Debian Hardware :: Nvidia Fan Running At 100% When Returning From Suspend?
Sep 11, 2011
I installed the stable version of Debian last night (Debian GNU/Linux 6.0 l) and whenever I come out of suspend, the video card's fan stays at full speed. When I do a regular reboot, this doesn't happen.
Normal behavior is for the fans (cpu and gpu) to go to full speed for a few seconds and then settle on a slower (quieter) speed.
The hardware involved is:
Dell Vostro 400
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2)
The install is vanilla (as in "I haven't messed with drivers or configuration files - yet"). Also, keep in mind that I'm a newby - I've just switched to Debian after about two months of Ubuntu and am not too familiar with where everything is or what commands I need to do what, so instead of telling me to change the sync parameters in the nvidia configuration, I need to know exactly what parameter in exactly what file.
View 1 Replies
ADVERTISEMENT
Feb 19, 2010
After returning from suspend to disk, RF devices (wlan and bluetooth) are disabled. Running lspci indicates that no wireless network device is available, and no drivers are loaded. Furthermore, the LED on the front of the laptop remains off - this is always on when RF devices are available. There is an Fn-F1 function key to toggle wireless, but this does not function to either enable or disable.
Rebooting the system does not re-enable the RF devices, and there is no option in the BIOS. The only workaround I have at present is to boot into windows vista and use the Fn-F1 function key. This pops up a small hotkey utility with the option to disable/enable the wi-fi and bluetooth (independently). Upon confirming the dialog, the RF device light immediately illuminates. Rebooting into fedora and wireless devices are working once again.
I am running kernel 2.6.31.12-174.2.3.fc12.x86_64, with the latest compat-wireless drivers. I can provide much more debug information (dmidecode, acpidump, boot logs, lspci etc...), I am just unable to determine what is relevant
# rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
[code]....
View 2 Replies
View Related
Feb 26, 2011
I'm using a dell latitude d630 with an nvidia quadro 135M card. I'm able to suspend without any problems while running the X server. If I try to suspend on console without the X server running, the laptop wakes up to a blank screen. The screen remains blank and my only resort is to type sudo halt (with the screen off).I'm using the proprietary nvidia driver with the nvidia-kernel package on testing.
View 4 Replies
View Related
Feb 20, 2011
I am running Debian Squeeze with 2.6.32-5 amd64 kernel with GCC 4.3.5 (the same one used to build the kernel) installed. I have a nVidia GTX 470. I'm trying to install the latest nVidia drivers (260. ...). I've never installed noveau or any other open source nVidia driver. Here's what I've been doing:-Change the "Driver "nvidia"" line in /etc/X11/xorg.conf to "Driver "vesa""-Restart system in single user mode as root, no services running-cd to the directory with nvidia-Linux-x86_64-... .run (what I'll call nvidia.run)-enter "sh nvidia.run --uninstall"-enter "CC="/usr/bin/gcc-4.3" && sh nvidia.run"It starts up and it compiles the kernel 100%. Then it says this:
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
[code]....
View 4 Replies
View Related
Sep 11, 2014
I am developing a script to automate some database setup, but I have an issue I cannot figure out. I prompt for some input with whiptail and select a default if nothing is entered. However, if you do not enter anything, it normally returns 0, but this time it is returning an empty value.
Code: Select all # This one does work!
 # Set the source path
 TMPPATH=$(whiptail --backtitle "Linux Build Configuration"
  --title "Source-Code Path"
  --inputbox "Default: $SRCPATH" 0 60
  3>&2 2>&1 1>&3)
[Code] ....
So what is wrong with the second code?
View 1 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Sep 20, 2010
I have a strange iptables issues. I have just built a new Debian install and starting adding some real basic rules (see below) the problem seems to be that the localhost itself can't get any returning traffic. That is, it seems to be allowed outgoing traffic but not the connected, returning traffic. Ordinarily allowing Established Connections would resolve this, see the rule below, but it hasn't. Why this doesn't work. Removing the last DROP in the INPUT chains obviously makes the traffic work!
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -j ACCEPT -p tcp --dport 22
iptables -A INPUT -j ACCEPT -s x.x.x.x
iptables -A INPUT -j ACCEPT -s x.x.x.x
iptables -A INPUT -j ACCEPT -s x.x.x.x -p tcp --dport 80
iptables -A INPUT -j ACCEPT -s x.x.x.x -p tcp --dport 8080
iptables -I INPUT 1 -i lo -j ACCEPT
iptables -A INPUT -j DROP
View 3 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Apr 11, 2010
The PC is a Toshiba laptop model# x205-s9359 running 11.2, KDE 4.3.5. Its video card is an nVidia 8700 GT. For two years now I've been plagued by random flashes, flickers and even missing scan lines on my screen when I use the nVidia drivers (up to and including 195.36.15), so lately I've been using the nv drivers. I miss the effects, etc. but I can live with that. At least I can get my work done, even if the display isn't as fancy as I'd like.
- When I run the nv drivers I can't suspend the PC to RAM or Disk. This means a lot of wasted time waiting for the machine to shut down and reboot every time I leave my desk for any length of time. If I try to suspend to RAM the only thing that happens is that the network connection disconnects then reconnects immediately. Here's the log file....
- If I try to suspend to Disk the PC appears to suspend as expected, but when it resumes it hangs before restarting X, and there's no keyboard or power button response. I have to use alt-prtsc-reisub to reboot. When the reboot is complete the screen shows all the windows, etc that were present before the suspend. Here's that log file....
-When I run the nVidia drivers the suspend/resume functions work perfectly, but I have to put up with all the problems described above. Here's the log file for Suspend to RAM with nVidia, and here's the one for Suspend to Disk.
I've spent hours searching for clues in these forums, on the openSUSE.org site in general, at KDE.org and with Google and I'm sorry to say that most of I've found is horribly out of date, and/or it's way over my head. or (worst of all) not even dated, so I've no idea whether it's current info relevant to my situation or so out of date that I might do real harm if I were to trust it. (RANT: Is it too hard to put a date on an article?... end of RANT) I'd be quite content to use the nv drivers if I could solve the power management issues, but I'd be equally happy to solve the flickering etc. with nVidia drivers.
View 2 Replies
View Related
Nov 23, 2010
I have two machine, host1 and host2, that are running Debian 3.1 in an HA setup. AFAIK, they are exactly the same. In the course of tracking down some monitoring bugs, I discovered that on host2 "netstat -s" gives
[Code]..
View 1 Replies
View Related
Apr 1, 2016
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Oct 25, 2010
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies
View Related
May 23, 2011
3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
View 1 Replies
View Related
May 2, 2010
I installed the Nvidia driver. When I click on the "Monitors" package it then asks if I want to use my graphics drivers vendor's tool. I say yes and then it pops up the Nvidia X Server Settings dialog. In that menu it indicates I need to run nvidia-xconfig from root. I did this and then restarted the xserver but to no avail I get the same message every time I try to run "Monitors", that I need to run nvidia-xconfig.
View 9 Replies
View Related
Aug 6, 2010
Sometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies
View Related
Oct 3, 2009
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
View 6 Replies
View Related
Sep 11, 2011
Trying to start a running installation of virtualbox I get:
And it seems that it doesn't work with the new 275 build I got pushed when updating. Updating virtualbox didn't help. Besides uninstalling the 275 version of nvidia and installing the 270.
View 4 Replies
View Related
Dec 15, 2009
I've been trying to figure out the cause of system hangs with slack 13 for a a week or so. I get random total freezes with the keyboard LED's blinking at me and the only solution is to do a hard-reset. I was using a self-compiled 2.6.31.6 kernel on 32bit Slack with similar results, but thought it had more to do with several bad starts as I got used to Slack's way of doing things... eventually I decided I'd made enough bad starts with that installation and after reading a bit about _current fixing some stability issues added another installation to my machine using Slackware64 and upgrading to _current. It worked great, then I installed the NVIDIA proprietary driver. The system hangs are back.
Sometimes they happen quickly, sometimes they take hours, sometimes while I'm working, sometimes when the machine has been idle for hours. For a couple of days I've been going back and forth between the NVIDIA propreitary and the nv driver. I've run memtest86 for 4.5 hours and not a single error, I'm running this on a new HD, I even upgraded the case fan (the old one was starting to complain!).
I've also installed different versions of the driver 185.x.x, 190.42.x. I've used slackbuilds, I've used "sh NVIDA.xxx.RUN" I've said "yes" to everything the installer asked, I've said "no".
So far no hangs with the nv driver. I've been leaving one or the other running at all times and no hangs with the nv driver, but within hours with the proprietary driver.
All that is to say I'm confident the issue is with the NVIDIA proprietary driver, OR something in my kernel options that only shows up when I'm using the NVIDIA driver.
Is anyone else running this successfully?
SLACKWARE64 kernel 2.6.32 (same behavior on 32bit with 2.6.31.6) compiled kernel with "make oldconfig" then "make localmodconfig" BEFORE the NVIDIA driver was installed. ext3 filesystem (same behavior with ext4 on previous installation)
View 14 Replies
View Related
Sep 30, 2015
I'm running stock Debian 8.2 with GNOME DE on an Acer ES1-512 series laptop. Whenever I attempt to go into suspend, either by closing the laptop lid or holding ALT when clicking the power button in the top-left system menu on the desktop, my laptop briefly flashes the default GNOME lock screen, fades to black, and then hangs there. Usually, when my laptop would actually suspend, the power indicator light would change from blue to orange and slowly fade in and out. However, now it just sits on blue. There is no way to re-awaken the laptop from this state, and I have to force shutdown by holding the power button.
Running Code: Select allgrep -i error /var/log/messages gives me:
Code: Select allSep 28 17:59:57 debian gnome-session[1188]: [1504:1536:0928/175957:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 18:17:50 debian gnome-session[1188]: [1504:1536:0928/181750:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 21:27:52 debian gnome-session[1188]: [1504:1536:0928/212752:ERROR:channel.cc(307)] RawChannel read error (connection broken)
Sep 29 14:21:51 debian gnome-session[1188]: [1504:1536:0929/142151:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
[code]....
View 1 Replies
View Related
Mar 10, 2010
I have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.
View 11 Replies
View Related
Jul 5, 2010
On my Sid laptop with iwlagn as the wireless driver, I use gnome with network manager. I lost all wireless capability when laptop failed to come out of suspend.
I have the power manager set up to suspend when the lid is closed. This morning when I opened the lid I got a blank screen with a blinking cursor. Without thinking, I forced shutdown with the power button. I know, don't say it. When I booted up I had no wireless at all. lspci doesn't recognize wlan0 lsmod shows iwlagn is still there I performed the following:
# modprobe -r iwlagn
# modprobe iwlagn
Now I have two drives on this laptop and Squeeze is on the other drive. When I boot into squeeze I have wireless activated.
View 3 Replies
View Related
Apr 29, 2011
I have already installed gnome-power-manager.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
How to add suspend and hibernate options?
View 7 Replies
View Related
Feb 16, 2011
Is there an "official" way to add suspend and hibernate functionality to the KDE logout/shutdown menu in Squeeze? What packages do I need?
ps. My computer is not a laptop - it's a normal desktop machine
View 1 Replies
View Related
Feb 17, 2011
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies
View Related
Jun 28, 2010
I'm running a XFX Nvidia GTS 250 512MB card. I have installed Ubuntu 10.04 and so far I'm loving it - apart from one small issue. Using 195.36.24 drivers, I cannot control the fan speed - it keeps running the card pretty hot - hitting 75 deg. C when one OpenGL game is running. The fan barely goes over 60% speed - I'd rather have it run at 80% constantly to keep the temps under control.
There are drivers on nvidia website which "seem" to be a lot newer : 256.35 (using 64bit Linux) - are those "direct replacement" for the 195.36 which Ubuntu installs by default?
I have a well ventilated case (1x120mm pulling air, 1x120mm pushing out, neat cabling, etc). I have found nvclock but no joy - even with -force it doesn't want to change fan speed.
View 3 Replies
View Related
Jan 9, 2011
I just replaced the ATI videocard by a NVIDIA GT430 videocard on my Slackware64 13.1 htpc and cant get the card to be detected by alsa so I have no sound through HDMI. Only the onboard devices are detected. Alsaconf does not see the card and the Kmix application does not see it either. Only lspci & cat /proc/asound/cards see it but seems not able to use it...I am using the stock slack64 13.1 kernel 2.6.33.4 and I've recompiled alsa from sources to version 1.0.23. What do I need to do to get this to work??aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: pcsp [pcsp], device 0: pcspeaker [pcsp]
[code]....
View 3 Replies
View Related
Oct 9, 2015
I have a quite simple installation of Debian 8 Jessie XFCE and the resume from suspend is not working 9 out of 10 times. The system is single booted if that matters. I have found a few solutions to this problem but they were not suitable to my case as I don't have an Nvidia GPU but only Intel Onboard:
Code: Select all# lspci -v
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
  Subsystem: Hewlett-Packard Company Device 2818
  Flags: bus master, fast devsel, latency 0
  Capabilities: [e0] Vendor Specific Information: Len=0b <?>
  Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
  Subsystem: Hewlett-Packard Company Device 2818
Â
[CODE]..
When I try to resume, I can hear the system booting but I can't see anything on the screen and the keyboard is not working either (no light on Num Lock and Caps Lock). The only option is to press the power button for a few seconds to stop the machine and then push again to start booting again.
View 13 Replies
View Related
Feb 19, 2016
I followed a guide with the hopes of my computer waking from suspend after a defined number of seconds (for testing purposes, 4 seconds).
Per the guide, I've added a file: /etc/pm/config.d/00-use-suspend-hybrid
Code: Select all# Always use suspend_hybrid instead of suspend
if [ "$METHOD" = "suspend" ]; then
 METHOD=suspend_hybrid
fi
# The delay after which hibernation gets triggered (default: 900 seconds, 15 minutes):
PM_HIBERNATE_DELAY=4
After four seconds of suspend, it continues suspending, and doesn't go into full hibernate.
View 4 Replies
View Related
Jan 28, 2010
Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.
View 8 Replies
View Related
