortran3)? Or is this version of r-base-core effectively broken?
View 5 Replies View RelatedI've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
Tried to run sudo yum update and got this error on two different Fedora machines
Code:
Error: Package: createrepo-0.9.9-4.fc15.noarch (updates)
Requires: yum >= 3.2.29-8
[code]....
When using apt-cache to find the reverse depends of a package, it would only show dependencies for packages in repositories that you have added wouldn't it? It wouldn't show that a package in a repository that your apt has never heard of depends on it?
I'm a slackware guy and don't use apt but am helping someone else and I almost told them that before I realized that I just made it up out of the blue.
however I am not looking to dist-upgrade, I merely want one package from Sid on my Lenny server. Namely, mantis (version 1.1.8 is in sid, 1.1.6 in main/stable)
View 2 Replies View RelatedI have tried install libsub-install-perl and libparams-util-perl but get Error. Now I want remove it from the list when I tried apt-get upgrade. Where I can remove from this entries?
View 2 Replies View RelatedI just setup a new squeeze debian 6 server, it will work as proxy server with squid. But I have an issue when i want to install sarg (sarg-report), i cannot find the package thru aptitude/apt-get, however it was present in lenny distribution. Is it a miss in squeeze, is it discontinued or should I add a specific entry in /etc/apt/sources.list? (currently squeeze main, squeeze/updates main)
View 3 Replies View RelatedAfter the successful installation of debian squeeze 32 bits from the first dvd, I proceeded to try to install the package noip2, but my surprise was not in the repositories that I have, but when used lenny if I had it.Below show my repositories:[URL]I dont know if i need another repository or i am missing one
View 1 Replies View RelatedI recently tossed Ubuntu for Debian Unstable for my personal machines and I'm having trouble building Emerald into a package. I've already configured and installed the package (using the usual ./configure, make, make install) but I wanted to make a deb for future use (for myself and for others). However every time I try to run dpkg-build I get the following error message.
dh_install -pemerald --sourcedir=debian/tmp
dh_install: emerald missing files (usr/bin/*), aborting
make: *** [binary-install/emerald] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
[Code]...
why it is that when I download the sendmail debian source package for etch and build it using dpkg-buildpackage -b -nc I get a 645543 byte sendmail executable whereas when I download the sendmail binary that is 703292 bytes.
View 1 Replies View RelatedI had my laptop turned on. The battery turned out low and my pc shut down (not in the correct way obviously)! Plus: I was running apt-get upgrade but it should have done before shutting down. Now, I restarted my pc and under nm-applet I see: "wireless network: device not ready" and at login I get the message: "Network configurations failed. org.freedesktop.dbus.error.spawn.PermissionsInvalid: the permission of the setuid helper is not correct" and that I could not be able to connect via bluetooth (but actuallyu I can't use wireless!)! What to do guys? I use debian squeeze. I read from someone using kubuntu that he solved the problem reinstalling all the packages with "dbus" in their name. But I don't know if my ethernet will work yet!
Update: if I run dpkg-reconfigure dbus, it tells me that dbus package is corrupted or not complete: could be the issue?
I am trying to upgrade a Debian 4 server to v5 with the instructions from document.However, I am having trouble with getting an installed package upgraded to the latest version for the current release (see error below). And I am afraid to upgrade the distribution if I can't get this package to upgrade. One thing I did notice in the error was, "Aborting downgrade from (at least) 5.1 to 5.0". The dpkg --get-selections command showed that both MySQL 5.0 and 5.1 were installed (I don't know how or why, as I was not the one to setup this server), but 5.0 was the one running. So I've since uninstalled v5.1 but that error still shows up when I try to do an apt-install upgrade. I don't know that this is what is causing the package upgrade to fail but I thought it worth mentioning.
View 7 Replies View RelatedI'm rather new to Linux...especially Debian. I've been running Kubuntu for about 1 month now and I wanted to try out Debian as well. So I installed it on a laptop (Downloaded the 6 DVDs). Now, how do I add some repositories to Synaptic so I can update my software? Also, is there a list of repositories? So far, every time I want to install something I need to insert one of the DVDs.
View 3 Replies View RelatedI changed to testing repository in my Debian 6.0 and I used command "apt-get update". Now, everytime I want to do something with apt-get or aptitude, I receive this:
With apt-get:
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/ftp.cz.debian.org_debian_dists_squeeze_main_i18n_Translation-cs
E: The package lists or status file could not be parsed or opened.
or with aptitude:
[ ERR] Reading package lists
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/ftp.cz.debian.org_debian_dists_squeeze_main_i18n_Translation-cs
E: The package lists or status file could not be parsed or opened.
E: Couldn't rebuild package cache
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/ftp.cz.debian.org_debian_dists_squeeze_main_i18n_Translation-cs
E: The package lists or status file could not be parsed or opened.....
In an attempt to minimize my system when I mark for removal libcups2 using synaptic it asks to install 7 not authenticated packages, however if I choose mark for complete removal it asks to install the same 7 packages and remove every single installed package from epiphany to gimp to zenmap. Any ideas as to whats going on with that?
Squeeze 6.0.1
kernel 2.6.32-5-amd64
intel core i5
[code]...
I have some problems to start my dovecot server on Debian 6.0.1 I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".
When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d: "E: Unable to locate package dovecot-pop3d".
I did apt-get update ant apt-get upgrade but I'm receiving still the same error when I want to install pop3d.
It's interesting because there were no problems to install and run dovecot server on earlier versions of debian.
I want to build my own binary package that replaces several from the repositories.But then whenever I install something that depends on libffado2, aptitude wants to uninstall mypkg and install libffado2. Why doesn't Provides work here?
View 3 Replies View RelatedI have this package dependency question for a while. I have brand new Squeeze system. I selected desktop during installation. Gnome is default system but I turned off gdm3 and uses fluxbox as window manager. I understand if two packages are tied together funtionally so that removal of either package terminates one feature. Above cases, many small packages only depends on the core packages. The core packages work fine without games, other programs.
There are so many programs that I want to remove in the system. For examples, ekiga is a VoIP program that I never use it. When I tried to remove it using apt-get or aptitude, it suggests entire gnome packages will be removed also, which is illogical. The only solution I found is I need to manually remove the package files. I haven't tried it yet.
I installed few days ago Debian Jessie (Linux server-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux) for some tests.I tried to install iptables-persistent with the command "apt-get install iptables-persistent".During the install process, I got the following message :
Code: Select allPreconfiguring packages ...
Selecting previously unselected package netfilter-persistent.
(Reading database ... 31677 files and directories currently installed.)
Preparing to unpack .../netfilter-persistent_1.0.3_all.deb ...
Unpacking netfilter-persistent (1.0.3) ...
Selecting previously unselected package iptables-persistent.
[code]....
Some talks about cups, acpid, ipv6 or systemd but nothing has solved the issue in my case.I used iptables-persistent many times with older debian versions.
I installed debian 6 (stable) on laptop with dual boot Windows 7 and Debian. when i was installing debian ,every things were ok and installed correctly (such as DHCP configuration) before installing APT package configuration part. error is about mirror zone! i checked it and tested with all mirorrs in list but i couldnt config APT yet.i did installation without APT.after booting debian i have apt-get and aptitude commands but didnt work commands like apt-get update or aptitude install ... or aptitude update .... when i ping an ip , it dosent answer cause of errors .(but i have network connection on windows7 correctly. im using connection wired.
View 1 Replies View RelatedI want to remove a keyring package I installed from a repository that I no longer want to use. However, I cannot remove it:
# apt-get remove -y --force-yes debian-xray-keyring
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be removed:
debian-xray-keyring
0 upgraded, 0 newly installed, 1 to remove and 130 not upgraded.
After this operation, 49.2 kB disk space will be freed.
(Reading database ... 181076 files and directories currently installed.)
Removing debian-xray-keyring ...
gpg: key "AB8F901D" not found: eof
gpg: AB8F901D: delete key failed: eof
dpkg: error processing debian-xray-keyring (--remove):
subprocess installed pre-removal script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing:
debian-xray-keyring
E: Sub-process /usr/bin/dpkg returned an error code (1)
VirtualBox is awesome tool for experiment and learning Linux.On the Linux guest OS, I installed standard system without Xorg.i expected it remove all the packages that come along with gnome-terminal previously.Only gnome-terminal was removed, 750kB free space. Now the system have 149MB packages as waste data IMHO.It doesn't look right to me.
View 4 Replies View RelatedI've got Debian Sid x64 on my machine. Problem is that in my KDE setup several programs don't work, namely System Load Viewer plasmoid, plasmoid with temperature info and update-notifier-kde. System Load Viewer always shows 0% RAM and swap usage, as well as no processors, temperature sensors plasmoid shows no sensors available even after I installed lm-sensors and run sensors-detect, update-notifier-kde doesn't show any notifications even if I run aptitude update manualy. I might be mistaken but it seems to me that these three programs are not working because of some common reason, most likely some policy package either missing or misconfigured, but I can't figure out what is it.
View 4 Replies View Relatedi wanted to install zsnes emulator on natty 64, but it turns out there is no such package. so i tried zsnes_1.510-2.2ubuntu3_i386 using "force architecture" command but it failed due to dependencies problem. later i found amd64 version of zsnes deb package. now when i try to install it it says "it's not co-installable with zsnes:i386 1.510-2.2ubuntu3 (Multi-Arch: no) which is currently installed". i cannot find zsnes:i386 package in synaptic, removing or purging the package doesn't work (Virtual packages like 'zsnes' can't be removed), cleaning cache with apt-get clean doesn't change anything.
View 1 Replies View RelatedI'm running squeeze. I installed from the netinstall cd (graphical install). I need to get pulseaudio, so here is my question: Is there any additional configuration you need to do after installing the "pulseaudio" package. (to integrate with alsa, gnome integration, multimedia keys etc.)?
View 3 Replies View RelatedIn red hat linux server 6. I start up virtual manager and I get below error prompt:
Package required for KVM usage. The following packages are not installed
qemu-kvm
These are required to create KVM guests locally. Would you like to install them now.
I press yes but the package cannot located ...
So, I have install the qemu-kvn-0.12.1.2.113.el6_0.8.src.rpm already.
I use command rpm -ivh XXX.rpm to install.
In red hat linux server 6. I start up virtual manager and I get below error prompt.
Package required for KVM usage
The following packages are not installed
qemu-kvm
These are required to create KVM guests locally. Would you like to install them now. I press yes but the package cannot located ...
So, I have install the qemu-kvn-0.12.1.2.113.el6_0.8.src.rpm already.
I use command rpm -ivh XXX.rpm to install.
I need to install the following dependencies for synspam on Ubuntu 9.10 karmic server:
Code:
sudo aptitude install nfqueue-bindings-perl libsys-syslog-perl libappconfig-perl libnetpacket-perl libnetaddr-ip-perl
dpkg -i synspam_version_all.deb
Of these, only libnetpacket-perl is not packaged for Ubuntu 9.10 karmic.
Is this functionality present in another 9.10 package with a different name? 10.04 Lucid does have the package: [URL]
I switched a working Lucid KVM guest from linux-server to linux-virtual and it could not mount root at boot time and issued a panic instead. Switching back (booted from CD and used "rescue a broken system") revived the VM.
My first guess is that some DM driver module needed for LVM is missing from the linux-virtual package.