Debian Hardware :: Install Ati Cat. Driver To RadeonHD In Squueze?
Apr 5, 2011
I'm trying to install the Ati Catalyst 11.3 driver on a HD5000 series radeon graphics card, but it's fails. I installed earlier this driver on Ubuntu, Mint and last time in OpenSuse, so it's can't be an impossible task. In all case, the direct installation of the .run file is not an option, because it never workd on any distors. My way is to generate the fglrx package, then install the .deb file. But in Squueze, it's gave me a problem, something is missing from /usr/X11R6 directory (basicly there is no such directory anyway)
I installed the dpkg-dev and debhelper packages to solve some problems during the buildpkg, but after that i get these:
sh ati-driver-installer-11-3-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.j35Qd7
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
View 14 Replies
ADVERTISEMENT
Dec 30, 2009
I have a AGP Radeon HD3650 RV635. I've tried using the ATI Catalyst 9.12 drivers, and they work ok with 2D/3D DECCELERATION. 3D works but it's extremely slow, maximizing a window takes 10secs, videos skip when played in fullscreen. Disabling Compiz doesn't help much, in 2D mode, windows redraw slowly.
I'm trying to install the open radeonhd drivers, and so far, it's booting into gnome, but it's barely usable. There is no 2D acceleration (log says ShadowFB only) and glxinfo reports:
Code:
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
[Code]...
View 4 Replies
View Related
May 19, 2010
I have Dell Inspiron 6400 equipped with an ATI Radeon Mobility X1400 card and running Ubuntu 10.4. Before the upgrade from 9.10 to 10.4 I was using the "generic" xserver-xorg-video-radeon, which was working fine but after the upgraded did NOT allow me to work in Dual Screen mode.
I then saw that there is a xserver-xorg-video-radeonhd driver which targets, among all, my X1400 card. I installed it and the Dual Screen now indeed works but I notice that my system is slower (actually, it stresses a lot the CPU) when I do things like scrolling a page in the browser, reducing/restoring a window, etc.. so I'm wondering if it isn't a driver or configuration issue in Xorg.
My xorg.conf (regeranted from scratch by the Xorg -configure):
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
[Code]...
View 6 Replies
View Related
Jun 17, 2009
I am trying to get video output with mplayer on a 64 bit hp laptop running the radeonhd driver. I feel in need of a little config magic. It throws up a square box in the middle of the 1200x800 screen. My config file simply says:
xy-3:2
utf8=yes
dec@harriet:$ mplayer dvd://2 - The video bit says
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 9800.0 kbps (1225.0 kbyte/s)
[code].....
mplayer -vf spp, scale also gets laughed at. There is also some conflict because the agp aperature is over 4 gigs and the bios/kernel recreate one at 2 gigs. This is a lousy video combination (ATI card under linux - 'nuff said).
View 4 Replies
View Related
Mar 13, 2010
Updated xorg-x11-driver-video-radeonhd few days ago,became so laggy,windows pop up & zoom very slow,it was snappy (I didn't install proprietary driver). My graphic card is integrated ATI Radeon HD3200.
View 5 Replies
View Related
Mar 23, 2011
after a upgrade via DVD (11.3 -> 11.4) which shows no errors, i can't start the Xserver. During Startup in Grub i have an graphical enviroment.
xorg.log says:
Code:
(EE) Failed to load /usr/lib64/xorg/modules/drivers/radeon_hd.so
(II) UnloadModule: "radeonhd"
(EE) Failed to load module "radeonhd" (loader failed, 7)
(EE) No drivers available
but the file /usr/lib64/xorg/modules/drivers/radeon_hd.so is there.
[Code]...
View 1 Replies
View Related
Oct 4, 2010
When I upgraded my 2004 Apple G5 PPC tower from 10.04 lucid to 10.10 server the ATI RadeonHD 2600 video drivers got bonked. I can only get the command line.
View 5 Replies
View Related
Jan 12, 2010
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
View 4 Replies
View Related
Mar 5, 2011
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies
View Related
Apr 20, 2010
I have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
View 1 Replies
View Related
May 22, 2010
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies
View Related
Apr 16, 2010
I have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.
View 4 Replies
View Related
Jun 2, 2011
I try to install the last evtouch-0.8.8.tar.gz driver from:
[URL]
on my squeeze an get this problem:# tar xvfz evtouch-0.8.8.tar.gz
# cd evtouch-0.8.8
# ./autogen.sh --prefix=/usr/lib/xorg
# make
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /tmp/evtouch-0.8.8/missing --run autoheader)
rm -f stamp-h1
[Code]....
View 3 Replies
View Related
Apr 8, 2010
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
View 14 Replies
View Related
Jun 21, 2011
I've got a Dell Optiplex Desktop here, the CPU is a Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. The integrated ethernet here is from intel also, it's a 82579LM Gigabit Network Connection. This computer is running a Debian Squeeze 64bits, distrib sid, kernel 2.6.39-2-amd64.Well, here goes the story. I had a lot of trouble with the ethernet card, being very slow, and it just didn't work when i was using tftp. So I downloaded and compiled the latest driver available on Intel website. Currently with debian sid, the version for the driver ( e1000e ) is version: 1.3.10-k2. From Intel I got the version 1.3.17-NAPI.Alright, so I build it, and move the module manually to the right place, replacing the previous version at the same time ie :
$ sudo cp e1000e.ko /lib/modules/2.6.39-2-amd64/kernel/drivers/net/e1000e/e1000e.ko
However, there is is still something bothering me. When I want to check, after rebooting, that I did it right, here is what happens :
$ sudo ethtool -i eth1
driver: e1000e
version: 1.3.10-k2
[code]...
So, which one should I trust ? Is there something I didn't do properly when installing the module ? Or maybe I just don't understand ethtool and modinfo enough.
View 5 Replies
View Related
May 13, 2011
I am trying to install an Asus USB-N13 USB Wireless Networking stick on an Intel-chip laptop loaded with Debian squeeze release. I have built a driver (rt3070sta.ko) and the "insmod rt3070sta.ko" seems to have worked fine. I can see the driver with "ifconfig ra0" and I can set an ip address with "ifconfig ra0 inet...".HOWEVER: 1: The gnome network manager doesn't see any wireless networks to connect to.2: If I try "ifconfig ra0 up" I get "SIOCSIFFLAGS: Operation not permitted"I am doing this from a root window and my login has root privileges. I'm missing a last step - what is it?
View 2 Replies
View Related
Jun 12, 2010
Since I can't get a screen size anywhere above 1280x800 on the "radeon" driver and the experimental mesa dri drivers - which I installed (7.8.1.6) have now disabled 3D on all ATI drivers(!) I'm scratching my head furiously trying to see if I can get 3D to work. I've taken a look at the X.Org experimental HOWTO but it says if I have everything I need I don't need to follow the steps and download from git. [URL]. If you have reasonably up to date radeonhd (1.3.0 or higher), kernel (2.6.32 or higher) and mesa (7.7 or higher)you shouldn't need to follow *any* of the instructions on this page. These obviously come with F13 by default.
Glxinfo output is right here, I'll post xorg.conf if anyone needs it:
bash-4.1$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_MESA_copy_sub_buffer, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI .....
View 1 Replies
View Related
Nov 11, 2014
I've been in a difficult situation since we're having only wifi and there is no way to connect my laptop to the internet via a LAN cable.
Debian's packages don't support my wireless card. However this one works: [URL]
Is there any way to install this driver for the Installer to connect to the internet while installing?
I don't know what exactly to do when the Installer ask for my network driver so that I can use it.
View 3 Replies
View Related
Sep 19, 2015
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies
View Related
Apr 26, 2011
I am trying to install LIRC version 0.9.0 on Debian Squeeze When I execute
# ./configure --with-driver=mceusb
The configuration starts, but it stuck on the follow message:
configure: error: *** it is not possible to install the specified driver
current kernel version is:2.6.38.4
View 3 Replies
View Related
May 18, 2010
Where is kernel directory. i want it to install a skystar 2 driver.
View 2 Replies
View Related
Jan 11, 2011
First time user who has just picked up a nice old Sony netbook to give Debian a try on. Only problem is, this little thing doesn't come with any form of Ethernet card or port, and has to rely on a USB D-link DWA 140 B1 Rev Dongle. This device identifies itself as the Type RT2870 device and when i do "lsusb", it comes out as RALink RT2870. Running the CD install of Lenny, Kernel 2.6.26-2-686, and I can't for the life of me figure out how to get this damn Wireless card working.
The Wiki tells me to look into Upping the kernel to 2.6.32, which unfortunately requires some form of internet access for the backports Also consulted and tried (unsuccessfully, the make command would not run properly) this guy's advice: [URL].... Do any of you kind people have any advice or things for me to try to finally figure out how to get this little laptop online?
View 3 Replies
View Related
Apr 22, 2010
I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:
# mkdir hybrid_wl
# cd hybrid_wl
# tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz
The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.
View 14 Replies
View Related
Jul 18, 2010
I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 Replies
View Related
Feb 23, 2011
I'm attempting to get a Realtek 0bda:8176 wireless usb adapter (lsusb gives: Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp.) running with my Debian Server, I researched and found that the RTL8192CE driver is required for my adapter but when I run make install I get this error:
[Code]....
View 2 Replies
View Related
Jul 3, 2014
But let'start from the scratch.The wireless card interface in my laptop is one belonging to the "infamous", not Linux-friendly broadcom family.it is the BCM4312 802.11b/g LP-PHY (PCI-ID 14E4:4315). I downloaded the .iso image file of Wheezy 7.5 from the official repositories, put it on a USB key, and started the installation process with no internet connection. But during the installation, the installer informed me that some firmware was missing, i.e. ucode.fw and ucode15.fw.
Anyway, I went along and finished the installation. Of course, running Wheezy, I could not connect my laptop to my wireless modem just because of this problem, and so I needed a solution to install the right driver(s) but without a connection in my laptop! After long googling, finally I have found the solution [URL] ...., that is using the b43-fwcutter to extract the firmware from the Broadcom's proprietary driver. I simply report here the procedure to be followed, in a clear way:
By means of another PC with an internet connection, download the b43-fwcutter (version 018) from here: URL...Copy this file in the PC where you want the driver to be installed.Extract the b43-fwcutter tarball in a folder (tar xjf b43-fwcutter-018.tar.bz2, if you use the terminal), and then:
cd b43-fwcutter-018
make
su
(password)
make install
Now, after installing b43-fwcutter, download version 5.100.138 of Broadcom's proprietary driver from here: URL...Copy this file in the PC where you want the driver to be installed.Extract this tarball in a folder (the same as previous or another one): tar xjf broadcom-wl-5.100.138.tar.bz2 and finally extract the firmware from it:
su
(password)
b43-fwcutter -w /lib/firmware broadcom-wl-5.100.138/linux/wl_apsta.o.
The standard place in Wheezy 7.5 where firmware is installed to is /lib/firmware. In another distribution this could be different.
View 14 Replies
View Related
Jul 5, 2010
I'm new to debian and have just installed release 500(lenny?) on this netbook. The onboard atheros wlan was neither detected nor its driver installed. I was thinking maybe NET-installalling the 'test' version in hopes that that will do it. Will a net-install work (driver already in installer)?
View 3 Replies
View Related
Jun 23, 2011
How to install Nvidia 9500 GT with nvidia driver.
View 5 Replies
View Related
Jul 30, 2011
I was trying to install this driver of ATI Radeon HD 6370M but i can't do that it works. I googled and visited a lot of pages and I think that I saw a post on this forum talking about a problem like mine. I follow this guide too: [URL] I only want the driver to run gnome3.
/usr/share/ati/fglrx-install.log
Creating symlink /var/lib/dkms/fglrx/8.872/source ->
/usr/src/fglrx-8.872
DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping...
[Code]....
View 2 Replies
View Related
Apr 2, 2010
I'm newb to Debian OS. I have ASUS X51RL laptop. I'm not able to install driver for my wireless internet that's called Atheros Communications Inc. AR242X 802.11abg Wireless PCI Express Adapter.
View 8 Replies
View Related
