I'm using HP Compaq presario CQ42 laptop n its speaker is ALTEC.I use debian 6 64bit edition.I didn't get sound through the speaker but got sound through the headphone.I fact it also happen at ubuntu 10.04LTS but when I use Linux mint 10 it got sound!!I already update my alsa at debian but still don't getting the sound through the speaker but getting sound through the headphone.
View 3 RepliesRunning Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedI can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I made a recent update to my Squeeze system and got this weird problem. mplayer, VLC and firefox (.....) all have sound. But when I try to run Amarok I get nothing. I looked into the Multimedia panel on the KDE4 system settings, and its not showing any devices at all. Previously it used to show HDA Intel etc., etc. Now the entries are completely blank. How do I get KDE to recognize my hardware? Shouldnt it pick things up automatically?
View 3 Replies View RelatedI'm relatively new to debian, but an intermediate linux user. I've just installed wheezy and I'm having trouble setting sound up. When plugging my headphones in via the motherboard, sound works fine. Great. I plugged in my USB Sound Card (Audiobox 44VSL) and no dice. It's set as card 1 under aplay -l, yet no sound. I know this box works on GNU/Linux because I used to use it in Xubuntu a couple years ago with no problems at all.
View 2 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI've got an urgent problem! I had some viruses as my program told me and in the end I had to restart my eee pc!Problem is now after it starts and you click on the log me in icon for the netbook it makes the nice hello sound, takes some time and then does the shut down (goodbye) sound. So basically the netbook booted already right? But I cant log myself in! What can I do?
View 9 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
View 2 Replies View RelatedI have a newly set up computer with 11.4 64 bit. Intel Core i5, under Sound Configuration in YaST I have '5 Series/3400 Series Chipset High Definition Audio'and 'nVidia Corporation'I have built in speakers in my screen, connected via HDMI. I hear no sound from any source, neither via HDMI, nor via a separate sound cable connected to the sound connector on the back of the computer nor via the head phone jack on the front.
View 4 Replies View RelatedI have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
sound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
View 1 Replies View RelatedI've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
Below is the output from lspci :
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies View RelatedRecently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.