Debian Hardware :: Intel DH55TC / 82578DC No Networking?
Feb 17, 2010
Debian Lenny 5.0.4 Installer does not reconize the Intel 82578DC network chipset.
"vendor: 8086 ("Intel Corporation"), device: 10f0 ("82578DC Gigabit Network Connection")"
It should be supported by e1000e driver:
[URL]
According to this:
[URL]
Even CentOS (much older kernel than Debian) supports this chipset.
Is they an easy way to make this work on Debian 5 - or a reason why this isn't supported by Debian 5 yet ?
View 2 Replies
ADVERTISEMENT
Jan 13, 2010
I just purchased a new Intel DH55TC motherboard, a Core i5-661 processor, a WD Caviar Green 640GB drive, and a Linksys WMP110 card. I was able to successfully install 9.10, but every time it loads to the desktop it freezes. It seems like it may be an ACPI problem with the built-in H55 graphics card on the CPU. I hit 'e' at the grub prompt, and added 'noacpi' to the end of both the kernel (or linux?) line and the initrd line. WHen I did that, I was able to get to a point that it was fully loaded and I could move the mouse around, but as soon as I opened a menu, like 'Applications', the desktop froze again.
(NOTE: I have today's daily 10.04 on a USB, and will try that next as a live disk)
View 9 Replies
View Related
Feb 22, 2010
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies
View Related
Dec 18, 2010
I could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies
View Related
Jun 28, 2015
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Oct 1, 2010
I have recently installed Ubuntu 10.04.1 lts server on my Intel "fakeraid" (software raid) (2x250 sata).To test my RAID 1 I turned off one HD and start the system.The first screen (Intel software screen) show Status = Degraded, but the system starts normally with just one HD.Then I turned off the system and turned on the HD again, so the first screen (Intel software screen) shows Status = Rebuild. If I enter in the software raid panel the folowing message is showed: "Volumes with "Rebuild" status will be rebuilt within the operating system"The system starts normally... but this message status stays permanently even I restart the system again
View 9 Replies
View Related
May 5, 2010
If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."Does it mean I should use ia64 image for my 64-bit intel processor?
View 4 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
Dec 14, 2010
Can someone tell me what the architecture of iMac Intel Core 2 Duo is? I am trying to figure out which of the following images given on the webpage below to download:[URL]..This is the list:
[alpha][amd64][arm][armel][hppa][i386][ia64][mips][mipsel][powerpc][sparc][s390][source][multi-arch]
I think there are two different images (namely i386 and ia64) for intel-based systems, right? Which one should I download for my Intel Core 2 Duo? Is this a 64-bit architecture? Should I use amd64?
View 10 Replies
View Related
Feb 26, 2011
i was going to do this project of installing Debian on a NAS Intel SS4000e . The part i got stuck is that i cannot stop the Redboot from booting up. i.e using CTRL+C. The NAS uses the latest firmware from Intel Ver1.4 . The serial cable is tested and i used the following pin out [URL]... nsoleCable and the comport settings are as follows
View 1 Replies
View Related
Aug 24, 2011
What is the best debian iso that I should choose to install in a machine with intel core i7 second gen processor? amd64,ia64 or i386 ?
View 4 Replies
View Related
Nov 27, 2010
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
View 14 Replies
View Related
Aug 31, 2015
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
View 2 Replies
View Related
Apr 17, 2016
I have the following situation:
- Intel HD 4600 and 2 Full-HD monitors (Dell IPS, same model)
- left DisplayPort, right DVI
- Debian stretch with Linux 4.4.0-1-amd64
- XServer X11R7.7 and Cinnamon 2.8.7
… and the following problem:
When I restart the system or login after Standby, usually (not always, but often) some strange green and red pixels appear on the monitor which is connected via DVI. I can remove them by changing the display settings and restoring the extended mode again. However, most of the time the XServer crashes by trying to enable or restore the dual monitor mode (although I’m still able to start a new instance of X from another tty). The XServer also crashes every time I try to enable the extended mode from another situation.
I’ve already tried the following:
- connecting both monitors via DP (no pixes, but also crashes)
- swapping the monitors and using different cables, assuming a hardware problem first (no change)
- VGA instead DVI (works, but inelegant).
- blacklisting i915 or using the xforcevesa boot option (neither of them works, i915 starts though)
- using the nomodeset boot option (detects only one monitor and produces a fallback in software rendering mode)
View 0 Replies
View Related
May 31, 2010
I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.
View 10 Replies
View Related
Oct 21, 2010
A recent update made my intel 830 unusable with kernel modesetting enabled, so I disabled it. However, I get "No kernel modesetting driver detected" errors when I start X with the intel driver. Is there a way to make the intel driver not require KMS?
View 2 Replies
View Related
Feb 14, 2010
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies
View Related
Feb 4, 2011
I'm running Debian 6.0 with the 2.6.32-5-686-bigmem kernel. I also have just moved to a new mobo which has an 82801JI based sound card. When the snd-hda-intel modules loads I get the following error:
[14966.475400] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[14966.475445] HDA Intel 0000:00:1b.0: setting latency timer to 64
[14966.504013] hda-intel: no codecs found!
[code]....
View 1 Replies
View Related
May 4, 2009
I am confused as to which version of Debian I should download for my Laptop, it has an Intel Core 2 Duo. Will the i386 version make use of the 64bit architecture? Or are Core 2 Duo's counted as part of Intel's Itanium line?
View 4 Replies
View Related
Feb 22, 2010
I've just finished installing debian 5.0.3 on my pc and i chose the installation set for the Intel x86 architecture. Does it mean that my OS is then 32 bit and will be used to run only 32 bits applications ? I'm doing also software developments with gcc with my linux box. Using this os and the gcc tools, for this os, will my software only be 32 bits ?
View 1 Replies
View Related
Jun 19, 2011
I have a 19" and 14" flat panel. There's the onboard Intel graphics, and an old PCI S3 ViRGE card I had laying around.Figured I could make this into a dual head box.Intel is the default display in the BIOS.So far, with the attached configuration, I have the main monitor working properly at 1280x1024@60Hz. Nothing at all on the other monitor. It needs to run at 1024x768@60Hz. If it matters, running Squeeze with LXDE.
/etc/X11/xorg.conf:
Code:
Section "ServerLayout"
Identifier "Default"
Screen 0 "Intel Monitor"
Screen 1 "S3 Monitor" RightOf "Intel Monitor"
InputDevice "Mouse0" "CorePointer"
[code]....
View 3 Replies
View Related
Aug 7, 2015
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
View 4 Replies
View Related
Aug 22, 2011
the appropriate debian designation that will work on an Intel Core i5 430 M processor.
View 2 Replies
View Related
Mar 8, 2010
I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
View 2 Replies
View Related
Oct 11, 2010
any one point me to the download link of the most suitable ISO image (CD/DVD) with the latest stable Debian Lenny distro, taking into account that I have a two-processor Intel motherboard with currently one Intel Xeon 64bit processor.
View 4 Replies
View Related
Jun 8, 2011
Feel stuck between Debian and BSD worlds - not sure where to turn.
Running GNU/kFreeBSD debian 8.1-1-amd64 and base system working. Can not get X or xrandr to co-operate and use proper resolution of 1680x1050. I believe the basis of this is that it using the VESA drivers and instead should be using the INTEL drivers.
I have no 'pkg_add' for ports, plus obviously no Debian repos will help for this .... unless there are some specific kFreeBSD repos I dont know about? I can post more details on the system, but am hoping that there are other options besides compiling. I can do that if need be, but not even sure which one to use. Will these work on this system? [URL]
user@debian:~$ uname -a
GNU/kFreeBSD debian 8.1-1-amd64 #0 Mon Feb 21 22:03:13 UTC 2011 x86_64 amd64 Intel(R) Pentium(R) 4 CPU 3.00GHz GNU/kFreeBSD
user@debian:~$ lsb_release -a
No LSB modules are available.
[Code].....
View 2 Replies
View Related
Jun 7, 2010
Ok first off, I love debian, but on my new notebook I am getting a little frustrated with the terrible, video performance.Direct rendering is enabled on both systems, and openGL is working (I can if I wanted to use compiz etc...) fine on both systems, just running slow on debian.
I have tried Lenny, Squeeze and Sid, I have compiled the intel driver (and Mesa3D) from git and got it working (I am sure its working because its given me a slight boost), I ahve also tried building the latest stable (and RC2) kernel.If I install ubuntu 9.10 I get pretty decent 3D performance, its not ground breaking, but hey its an intel chipset so I am not expecting to kick the latest nvidia / ati card's backside.I really dont want to use ubuntu, I find it unstable when compaired to debian, but I also want to be able to play the odd game when I am bored, and at the moment I just cant do that under debian
View 12 Replies
View Related
Aug 3, 2010
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
View 5 Replies
View Related
