I'm new to debian and have just installed release 500(lenny?) on this netbook. The onboard atheros wlan was neither detected nor its driver installed. I was thinking maybe NET-installalling the 'test' version in hopes that that will do it. Will a net-install work (driver already in installer)?
View 3 Replies
I got fed up with trying to install from an nvidia binary, so I decided to move my entire computer to connect it to the net temporarily. However, just to torment me further, hardware drivers won't work due to a seemingly irrelevant 404.
View 4 Replies View RelatedSo i want to install AMD drivers from the website. I know.. I know.. Its the same old story but I play games and such so i need them...
So I'm using the --buildpkg switch and have tried every Debian/stable, Debian/unstable, Debian/testing etc.. none of them work. I get en error stating a folder is not found.
How do I build packages specific to Debian. in the --listpkg it says Debian is supported but i cannot get the %**^ %#@@$ ATI drivers ever to work right.
I downloaded the debian-live-6.0.1-amd64-kde-desktop.iso. Found here [URL] and made a bootable usb drive. After KDE starts there is the Debian Installer icon on the desktop and usually it will work, but not for me. I click the icon and wait for it to start but nothing happens?
View 4 Replies View RelatedI'm trying to install an ati video card driver, but can't seem to get past this (see screenie)
When I click okay, I expected a prompt to put in my password, but everything just closes.
I'd like to do a fresh install of newly released Jessie with only Xfce in a graphical installer. When I come to the point where i have to select the DE to install, there are options: Debian desktop environment, and then ...GNOME, ...Xfce, ...Lxde etc.
I guess that with the first option, it's like in Wheezy - it installs the default, which is gnome. But if i choose the ...xfce option, do i have to keep the 'debian desktop environment' option checked, or will that just install gnome alongside Xfce? Do i have to check only Xfce as an option?
I'm trying to install Debian 8.1 LXDE 64bit on a Toshiba Chromebook cb30 from usb. When I select 'install' the laptop restarts and gets me back to the installer menu. I removed 'quiet' from the boot options and it seems that the reboot happens after initrd.gz is read. I previously installed the 32bit version on the chromebook and the installation process worked pretty much without any issues. I might have added 'mem=1024m' to the boot options, though even if I did, this doesn't do anything to my current attempt.
The chromebook processor according to `uname -a` is x86_64 Intel Celeron 2955U. how I could install the image or start debugging the issue?
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View RelatedI've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
View 6 Replies View RelatedI've started playing around with debian 6 stable, and was just wondering if its worth it to go to the trouble of removing nouveau, or if it will handle everything well enough. I use my laptop for a little bit of gaming (older games) under wine, all the basic email/web browsing/writing stuff, some photo editing under gimp, movies/music, and a very little bit of Blender work.Will Nouveau handle all this well enough, or should I use the proprietary nvidia driver?
View 6 Replies View Relatedi've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies View RelatedEverything was working fine on Deb 7.7 with propriety driver. Then I did what I "presumed" to be an "update" through apper but it upgraded to Deb 8. The upgrade borked half way through with errors (cannot remember what they were, unfortunately I had to go out - wasn't expecting an upgrade or I'd have done it with more time).
Apper stated it had part installed stuff and trying to run update again (through apper) then had "no permissions" issues even though I entered password. After a few reboots and upgrading through recovery I "seem" to have resolved that, but might be related to this issue.
After resolving that issue I booted up and the grey GUI login screen was fine, after entering password the next screen was a colourful splash screen (with "Desktop" tab in top right corner), but it doesn't advance from that screen. No mouse, can't click or tab. Ctrl Alt Del does nothing.
The image looked like this, but with only "Desktop" in a black tab at the top right.
[URL] ....
I've never seen this screen before.
After followed this guide using recovery boot:
[URL] ....
Code: Select allapt-get purge "fglrx.*"
rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core libgl1-mesa-glx:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:amd64
sudo dpkg-reconfigure xserver-xorg
My system booted fine, albeit low resolution etc.
So I tried to install proprietary again using this Debian how to: [URL] ....
Although the procedure looks the same for Deb7 as it does Deb8 (barring the source).
The same problem happened where I was stuck at the loading/splash screen after GUI login.
So I removed the proprietary drivers again and am now back in, again albeit low res like am back in he 90's. Also, that splash screen doesn't show at all now.
The driver is supposed to be fine with my setup, so is there some issue left over from the borked upgrade perhaps? Everything seems fine otherwise.
how can i remove this driver ati-driver-installer-11-5-x86.x86_64.run from fedora 15 ? I cant seem to find the un-installer any where..
View 4 Replies View RelatedI would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.
View 2 Replies View RelatedI've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
I cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
View 2 Replies View RelatedI have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
View 1 Replies View RelatedThis is my first post and I'm pretty new on Debian. I had used Ubunu for a while now and I've decided to move on Debian Squeeze.But I've one problem: I've a Java programm to install and the installer is GUI Java based. When I run the script, I've the next message:
Preparing to install. Extracting the JRE from the installer archive.Unpacking the JRE.Extracting the installation resources from the installer archive.Configuring the installer for this system's environment.Launching installer Graphical installers are not supported by the VM. The console mode will be used instead. Preparing CONSOLE Mode Installation. But this program is not able to run the installation in console mode.
I've tried to install sun-java6-jre but without success.Has anyone an idea to help me install this programm? My Configuration: Debian Squeeze 6.0 amd64.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedNo wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
im a new to Fedora and I think im gonna find it very "Professional". first off I need to get this thing installed.
Problem 1= no CD
Problem 2= no USB drive
Problem 3= USB modem so cannot install over internet.
Well I did some research then and found out EasyBCD 2.0 support booting from .iso files.Tought thats gonna be good idea to give a try but it just doesnt work I keep getting "grub>" or something like that.Another useful tool I found was "Unetbootin" which I saw can be boot from Hard Drive too.With this I get some blue screen loading some white thing and then "bang" error appears that "Sleeping forever". I guess its related that I boot off from HDD.If anyone have any good ideas how should I get it working or manually boot kernel in that "grub>" part ( which I tried but said file not found)
I tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies View RelatedJust bought a new Mac Mini, no optical drive. Using a USB drive, I can get to the EFI grub menu, and boot to the installer menu, but from there the keyboard (USB) doesn't work at all. I've tried every combination of boot flag and am at my wits end. Booting using BIOS results in a "Boot error" message, no grub.Update:Using the 11.04 amd64 iso, I have a slightly different problem. Eventually after grub, I get kicked to a minimal shell (dropbear maybe?) with the complaint "unable to find a live medium." However, from other searches, this may be an issue with a corrupt USB disk, and not a problem with the Mac/EFI boot process.
View 1 Replies View RelatedI have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.
View 4 Replies View RelatedI try to install the last evtouch-0.8.8.tar.gz driver from:
[URL]
on my squeeze an get this problem:# tar xvfz evtouch-0.8.8.tar.gz
# cd evtouch-0.8.8
# ./autogen.sh --prefix=/usr/lib/xorg
# make
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /tmp/evtouch-0.8.8/missing --run autoheader)
rm -f stamp-h1
[Code]....
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
I've got a Dell Optiplex Desktop here, the CPU is a Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. The integrated ethernet here is from intel also, it's a 82579LM Gigabit Network Connection. This computer is running a Debian Squeeze 64bits, distrib sid, kernel 2.6.39-2-amd64.Well, here goes the story. I had a lot of trouble with the ethernet card, being very slow, and it just didn't work when i was using tftp. So I downloaded and compiled the latest driver available on Intel website. Currently with debian sid, the version for the driver ( e1000e ) is version: 1.3.10-k2. From Intel I got the version 1.3.17-NAPI.Alright, so I build it, and move the module manually to the right place, replacing the previous version at the same time ie :
$ sudo cp e1000e.ko /lib/modules/2.6.39-2-amd64/kernel/drivers/net/e1000e/e1000e.ko
However, there is is still something bothering me. When I want to check, after rebooting, that I did it right, here is what happens :
$ sudo ethtool -i eth1
driver: e1000e
version: 1.3.10-k2
[code]...
So, which one should I trust ? Is there something I didn't do properly when installing the module ? Or maybe I just don't understand ethtool and modinfo enough.
