I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
View 2 Replies
Which architecture to use with an Intel Core 2 Duo processor?
View 3 Replies View RelatedI have installed Ubuntu10.04.1LTS in my Desktop amd64 computer. I also downloaded the same version for i386 processors and tried to install the OS for my HCL Pentium Dual Core T4300 @2.1Ghz 4GB RAM laptop, details of which are given in the following two screenshots: dscf0105.jpg and dscf0106.jpg I already have Debian Lenny 5.0.4 installed on the laptop dscf0104.jpg and the laptop works fine when I run the Debian OS or Knoppix liveCD image stored in the HDD of the laptop. We all know that the Ubuntu LTS live CD leads to the following option: Screenshot.jpg However, in my laptop the operation freezes before we can reach the above option. The screenshot explains the situation: dscf0107.jpg I know I could always use one of the alternate downloads and install the OS from it. But my point of contention is: where is the matter going wrong? Can't we use the graphical installer CD to do a CUI installation?
View 8 Replies View RelatedCompiling a kernel on this machine first time and get upset with which processor family/type/options to select for my Intel Pentim Dual Core T2390.Does sombody know how to configure kernel better for this processor?
View 5 Replies View RelatedI'm having a weird problem (2.6.32-2-686-bigmem , sid):
Frequency scaling works on CPU 1 but not on CPU 0.
This is regardless of application, the Gnome applet and cpufreq-selector both fail
I've just finished installing debian 5.0.3 on my pc and i chose the installation set for the Intel x86 architecture. Does it mean that my OS is then 32 bit and will be used to run only 32 bits applications ? I'm doing also software developments with gcc with my linux box. Using this os and the gcc tools, for this os, will my software only be 32 bits ?
View 1 Replies View RelatedI could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies View RelatedI have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.
I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).
I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.
I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?
Can someone tell me what the architecture of iMac Intel Core 2 Duo is? I am trying to figure out which of the following images given on the webpage below to download:[URL]..This is the list:
[alpha][amd64][arm][armel][hppa][i386][ia64][mips][mipsel][powerpc][sparc][s390][source][multi-arch]
I think there are two different images (namely i386 and ia64) for intel-based systems, right? Which one should I download for my Intel Core 2 Duo? Is this a 64-bit architecture? Should I use amd64?
What is the best debian iso that I should choose to install in a machine with intel core i7 second gen processor? amd64,ia64 or i386 ?
View 4 Replies View Relatedthe appropriate debian designation that will work on an Intel Core i5 430 M processor.
View 2 Replies View Relatedare there real advantages for me in the PAE kernel? Execute Disable Bit/NX bit? Are viruses in linux coming up? Would you change to the Physical Address Extension? Or is this just enabled in the default kernel of openSUSE now?Since a update to openSUSE 11.2 via a new installation I use the default kernel. As I remember before that it was the PAE kernel. I have only 2 GiB memory on my laptop.
Physical Address Extension - Wikipedia, the free encyclopedia
Intel� Pentium� M Processor 740 (2M Cache, 1.73 GHz, 533 MHz FSB) with SPEC Code(s) SL7S8, SL7SA, SL86B
1% performance overhead of paravirt_ops on native kernels - linux.kernel | Google Groups
On my lenovo g560 i have Intel core i3-330m, i have both debian squeeze and windows 7 installed on my laptop.Today i noticed that while playing music (amarok) and playing a flash game (google chrome, game - tetris, lol (: ) the processor core temperature was around 70-71deg celsius.I restarted and booted windows 7, doing the same thing (music and tetris) the processor temperature is aournd 54-55deg celsius.Can anyone explain why the high temperature when running debian?
View 6 Replies View RelatedWhy can't I find a HCL?
Does Fedora 14 support ASUS P5KPL SE motherboard?
What is the best board to use with Fedora and a INTEL PENTIUM D E5500 processor?
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View RelatedI've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies View RelatedKernel 2.6.21.5, slackware 12.0 as 2.17 [I am speaking here about 80x86 processors, with their segment registers SS, DS, CS, ES.] In a source file for as, I wrote
Code:
.section _STACK
.rept 4096
.word 0
.endr
Now, in the .text section, I want to initialize SS, the stack segment, to point to the _STACK section. In other assemblers, there was a special section for the stack, and the linker cared about initializing SS. Here I use a common section for the stack. For a segment such as DS, I could write
mov ax,_DATA
mov ds,ax
But I don't think mov ax,_STACK would do with as/ls.how do I initialize SS?
I have a 19" and 14" flat panel. There's the onboard Intel graphics, and an old PCI S3 ViRGE card I had laying around.Figured I could make this into a dual head box.Intel is the default display in the BIOS.So far, with the attached configuration, I have the main monitor working properly at 1280x1024@60Hz. Nothing at all on the other monitor. It needs to run at 1024x768@60Hz. If it matters, running Squeeze with LXDE.
/etc/X11/xorg.conf:
Code:
Section "ServerLayout"
Identifier "Default"
Screen 0 "Intel Monitor"
Screen 1 "S3 Monitor" RightOf "Intel Monitor"
InputDevice "Mouse0" "CorePointer"
[code]....
I've been running Fedora 10 since it came out (I'm doing some numerical modeling for my thesis), but I've got some questions about a new box I'm going to build. I am going to build a new 64bit machine, dual boot with Win7 and Poseidon Linux (waiting for the 64bit version to come out later this year).is there an advantage to having each OS reside on a different physical HDD? meaning - 1 hard drive for Win and 1 hard drive for Linux and just decide which HDD to boot when I turn the machine on. -or is it better to have them reside on the same HDD and just have a separate HDD for data / storage? -is there a good resource to describe some optimal architecture's? I've searched through the forums and haven't found anything that concise / on-target / similar. As additional info: this box will be my livelihood, so right now, money is not really an object in terms of HDDs, etc.
View 3 Replies View RelatedI have installed Debian on my intel iMac, I installed grub first in my root partition and then in the Debian partition. When I boot my Mac, rEFIt brings me to the boot page and shows the Linux drive, but when I choose it, it tries to start up and then gives me the line "Not a bootable drive" and just hangs. How to get this to boot?
View 3 Replies View RelatedI'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
I've read that you can use specialized kernels for your hardware, and I was wondering if there's a kernel I can use for my Intel Core 2 duo. I read in a previous post about using a "smp" variant, but kinda wanted some confirmation. Here's CPU info:
Code:
processor : 0
vendor_id : GenuineIntel
[code]....
This is a general technical question about Symmetric Multiprocessing in relation to the Intel Core i7. (Actually, it's more about Hyperthreading than i7.) My understanding is that Symmetric Multiprocessing means that the operating system treats all processors as identical, and therefore it can assign a new thread to any free processor.
And that i7 appears to the OS as 8 processors, 0 thru 7. But from a performance perspective, the 8 processors are not identical, because each core has 1 execution engine plus the ability to store the state of 2 threads. This is, as far as I understand it, the essence of Intel's Hyperthreading. So each execution engine can quickly switch between 2 threads without bothering the OS, but only one thread at a time actually executes.
Suppose, for example, all processors are idle and the OS assigns one thread to processor 0, then has a second thread to assign. Since all free processors are considered identical, the OS could assign the second thread to any free processor, say 1. The result would be that both threads are competing for the same execution engine, while the other 3 cores remain idle. Is my understanding of SMP correct?
If so, does linux SMP take full advantage of Intel Hyperthreading (which existed also in earlier Intel processors)? That is, does linux SMP assign threads in such a way that it attempts to choose an idle execution engine? I don't know what algorithm SMP actually uses to choose the processor. For example, it could be the first free processor, or any free processor chosen at random.How about Windows? How does it handle the situation?
Edit: I have also posted this question in linuxforums and phoronix forums. I hope this doesn't count as cross-posting, since those forums are not on this site and they have different readership. If it is indeed cross-posting, please let me know and I will avoid doing it in future.
I have a new hp g62 notebook pc with intel core i5 m469 @ 2.53 GHz, 64 bit operating system. I wish to use GCC to develop for msp430's, arm7/9. Which distro would work best for this hardware?
View 2 Replies View Related
