Ubuntu Multimedia :: Sound Works But Not Built-in Mic For Aspire One
May 29, 2011
I have already installed my sound card.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272X Analog [ALC272X Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
Followed through this:
sudo gedit /etc/modprobe.d/alsa-base.conf
And added
options snd-hda-intel model=auto position_fix=0
After all of this, the built-in mic still doesn't work. I'm using a Aspire One 532h-2588 laptop. I need to get this working so I can use VOIP. I'm using ZoIper.
View 4 Replies
ADVERTISEMENT
Jan 16, 2010
I installed Skype onto my Toshiba Satellite running Karmic last December, and gave it a very successful test run. However, while video still works, and I can receive audio, the microphone does not pick up any sound. I don't think it could be a hardware issue- it worked so recently and my machine has experienced no tramatic events since, but I can't pick up any sound using Sound Recorder either. How could I go about diagnosing and fixing this problem?
View 1 Replies
View Related
Feb 8, 2011
So Im having problems getting sound to work on my new machine. I dont know if its a hardware problem or if its something else. Im kinda a linux amateur but have been using it for a couple years off and on. Im running
Ubuntu 10.10
Biostar N68s+ mother board
AMD athlon 64 x2 dual core processor
my video card is a MSI N8400GS.
Im using a DVI to HDMI cord and running it into my flat screen TV for my monitor. I normally just used a analog splitter from the back of the pc to the tv for my sound to work. Never had a problem before I had this machine put together.
View 1 Replies
View Related
Feb 15, 2010
i've not been able to find a solution to my issue. I have a Gateway Profile 5 All-in-One with built in speakers. Just finished a fresh install to 9.10 and all updates. I can hear sound through the headphone jack via headphones, but the internal speakers will not play anything. I've checked the volume controls, alsamixer, etc.
[Code]...
View 1 Replies
View Related
Sep 24, 2010
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
View 2 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Jun 4, 2010
When I plug in some external speakers in the headphone jack, the sound disappears. If I unplug them I can hear the sound again. Does anyone know how to workaround this problem?
I got two sound options:
1. The HDMI digital sound output of my ATI Mobility Radeon HD 5650
2. Analog sound output
I am using the analog sound in duplex mode (one stereo input one stereo output A quick solution would be great The sound of the internal speakers is really horrible xD
View 9 Replies
View Related
Jul 5, 2011
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies
View Related
Sep 8, 2011
I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
View 1 Replies
View Related
Jan 1, 2009
I have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.
In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.
[Code]...
If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?
View 14 Replies
View Related
May 17, 2011
how it is possible to make it work??On Skype i can only talk without video.T
View 1 Replies
View Related
Mar 15, 2010
I have no problem playing all videos and sound files. I have installed most codecs and propriety software. I can play all downloaded .flv videos from all the sites except one. When I open the .flv file from this site, I get "internal data stream error."
View 2 Replies
View Related
Mar 24, 2010
I have Ubuntu 9.10. Clean install. I have a cheap headset but can't get sound to come thru the headset. The mic works, but sound only comes from main speakers.
I do not have a HP, SONY or anything like that. I bought my pc barebones and built myself. So there doesn't seem to be any easy fix for my pc. Here are the specs:
Gigabyte MB model# GA-M61SME-S2 code...
View 9 Replies
View Related
Jul 8, 2010
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
View 7 Replies
View Related
Jan 8, 2011
I have a Zotac Mag Atom computer with Nvidia ION graphics. This computer i use as a HTPC hooked up to my 42" LG flatscreen via HDMI. The problem i have is that after have installed de correct graphics drivers the graphics chip only sends picture over HDMI whilst there allso is going sound.
View 2 Replies
View Related
May 9, 2011
I have a problem with these new earphones I've got.
When I play music in Banshee, I can only hear the instruments and barely the voices.
However, when I play the same files in VLC, I can hear everything 100%.
Can anyone explain what is going on?
View 6 Replies
View Related
May 31, 2011
I have sound if I use aplay or start totem using sudo but neither have sound if I try aplay or totem as ordinary user. The groups command shows my user name is a member of the audio and video groups. If I look at the /etc/group file it also shows pulse as a member of audio group.
This is a command line install from the 10.04 Alternate CD to which I installed xorg, icewm, gdm, nautilus, synaptic, totem, firefox, gstreamer, alsa, pulse, and others. Every thing works except the user audio. Totem will show videos but no sound. Totem will play MP3 music files (show the cover art and the progress) but no sound. But it all works ok, good sound, if I start Totem as root.
What am I missing? I don't expect in depth help with this installation but thought maybe something would just pop out at someone?
View 3 Replies
View Related
Feb 8, 2010
Recently I installed Renoise demo and followed their install instructions from the Renoise 2.1 quickstart guide. It said if you get any errors to do the following:
Configuring Realtime Threads:
If you get a warning message when you start Renoise, read this section. To allow Renoise to create realtime threads, which are required for low latencies with ALSA or JACK, you have to
edit the /etc/security/limits.conf file. A realtime kernel does NOT help here, it does not set the required options automatically! To enable RT thread creation via PAM open the /etc/security/limits.conf file in a text editor as root (or sudo). Then somewhere near the end of the file add:
YOURUSERNAME - rtprio 99
YOURUSERNAME - nice -10
Replace YOURUSERNAME with your username. You can discover this with the 'whoami' command.
Alternatively you could also create a group named "Audio", add your user to that group, and use '@Audio'
instead of 'YOURUSERNAME'.
Save the file. Log Out. Login. At this point it should be working. To verify that it works, launch Renoise, select ALSA and make sure the 'Realtime threads' option is on. You will get a friendly warning like the one above. If RT creation failed. Try again.
Jack Configuration
If you don't have "Jack Control (JACK Audio Connection Kit)", we recommend that you install it.
Jack Control allows easy Audio/MIDI routing with an intuitive GUI. On Ubuntu:
$ sudo apt-get install jackd qjackctl
Now you can start it from [Applications] -> [Audio] -> [Jack Control].
Click the "Setup" button, and set following values:
Change the "Priority" value to 89. (If you use realtime kernel, also add check mark beside "Realtime")
Change the "Periods/buffer" value to 3 or more.
In addition, please configure latency and other settings according to the needs of your system. Now I don't have sound where and when I used to, for example: songbird no longer plays sound tho it plays the track and no sound in web browsers aswell, like ..... plays but no sound. It has to be something simple because audio for everything was fine until editing that one file and installing that audio jack program.
View 1 Replies
View Related
Mar 17, 2010
I am using Ubuntu 9.10. My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
lspci -v
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: Gateway 2000 Device 0562
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f3010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
[Code]...
View 5 Replies
View Related
Apr 8, 2010
On Ubuntu lucid 10.04 Beta , I can see on Sound Preferences -->Input Tab , No input level sliding moving where input volume is 100% and device for sound input is Internal Audio Analog stereo. That's why I am unable to record on Sound Recorder. But the sound works where I can listen to music or video but not sound recording.
View 1 Replies
View Related
May 16, 2010
I've installed Lucid Lynx in both kubuntu and xubuntu variants, and experienced the same problem, (Note I'm also still running 9,04,on the same computer, trouble free). With 10.04, the problem is that sound playback software works initially, but drops the connection with the sound driver randomly, at times varying from a few seconds to a couple of minutes. It seems to happen regardless of whether Alsa or PulseAudio is set as default. This happens with Movie Player, VLC, Audacity, and with Flash in Firefox - they all appear to start normally, with sound, but soon fail. (Again, I don't have this problem with earlier releases, using the same computer) I know little about sound configuration.
View 5 Replies
View Related
Nov 11, 2010
every time i watch a video at ....., or use audacious to listen to music (or instead use grooveshark) the sound jumps forward automatically for some strange reason.
The other problem is the graphics. Everytime i enter a website i see the graphics but pixelated. At 100%. Well. i don't see all images or banners like this, just a few. (i.e:Google logo, flickr logo).
im using a laptop. Acer 5735Z. Mobile Intel Graphics Media Acelerator 4500MM
View 3 Replies
View Related
Nov 12, 2010
I've just installed Ubuntu and it seems the sound isnt working in it. Anyway - i have two screens. One is a tv and i want the sound to come out of there(its running through a hdmi cable).Works completely fine in windows. I havn't installed nivada plugin thingy as it stops my dual monitors working =(. So maybe this is the problem? From what i remember it worked in wubi though (without nivada drivers)I followed the troubleshoot and couldn't seem to find anything wrong?
View 5 Replies
View Related
Nov 13, 2010
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
View 1 Replies
View Related
Feb 7, 2010
I cannot find a post that matches this scenario...the id created during the install (from CD) of Karmic has fully usable sound. However, users created from the Users and Groups app do not.
I have made sure that all users are defined to the audio, pulse, pulse-audio, and pulse-rt groups. No luck.
I have followed every step I have read having to do with the alsamixer. No luck.
I have verified that alsa and linux itself are at the latest versions.
View 9 Replies
View Related
May 19, 2010
Updated Kubuntu 9.10 > Kubuntu 10.04.I have no HDMI sound andclone mode HDMI video.Computer is connected to LCD monitor with VGA and TV with HDMI.oth are using onboard hardware.HDMI audio and video were both working fine with 9.10.
Code:
uname -a
Linux HTPC 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux
[code]...
View 5 Replies
View Related
Feb 3, 2011
I recently bought an HP Pavilion Elite HPE-570t. Except for the fact that I can't get the back speaker jack to work, Maverick works great. Here's info that seems relevant:
aplay -l
card 0: PCH [HDA Intel PCH], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
I've look at Alsa Mixer. There are two tabs (IDT ID 76c7 and ATI R6xx HDMI). I turned the second one off, since I don't have any HDMI sound output device connected to the computer. On the other tab, there are five sliders (Master, PCM, Front Mi, Line and Mic). They are all turned on, and the first two are at maximum volume.
It seems to me that Ubuntu is not recognizing whatever controls the rear speaker jack.
View 1 Replies
View Related
Mar 5, 2011
Exactly as the topic says; running a MIDI file through Timidity in command-line works fine, but doing it in Rosegarden just outputs silence.
View 9 Replies
View Related
Jul 3, 2011
The sound test in Sound Preferences works, but I get no audio from Banshee.
View 2 Replies
View Related
Apr 11, 2010
Using OPenSuse 11.2 KDE 4.4 on MSI CX600 laptop. Sound only works in the hardware test, nowhere else. Everything else seems fine, even wireless just worked after an running an update.
View 4 Replies
View Related
