Debian Multimedia :: "Unable To Load Nvidia.ko" When Running NVIDIA*.run?
Feb 20, 2011
I am running Debian Squeeze with 2.6.32-5 amd64 kernel with GCC 4.3.5 (the same one used to build the kernel) installed. I have a nVidia GTX 470. I'm trying to install the latest nVidia drivers (260. ...). I've never installed noveau or any other open source nVidia driver. Here's what I've been doing:-Change the "Driver "nvidia"" line in /etc/X11/xorg.conf to "Driver "vesa""-Restart system in single user mode as root, no services running-cd to the directory with nvidia-Linux-x86_64-... .run (what I'll call nvidia.run)-enter "sh nvidia.run --uninstall"-enter "CC="/usr/bin/gcc-4.3" && sh nvidia.run"It starts up and it compiles the kernel 100%. Then it says this:
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
[code]....
View 4 Replies
ADVERTISEMENT
Feb 19, 2011
I am running squeeze on a PC 1386 and installed nvidia by using the packages in unstable. I was able to install nvidia and there was no error until the time I started X. The error is unable to load module "nvidia" (module does not exist, 0).
I looked up the log for Xorg and it says Unloadable Module "nvidia".
I spent the entire 24 hours to fix it because this is my office computer and I practically done all the stuff found in the forums. I already did nvidia-xconfig to no avail. I even edited xorg.conf manually and still it was not up.
I have some suspects however which are:
1. Different versions between kernel and nvidia (but since I did it the debian way then I should not have any problems).
2. Nvidia-glx is unusable in Squeeze, so does it mean I go for the unstable distro?
3. Or I miss something crucial on how I installed it?
By the way, I installed Nvidia because I am using a SAMSUNG 21' LED monitor.
View 14 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Aug 31, 2010
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
View 2 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Nov 29, 2009
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
View 11 Replies
View Related
May 16, 2010
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
[Code]...
View 5 Replies
View Related
Jul 25, 2010
I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?
View 14 Replies
View Related
Jul 23, 2010
This nvidia driver is driving me nuts... I have tried everything I can think of including multiple solutions from threads.
I have a GeForce FX5200 with the nvidia-current drivers installed. On boot I receive the following error messages... code...
If I try and open the nvidia server settings I get the following message.
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
In Jockey I get:
The driver is activated but not currently in use.
I am using headers 2.6.32-23 and have updated to grub2 (something that seems to have fixed a mismatched header issue for others). I have uninstalled and reinstalled drivers, edited the xorg.conf with nvidia-xconfig as well as manually and I don't know what else to do... any suggestions would be appreciated... 640x480 is crap.
View 2 Replies
View Related
Dec 6, 2010
I've been using kubuntu for a while, and I've been having this issue since the release of the 2.6.32-23 kernel. Originally, I thought it was related to my raid array and this bug: [URL] I'm still not convinced they're not related, but there is also apparently the possiblity of an nvidia driver issue. Previously, I rebooted infrequently, and I had a spare hard drive installed, so my grub menu would always appear (as it detected an alternate OS on this drive) and it was trivial to select the 2.6.32-22 kernel. Since I installed all updates, including the -35 kernel, it ran update-grub and now I have to press shift when I reboot. Specs/Summary:
Kubuntu 10.04
amd64.
nvidia driver 195.36.24
RAID 1 (linux software raid)
kernels installed: 2.6.32-21 - 2.6.32.25
when I boot with -22 or earlier, everything works great. when I boot with -23 or later, I get the kubuntu splash screen, followed by it switching to tty2, then I get it switched back to where the X screen should be, with the system log displayed, and then it switches back to tty2. After installing -35, I panicked a bit as I'd never had the grub screen not show (not knowing about the shift key), and so I poked around logs and it showed nvidia driver errors. I tried removing my xorg.conf file and rebooted, and I got the desktop to show again. I prefer the nvidia driver as I sometimes use dual monitors.
View 7 Replies
View Related
Dec 31, 2010
I am trying to setup a computer with xubuntu 10.10 for my dad. It is mostly working, but flash animations/games run somewhat poorly. I think I might be able to fix this by using the non-free nvidia drivers, but I cannot seem to get them installed.
Sysinfo reports that the video card is an nvidia geforce mx200, so I downloaded the nvidia 96 driver package from the repositories, ran the configuration program, & rebooted. As you may guess, x did not load.
I have been working on this intermittently for a few weeks, & I do not remember everything I might have tried to fix it, but here is what I am sure of:
Sysinfo reports that the video card is an nvidia geforce mx200
when i try "sudo modprobe nvidia," I get the message "FATAL: Module nvidia not found." "sudo modprobe nvidia-96" gives no such error.
When I check the Xorg.0.log, I find:
The nouveau driver does not seem to work either, but if I remove the xorg.conf file, x works okay. How to get Flashplayer running more smoothly.
View 6 Replies
View Related
Jun 7, 2011
I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?
View 3 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Apr 17, 2010
Laptop with Nvidia integrated GO 6100. Now stuck in low graphics mode.
Uninstall/reinstall ENVY. No joy.
"Hardware Drivers" reports that Nvidia drivers version 173 are activated at the moment, but not in use. Got the same report from the 185s. 'nvidia-xconfig' produced no results.
Not sure where to go from here. Please assist.
On a positive note, my onboard Broadcom wireless is working without ndiswrapper.
View 2 Replies
View Related
Oct 15, 2010
I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:
WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.
[code]....
When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.
View 1 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Feb 17, 2010
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
View 9 Replies
View Related
Jun 28, 2010
I'm running a XFX Nvidia GTS 250 512MB card. I have installed Ubuntu 10.04 and so far I'm loving it - apart from one small issue. Using 195.36.24 drivers, I cannot control the fan speed - it keeps running the card pretty hot - hitting 75 deg. C when one OpenGL game is running. The fan barely goes over 60% speed - I'd rather have it run at 80% constantly to keep the temps under control.
There are drivers on nvidia website which "seem" to be a lot newer : 256.35 (using 64bit Linux) - are those "direct replacement" for the 195.36 which Ubuntu installs by default?
I have a well ventilated case (1x120mm pulling air, 1x120mm pushing out, neat cabling, etc). I have found nvclock but no joy - even with -force it doesn't want to change fan speed.
View 3 Replies
View Related
Sep 11, 2011
I installed the stable version of Debian last night (Debian GNU/Linux 6.0 l) and whenever I come out of suspend, the video card's fan stays at full speed. When I do a regular reboot, this doesn't happen.
Normal behavior is for the fans (cpu and gpu) to go to full speed for a few seconds and then settle on a slower (quieter) speed.
The hardware involved is:
Dell Vostro 400
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2)
The install is vanilla (as in "I haven't messed with drivers or configuration files - yet"). Also, keep in mind that I'm a newby - I've just switched to Debian after about two months of Ubuntu and am not too familiar with where everything is or what commands I need to do what, so instead of telling me to change the sync parameters in the nvidia configuration, I need to know exactly what parameter in exactly what file.
View 1 Replies
View Related
May 28, 2010
I just performed a clean install of Kubuntu Lucid earlier this week after deciding it was time to upgrade from Hardy. Pretty much everything worked, until I attempted to install the proprietary NVIDIA driver.
OS details: Kubuntu 10.04 x64 Kernel 2.6.32.22.What happened when I tried to install the proprietary nvidia-current package was simply that it didn't work. I could open the nvidia utility, it would say the driver was not in use. Attempts to force the issue by running nvidia-xconfig would render the X server unable to start, which gave me some quality time in a shell console with APT or restoring the xorg.conf file from backup. Trying to compile and install the driver from nvidia also wasn't working out so well.
I think the issue boiled-down to the install presumably attempting to upgrade the kernel during initial install from CD, but not doing so completely. I had all the appropriate 2.6.32.22 kernel and header packages, but GRUB was apparently still booting to the 2.6.32.21 kernel (which had no headers or anything) and not giving options to boot to the upgraded kernel.
How I fixed this was to remove all packages related to the 2.6.32.22 kernel via APT, then remove all the 2.6.32.21 kernel packages. That second operation triggered the 2.6.32.22 kernel to be reinstalled, and GRUB to be configured correctly to boot to it. At that point, I reinstalled nvidia-current, and it worked. I tried this after determining I was on the 2.6.32.21 kernel, and had no option to boot to the 2.6.32.22 one.
Your mileage may vary. In retrospect, I probably could've fixed it by fixing GRUB to boot to the current kernel. This appears to be a consistent issue, as I reinstalled at one point, just to start over, and went through the same thing again.
I suspect the driver I obtained from the nvidia website and patched (due to issues it has with recent kernels) might work now that I'm booting to the correct kernel with headers, but I think I'll save that for another time since nvidia-current is working great for me at the moment.
View 4 Replies
View Related
Mar 25, 2011
Sound should be easy. Far more easy than video, but i experience more problems with sound, than with my Nvidia GFX-card.It seems OpenSUSE use several type of sound-systems like Alsa-sound, Pulseaudio and OSS. Then its somthing called Xine and GStream that i've never heard about.I have OpenSUSE 11.3 64bits with KDE4.6.1What should i use and what can i uninstall?Now it seems i'm using PulsAudio with Xine-backend.
View 3 Replies
View Related
Dec 19, 2008
I recently reinstalled Debian on my desktop to migrate to 64-bit. Everything was working swimmingly before but I've encountered a bizarre error i have never seen before. After installing the Nvidia driver and rebooting when X comes up it complains it cant find any screens. However, if I kill X and start it again it starts with no issues. I also have an odd message at startup which might be part of the problem as well.I'm running Debian Testing AMD64 with and Nvidia 9800 GTX+. I compiled 2.6.27.8 for the install.
For what its worth the Nvidia module is showing up for lsmod so I don't really know what is wrong. I have tried reinstalling the nvidia driver as well which didn't help. The error message during bootup is:
Code:
Loading kernel modules...Usage: modprobe[-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] [ --dump-modversions ] <modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
[code]....
View 5 Replies
View Related
Feb 26, 2011
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
View 1 Replies
View Related
May 28, 2011
I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
View 9 Replies
View Related
Mar 9, 2011
I installed the Nvidia driver for the on board GeForce 7025 / nForce 630a the "Debian way", according to this link Debian Nvidia Howto. The problem is that the only available screen resolutions are 640x480 & 320x240 and I need something more like 1024x768. The driver is installed correctly, or at least is properly recognized, as in Nvidia Xserver settings, GPU0 appears as GeForce 7025 / nForce 630a.
Here's the xorg.conf file.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
[code]....
..only causes gdm not to start.On my Ubuntu partition, I have working the proprietary Nvidia driver (file: NVIDIA-Linux-x86_64-260.19.36.run), and have had no problems from it at all. I was going to install this same driver onto Debian when I read several pages advising to go the "Debian way".
View 4 Replies
View Related
Jun 25, 2011
When I had UBUNTU 10.04 sound WORKED!I have post several threads about this issue, I hope this would be the last one, My OS version is Ubuntu 11.04, my hardware is: Nvidia GTS 450 video Card EGS; and an integrated sound card reference: Via Azalia HDAC VT1708/A; After installing ubuntu I had no audio through my integrated sound card, I cant use my NVidia HDA card because I need for it an HDMI AUDIO, and I dont have any HDMI sound devices like dvd or TV. So I need to use my integrated default Via soundcard. I Updated the OS, nothing changed. After typing aplay -l it showed this:
aplay -l
**** Lista de PLAYBACK dispositivos hardware ****
tarjeta 0: NVidia [HDA NVidia], dispositivo 3: HDMI 0 [HDMI 0]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
[code]....
View 1 Replies
View Related
Jul 10, 2011
Am using ACER Aspire 5745G which has switchable graphics. I recently installed Ubuntu 11.04 - the Natty Narwhal i updated everything after the installation. Now the issue is that when i go to NVIDIA X Server Settings, its giving me an error message:- " You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. " Error.jpg also tried searching in the forum but it was so confusing, as am Newbie i have no idea where to start.
View 2 Replies
View Related
May 4, 2010
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
View 12 Replies
View Related
Apr 1, 2014
I am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove):Â subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: Â xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
View 6 Replies
View Related
