OpenSUSE Hardware :: No 2d Acceleration On Radeonhd Driver?
Dec 30, 2009
I have a AGP Radeon HD3650 RV635. I've tried using the ATI Catalyst 9.12 drivers, and they work ok with 2D/3D DECCELERATION. 3D works but it's extremely slow, maximizing a window takes 10secs, videos skip when played in fullscreen. Disabling Compiz doesn't help much, in 2D mode, windows redraw slowly.
I'm trying to install the open radeonhd drivers, and so far, it's booting into gnome, but it's barely usable. There is no 2D acceleration (log says ShadowFB only) and glxinfo reports:
Code:
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
[Code]...
View 4 Replies
ADVERTISEMENT
Mar 13, 2010
Updated xorg-x11-driver-video-radeonhd few days ago,became so laggy,windows pop up & zoom very slow,it was snappy (I didn't install proprietary driver). My graphic card is integrated ATI Radeon HD3200.
View 5 Replies
View Related
Mar 17, 2011
I installed Suse 11.4 and have a couple of questions.
I installed the newest Nvidea driver for linux but when I look under system info it sais 3D driver: swrast (No 3D Acceleration) (7.10)) How can I turn this on?
Also under CPU info the speed switches between 800MHz, 1400MHz and the normal 2.6Ghz (x4 for the Quad Core). Is something wrong or does it shows how much the system is using current?
Lastly my pc shows the following:
OS: Linux 2.6.37.1-1.2-desktop x86_64, Current user: robertjan@linux-18xg, System: openSUSE 11.4 (x86_64), KDE: 4.6.00 (4.6.0) "release 6"
Since I see x86_64 how do I know if I installed the x64 version which I downloaded?
View 6 Replies
View Related
Jul 26, 2011
I'm using openSuse 11.3 with KDE 4.4.4. My graphics card is an Asus EAH 5450 with an ATI radeon HD 5450 GPU. I'm using the opensource radeon driver. When I open sysinfo:/ in Konqueror, I see the following info:
Vendor: ATI Technologies Inc
Model:
2D driver: radeon
3D driver: swrast (No 3D Acceleration) (7.8.2))
How do I switch on 3d acceleration without installing the proprietary driver from ATI/AMD? I know this must be possible because on another computer, I have also openSuse 11.3 with KDE 4.4.4 and an ATI radeon HD 4350 installed and it has 3d enabled directly after installation of openSuse with the opensource radeon driver.
View 5 Replies
View Related
Apr 5, 2011
I'm trying to install the Ati Catalyst 11.3 driver on a HD5000 series radeon graphics card, but it's fails. I installed earlier this driver on Ubuntu, Mint and last time in OpenSuse, so it's can't be an impossible task. In all case, the direct installation of the .run file is not an option, because it never workd on any distors. My way is to generate the fglrx package, then install the .deb file. But in Squueze, it's gave me a problem, something is missing from /usr/X11R6 directory (basicly there is no such directory anyway)
I installed the dpkg-dev and debhelper packages to solve some problems during the buildpkg, but after that i get these:
sh ati-driver-installer-11-3-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.j35Qd7
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
View 14 Replies
View Related
May 19, 2010
I have Dell Inspiron 6400 equipped with an ATI Radeon Mobility X1400 card and running Ubuntu 10.4. Before the upgrade from 9.10 to 10.4 I was using the "generic" xserver-xorg-video-radeon, which was working fine but after the upgraded did NOT allow me to work in Dual Screen mode.
I then saw that there is a xserver-xorg-video-radeonhd driver which targets, among all, my X1400 card. I installed it and the Dual Screen now indeed works but I notice that my system is slower (actually, it stresses a lot the CPU) when I do things like scrolling a page in the browser, reducing/restoring a window, etc.. so I'm wondering if it isn't a driver or configuration issue in Xorg.
My xorg.conf (regeranted from scratch by the Xorg -configure):
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
[Code]...
View 6 Replies
View Related
Jun 17, 2009
I am trying to get video output with mplayer on a 64 bit hp laptop running the radeonhd driver. I feel in need of a little config magic. It throws up a square box in the middle of the 1200x800 screen. My config file simply says:
xy-3:2
utf8=yes
dec@harriet:$ mplayer dvd://2 - The video bit says
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 9800.0 kbps (1225.0 kbyte/s)
[code].....
mplayer -vf spp, scale also gets laughed at. There is also some conflict because the agp aperature is over 4 gigs and the bios/kernel recreate one at 2 gigs. This is a lousy video combination (ATI card under linux - 'nuff said).
View 4 Replies
View Related
Sep 4, 2009
I have an intergrated Intel GMA 3100 gc and i have no idea where to get a driver for 3d or 2d with acceleration.
View 10 Replies
View Related
Jan 4, 2011
I am using RHEL 6.0 OS runnig on an i5 core with H57 chipset. whether there is any support for GMA-HD in the builtin graphics drivers or do I need to add any extra driver for using GMA -HD?
View 1 Replies
View Related
Nov 22, 2010
I have a problem with my two new screens. Second screen is now clone of the first one and I can't get them to a one "wide" desktop. (you know what I mean?) When I go to Configure Desktop -> Display, I have two DFP's: DFP1 and DFP2. When I change position of DFT2 from "clone" -> "right of" , my second screen goes black.. I have tried to use Sax2 to configure but when I test "side to side" mode screens and keyboard stops working and I need to reboot. how I can get it to work?
OS Information
OS: Linux 2.6.31.14-0.4-desktop x86_64
System: openSUSE 11.2 (x86_64)
KDE: 4.3.5 (KDE 4.3.5) "release 0"
[Code]...
I tried to search around forum but I didn't find anything (or I didn't just understand) So a step by step quide would be helpful for noobie like me
View 2 Replies
View Related
Mar 23, 2011
after a upgrade via DVD (11.3 -> 11.4) which shows no errors, i can't start the Xserver. During Startup in Grub i have an graphical enviroment.
xorg.log says:
Code:
(EE) Failed to load /usr/lib64/xorg/modules/drivers/radeon_hd.so
(II) UnloadModule: "radeonhd"
(EE) Failed to load module "radeonhd" (loader failed, 7)
(EE) No drivers available
but the file /usr/lib64/xorg/modules/drivers/radeon_hd.so is there.
[Code]...
View 1 Replies
View Related
Jun 20, 2010
I have a nvidia Geforce 8500 on my 10.04 system - the driver I'm using is: NVIDIA accelerated graphics driver (version current) [Recommended]. When I look at System/Preferences/Monitors I am asked if I want to use the vendor's graphics tool and up pops the NVIDIA X Server Settings window. How do I enable 3D acceleration?
View 2 Replies
View Related
Jan 11, 2011
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
View 1 Replies
View Related
Mar 31, 2010
where can i find information about where i can volunteer help on the radeonhd project ? ive cgecked the radeonhd web site and find no links for contact
View 1 Replies
View Related
Aug 23, 2010
My problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.
View 6 Replies
View Related
Nov 14, 2010
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
View 5 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line). I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 1 Replies
View Related
Sep 10, 2011
I can't enable 3d acceleration because when I enable the Desktop effects, and I exit the window, they are not active.. I enter in the desktop effects configuration again, and I can see that the option "enable" is uncheck.. I'm a newbie.. Can you explain me how do I get the driver for my Nvidia GeForce 9600M GT (512 MB of Graphic RAM)? Do I have enough power to run 3d?
View 5 Replies
View Related
Mar 12, 2011
I was really looking forward to Firefox 4, especially to trying the hardware acceleration. I'm using nvidia proprietary driver which is the combination which *should* work, according what I've read. However it doesn't. Firefox doesn't even recognize my graphics card, when I type about:support, there is no information about my graphics. So I wonder, is there anyone who got this working?
View 9 Replies
View Related
May 1, 2010
On windows xp when i right-click on the flash video, i can choose 'enable hardware acceleration', but when i do the same for OpenSuse i don't have any hardware acceleration option.
How can i have a GPU/hardware acceleration option for flash?
View 6 Replies
View Related
Apr 10, 2011
I get the following error when trying to enable Hardware Acceleration in VLC:
Code:
VLC media player 1.1.7 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
m_el[mi_level] == NULL
[Code]...
View 2 Replies
View Related
May 13, 2011
I've never got if, after enabling the 3d acceleration in virtualbox and installing the guest additions in safe mode, you still need to install the original drivers (catalyst in my case). Do know that by chance?
View 1 Replies
View Related
Mar 4, 2010
opensuse v11.2, linux 2.6.31.12-0.1-desktop x86_64
ati radeon hd3200 (built into motherboard)
gnome desktop
The video acceleration is clearly not enabled since I can practically watch each pixel drawn. (Well, a bit hyperbolic, but really slow.) Another system, same hardware, had this slow video problem and at one point required a complete OS re-installation. The slow video refresh went away. So there is some way to configure the graphics+display to enable acceleration at install time.
View 4 Replies
View Related
Aug 29, 2011
anyone seeing Firefox (version 6 and 7)screen corruption using the ATI binary blob with hardware acceleration enabled ? N.B Works fine when hardware acceleration is disabled.
View 4 Replies
View Related
Jun 12, 2010
Since I can't get a screen size anywhere above 1280x800 on the "radeon" driver and the experimental mesa dri drivers - which I installed (7.8.1.6) have now disabled 3D on all ATI drivers(!) I'm scratching my head furiously trying to see if I can get 3D to work. I've taken a look at the X.Org experimental HOWTO but it says if I have everything I need I don't need to follow the steps and download from git. [URL]. If you have reasonably up to date radeonhd (1.3.0 or higher), kernel (2.6.32 or higher) and mesa (7.7 or higher)you shouldn't need to follow *any* of the instructions on this page. These obviously come with F13 by default.
Glxinfo output is right here, I'll post xorg.conf if anyone needs it:
bash-4.1$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_MESA_copy_sub_buffer, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI .....
View 1 Replies
View Related
Oct 4, 2010
When I upgraded my 2004 Apple G5 PPC tower from 10.04 lucid to 10.10 server the ATI RadeonHD 2600 video drivers got bonked. I can only get the command line.
View 5 Replies
View Related
May 3, 2010
After resuming from suspend (press power button), display is correct except cursor is not displayed. Mouse responds and I am able to highlight widgets etc. on display and X responds to mouse-clicks correctly.Confirmed it was definitely Xorg-related (radeonhd):Logged out of GNOME then logged back in using 'xterm' desktop.ran pm-suspend(8).pressed power button and cursor was not displayed.Currently using the setting where I use the ctrl key to show the cursor position.
2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux
[STOP PRESS!!] While I was clicking around, typing this forum post, the cursor has suddenly appeared, about 19 minutes after 'resume' completed.
View 9 Replies
View Related
Jul 10, 2009
I just put Fedora 11 on my Lenovo Thinkpad t400. I selected the integrated (lousy, but Intel (supported)) graphics device in the BIOS, but I really hate the lower performance than the discrete graphics device. However, this device requires fglrx or radeonhd for DRI. RPMFusion has not released an (a)kmod-fglrx, so I can't use that. I have heard radeonhd has some stability issues though, and I don't know how to install. I was wondering how I could completely change my graphics configuration (change chipsets in the BIOS) and get the X Server in Fedora 11 working with the new driver and chipset. Is it a good idea to use radeonhd, or should I wait for the fglrx?
Even then, how would I completely change my graphics configuration so it would work with a different card & driver? I don't want to do a fresh install because I've done a lot of work & customization with the F11.I don't know anything about radeonhd, so any information about this kind of thing would be useful.Finally, should I just suck it up and deal with the Intel graphics? Is anything of this sort really worth my time? (I'm willing to spend quite a bit, trust me!)
View 3 Replies
View Related
Jan 12, 2010
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
View 4 Replies
View Related
Mar 15, 2010
I have a Dell 1737 laptop with ATI Mobility Radeon HD 3650. I have the ATI fglrx drivers installed.
All OK.... BUT
I have no hardware graphics acceleration to any application.
glxgears consumes 29% of the CPU to run.desktop compositing consumes 0-50% CPU depending on activity.
running opensuse 11.2 up to date...
View 9 Replies
View Related
