I bought before some days a laptop (aspire 5541) These are the specs:
amd athlon II x2 M300 2GHz 1MB L2 Cache
ATI mobility radeon hd 4200 with 1408 mb hyper memory
3GB ram ddr2 500gb disk
I installed debian squeeze (i386 ) everything now is working correctly with some work....but the sound card not ... i have no idea what card i have. i did this command : lspci but nothing...
I just installed Fedora 14 on an Acer Aspire 4930 Laptop. Everything works well, but i have to sound.
View 1 Replies View RelatedI have already installed my sound card.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
Followed through this:
sudo gedit /etc/modprobe.d/alsa-base.conf
And added
options snd-hda-intel model=auto position_fix=0
After all of this, the built-in mic still doesn't work. I'm using a Aspire One 532h-2588 laptop. I need to get this working so I can use VOIP. I'm using ZoIper.
When I plug in some external speakers in the headphone jack, the sound disappears. If I unplug them I can hear the sound again. Does anyone know how to workaround this problem?
I got two sound options:
1. The HDMI digital sound output of my ATI Mobility Radeon HD 5650
2. Analog sound output
I am using the analog sound in duplex mode (one stereo input one stereo output A quick solution would be great The sound of the internal speakers is really horrible xD
I am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
View 6 Replies View RelatedI have an Aspire One ZG5, Stretch/Sid, fully updated.In modprobe.d I have acerhdf.conf with:
Code: Select alloptions acerhdf kernelmode=1 interval=10 fanon=65000 fanoff=60000
When the temp reaches 65c the fan comes on, but never shuts off. The fan does cool the cpu.If remove the module, and then modprobe it, the fan stops until the cpu reaches 65c.how to get the fan to shut off properly?
I'm new on this forum, but not new on linux and in general on Ubuntu and Debian and I've always programmed on these OS but I still have a long way, however, in fact I have a new Aspire E15 573G in which there is the UEFI that creates many problem on the boot of different systems but I need to change Windows 10 to Debian or to have both them because I hated Windows.
I searched in many sites to find because my debian live charged on my usb pen doesn't boot in any manner, I read that the live debian still does not start on UEFI systems but I still BELIEVE that there is a method to boot it up and I found this: [URL].....
So my request to you for now is what are the boot parameters to set to the liveboot.nsh? because that configuration doesn't solve the problem, Debian wanted ACPI disabled so I modified the .nsh but still there's the black screen.
I've recently acquired a little 10" netbook (Acer Aspire One D255) and am running Debian squeeze on it. It runs great except for the internal SD card reader, which doesn't do anything. If I have a USB card reader handy then it works fine, but it would be nice to have the internal card reader working if possible.
/var/log/messages says this:usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-5: Product: UB6250
usb 1-5: Manufacturer: ENE FlashBut no device is created and nothing can be mounted.
Doing a little searching reveals many similar complaints from last year, without particularly satisfactory solutions, but I can't find anything more recent. Does anyone know if there's a Debian fix for this yet? By which I mean a simple fix involving adding a module package or maybe upgrading to a wheezy kernel or something like that?
I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.
Don't know if it helps however when I tpye iwconfig I get:
ladb:/home/nigel# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
View 12 Replies View RelatedAfter upgrading to Kernel 3.1.16-0-4 my Acer Aspire ES1-311 freezes during startup. I can still enter the recovery mode maintainer shell (sometimes), but sometimes it also freezes after giving me the root shell prompt.
View 12 Replies View RelatedI tried to create an xorg.conf because I didn't have one already. I put the configuration for the synaptics touchpad in it and in the gnome preferences/mouse my touchpad actually was recognized by its name. But still it didn't work :/ I tried deleting my xorg.conf and making a xorg.conf.d directory with synaptics.conf because I saw someone recommend it in another thread. But now the gnome/mouse settings doesn't see it and it still doesn't work. I've read several threads from Arch Linux's forums saying it may be that the module is loaded twice, but I really have no idea.
Here's the /proc/bus/input/devices:
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
[code].....
I have an Acer Aspire 5102 notebook computer with the infamous Broadcom 4318 chipset. In the past I have had to install FW cutter & proprietary drivers to get this chipset to work with Ubuntu. With the release of Ubuntu 10.10 Marverick Meercat I seem to remember the WiFi working immediately after installation; although I could be mistaken.
Will I have to go through similar gymnastics to get Debian to work on my system; or do you think it will work right away?
Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.
View 4 Replies View RelatedRunning Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedI can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
I made a recent update to my Squeeze system and got this weird problem. mplayer, VLC and firefox (.....) all have sound. But when I try to run Amarok I get nothing. I looked into the Multimedia panel on the KDE4 system settings, and its not showing any devices at all. Previously it used to show HDA Intel etc., etc. Now the entries are completely blank. How do I get KDE to recognize my hardware? Shouldnt it pick things up automatically?
View 3 Replies View RelatedI'm relatively new to debian, but an intermediate linux user. I've just installed wheezy and I'm having trouble setting sound up. When plugging my headphones in via the motherboard, sound works fine. Great. I plugged in my USB Sound Card (Audiobox 44VSL) and no dice. It's set as card 1 under aplay -l, yet no sound. I know this box works on GNU/Linux because I used to use it in Xubuntu a couple years ago with no problems at all.
View 2 Replies View RelatedI'm using HP Compaq presario CQ42 laptop n its speaker is ALTEC.I use debian 6 64bit edition.I didn't get sound through the speaker but got sound through the headphone.I fact it also happen at ubuntu 10.04LTS but when I use Linux mint 10 it got sound!!I already update my alsa at debian but still don't getting the sound through the speaker but getting sound through the headphone.
View 3 Replies View RelatedYou can move this to the Debian subforum if you see fit, but here's my problem. (I'm running Debian Lenny, 5.0.5)Aside from the microphone, webcam and speakers not working (which I would also like to have recognized at some point; at least the speakers, anyway)
Through someone helping me grep and lpsci, I have determined that the eth0 is Broadcom Device 1692 and the WiFi card is Broadcom Device 4537.I have tried to get thru installing NdisWrapper but always run into the same problem. I'm able to run this line
Code:
aptitude install module-assistant wireless-tools fine without any problems (do I need to download anything and put it on the PC I've got Debian running on?).. but as soon as I get to the next section, the terminal freezes up and gives me a diagnostic:
Code:
Installation of the ndiswrapper-source source failed. Ignoring this package. Maybe you need to add something to sources.list, maybe the contrib and non-free archives.So, how do I go about installing the right drivers and getting ndiswrapper set up?
This version of the kernel I've installed the sound card does not, but there is a solution?
View 1 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
Debian 5.0 32 bit
Gnome
No sound on login. How to fix it?
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI have loaded Debian 5.0.3 onto my desktop and have no sound at all. I've completely removed and re-installed ALSA, OSS, everything to no avail. Computer is a Gigabyte GA-MA770T-UD3P MB with AMD Phenom @ 3.4 Ghz and 4 Gb memory. Machine is dual boot with Win XP and sound works fine for Windows. I've tried the on board sound (Realtek 888) and an old PCI board. Both work ok on Windows but nothing at all on Debian.
View 4 Replies View RelatedDebian 5.0 32 bitGnomeNo sound on login. How to fix it?
View 11 Replies View RelatedI'm completely new to linux, or to debian for that matter, it's been a while since I wanted to move on from w...s, and when I finally did it, I spent 2 days just trying to make the sound work - at this time I've done every thing from pavucontrol, alsamixer, edit (and restore) /etc/pam.d/common-session...
I even messed up the os, when I reinstalled it the sound worked - brief glory, after the update it was gone again.
The headphones output works, but the normal output don't (audio, browsers, video).
I've installed debian 8.3 jessie x64
I used to be able to use skype, but hadn't used it for several months. When I tried to use it, there was no sound in or out. Recently I upgraded to lenny.
View 2 Replies View Related